Network hackerspace Strassen

From syn2cat - HackerSpace.lu
Revision as of 16:56, 13 October 2010 by Hardfalcon (Talk | contribs)

Jump to: navigation, search

This page hosts details on our internal network, wired as well as wireless.

Contents

Overview

Every hackerspace has a network to connect to the Internets, so does syn2cat

Bring your laptop or use one of the available PCs, plug it in and off you go. There's also wireless LAN available.


Layout

Here's the current layout in fancy ASCII art.

DSL -- thomson -- Lusitania :::: miniswitch == wall ports in ADHS rooms
                      ||
                      ||
                   3com Rack
                      "
                      "
                      "
                      "
                   3com Core == wall ports in syn2cat rooms
                      |         ||
                      |         ||
                      |       OpenDuino, switches
                      |
                   dd-wrt .... dd-wrt -- photoborg
                      ||      
                      ||        
                   HPprinter


Legend:

  * -- single cable
  * == more than one cable
  * "" fiber trunk
  * ::: VLAN
  * ... wlan cable

IP

We provide both IPv4 and IPv6 connectivity in the hackerspace.

Wireless

We have two access points (APs).
One of them operates in WPA2-Enterprise mode, the other in WPA2-Personal. The WPA2-Personal AP uses the formerly published pre-shared-password (you can find it in the space).

The WPA2-Enterprise AP uses a radius server for authenticating users with their WIKI account.
Only paying sy2cat members are able to use their WIKI login to access this AP.

Use the following settings:
Security: WPA2 Enterprise
Authentication: Tunneled TLS (TTLS)
Inner authentication: PAP
Username: <wiki-user>
Password: <wiki-password>

or

Security: WPA2 Enterprise
Authentication: PEAP
Inner authentication: MSCHAPv2
Username: <syn2cat-user>
Password: <syn2cat-password>


Be sure to use exactly those settings, else it will not work.
Note: PEAP+MSCHAPv2 will only work if you have changed your password on the syn2cat server after the 12th of October. Ask an admin for more information.

SSL certificates

https://www.hackerspace.lu/certs/lusitania.int.hackerspace.lu_infr.crt (updated 2010.10.12)

OS compatibility

  • Linux works out of the box
  • Windows works out of the box
  • OSX works out of the box
  • iphone works out of the box
  • Android works fine with v1.6+
  • Symbian works fine
  • Maemo OS works fine

WICD template

Save this as "/etc/wicd/encryption/templates/eap-ttls" and add the filename to "/etc/wicd/encryption/templates/active".

name = EAP-TTLS
author = username
version = 1
require identity *Identity password *Password auth *Authentication
-----
ctrl_interface=/var/run/wpa_supplicant
network={
        ssid="$_ESSID"
        scan_ssid=$_SCAN
        eap=TTLS
        key_mgmt=WPA-EAP
        identity="$_IDENTITY"
        password="$_PASSWORD"
        phase2="auth=$_AUTH"
}

Dev Links

Personal tools
Namespaces

Variants
Actions
Navigation
syn2cat
Hackerspace
Activities
Initiatives
Community
Tools
Tools