DT 800

There is no link to this page anywhere on the wiki! Nobody will be able to find it, unless she or he knows this page's name. Please add a link to this page in an appropriate location.

---

DT 800 RFID Reader

We got a RFID reader from primion

Here is some information about the switch settings and other stuff

Device Properties

• IP: 192.168.178.13
• Subnet: 24 (255.255.255.0)
• MAC: 00-30-FB-10-36-2B
• Password for access via telnet 00000 (can be changed when you access it trough the display on the device

Swich settings

Here are the settings of the switch inside the device in binary 0= down 1= up

In Normal state:

10110000

In the state were settings appear on the display (in case you mess something up with the ip or RS232 settings)

00000001

Accessing via telnet

To access the device using telnet you have to set your computers ip to something in the range of 192.168.178/24 The devices IP is 192.168.178.13

You will be asked a password. It is 00000

Now you will get almost same settings as on the display