https://wiki.syn2cat.lu/w/api.php?action=feedcontributions&user=Stereo&feedformat=atomsyn2cat - HackerSpace.lu - User contributions [en]2024-03-28T17:41:28ZUser contributionsMediaWiki 1.19.24//wiki.syn2cat.lu/wiki/Extraordinary_General_Assembly_July_2017Extraordinary General Assembly July 20172017-07-07T14:50:12Z<p>Stereo: Edited automatically from page Extraordinary General Assembly July 2017.</p>
<hr />
<div>{{Event<br />
|attendees=Sid, Macfreak109, Mafo, Marina, Thierry, Tgo, Stereo<br />
|eventtype=Event<br />
|subtitle=Extraordinary General Assembly July 2017<br />
|description=Extraordinary General Assembly (GA).<br />
|contact=Gunstick, Marina, Sid,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2017/07/11 19:30<br />
|till=2017/07/11 22:00<br />
|location=Level2<br />
|logo=<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}<br />
==Introduction==<br />
* The date was decided on office meeting on the 22th June 2016.<br />
<br />
==Preparations==<br />
Some items need to be done before the assembly<br />
<br />
* prepare voting sheets and result sheets<br />
* reserve a room<br />
<br />
==Agenda==<br />
* confirm the administrative council's decision to exclude a member from syn2cat a.s.b.l.<br />
* confirm the consultancy of a lawyer to defend the association in case of claim of damages<br />
* decide on measures to prevent future thefts<br />
* election of a new office<br />
<br />
=== Candidates ===<br />
To be candidate, you have to send an email to office@hackerspace.lu indicating if you want to be President, Vice-President, Treasurer or office member.<br />
<br />
{| class="wikitable" border="1"<br />
|-<br />
! who !! post !! email date <br />
|-<br />
<br />
| || ||<br />
|-<br />
| || ||<br />
|-<br />
| || ||<br />
|-<br />
| || ||<br />
|-<br />
|}<br />
<br />
=== Vote delegations ===<br />
Remember: do not announce delegations to people already listed below: they either are not coming or already have a delegation. First ask personally the delegate if s/he accepts.<br/><br />
Your proxy '''must''' bring a valid proof of delegation to the GA or you have to send a PGP signed email to office@hackerspace.lu<br />
{| class="wikitable" border="1"<br />
|-<br />
! member's pseudo !! vote delegated to !! verified via<br />
|-<br />
| kwisatz || Thierry || GPG<br />
|-<br />
| || || <br />
|-<br />
| || || <br />
|-<br />
| || || <br />
|}</div>Stereo//wiki.syn2cat.lu/wiki/UltimakerUltimaker2016-04-12T16:19:21Z<p>Stereo: /* TODO (more or less in that order): */ dual fan</p>
<hr />
<div>== Troubleshooting ==<br />
<br />
You might find this excellent visual guide useful:<br />
<br />
http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide<br />
<br />
== Usage ==<br />
[[File:Ultimaker-syn2cat.jpg|320px|right]]<br />
=== How to print things ===<br />
<br />
TIMTOWTDI, but this works.<br />
<br />
* Download or create something. That's coming as an STL file<br />
* Power on the Ultimaker (switch on the side)<br />
* Start the cura software<br />
* Open the object in Cura<br />
* Insert the SD card from the Ultimaker into your computer<br />
* click "save to SD card"<br />
* Eject the card, insert it into the Ultimaker<br />
* From the Ulticontroller menu, choose "Print from SD", then your file.<br />
<br />
Interesting changes in the "full settings" mode. These are not dogma, just what worked for some members. See the visual troubleshooting guide above to understand what effect these have.<br />
<br />
* fill density: to make really light objects or really heavy and stable ones.<br />
* print speed: current trial which works is 80<br />
* printing temperature: 210 is still fine<br />
* raft: only if you have a very narrow but tall object<br />
* skirt: sometimes one round is not enough, so put 2<br />
<br />
* expert menu<br />
** fan speed min: 20<br />
** bridge speed: 150 (can help to get overhang more straight)<br />
** retrace on jumps only: if print is not nice but contains lots of jumps, try to disable this<br />
** enable hop: this can help but slows priting down a lottle<br />
<br />
=== When working with the Ultimaker, pay attention to the following things: ===<br />
* When printing small objects and objects with a very small base, ''don't print on a raft'', especially for PLA. Rafts are just a waste of plastic with a well-calibrated Z axis. Gunstick's Raft Exception™ is narrow but tall objects that can easily be kicked over; a raft can make them more stable. Newer Cura versions even have an experimental option to avoid kicking the object by moving the platform down.<br />
* Be careful not to lower or raise the bed by bumping into it. The Z axis has been carefully calibrated. Verify that there is no space between the screws and the top of the bed. But don't turn the screws! Unless you've messed it up.<br />
* Clean the head and bed with isopropyl alcohol before you start. If you want to be extra nice, clean the bed when you're done.<br />
* If the extrusion head doesn't heat, flick the switch next to the USB port. If you hear the ventilation, then it's on!<br />
* Sometimes the plastic won't stick to the surface. Cancel the print and use the controller (little box hanging on the machine) to return the extrusion head to "Auto Home". To do this, navigate (using push and scroll on the wheel) into the Menu->Prepare->Auto Home. To make it work, the plastic has to stick to the surface before it makes the skirt outline, or it will only start to stick at a random moment before or during the skirt, with a high risk of leaving a small drop of extra plastic. Try cleaning the bed with alcohol. If that fails, try helping the plastic filament down on the bed when the head initially lowers, or re-taping the bed. But this probably means the Z axis is de-calibrated. You can also change the parameter to do 2 or 3 skirt outlines.<br />
*Don't forget to take the object off the platform before printing the next one. Doh! In case you do forget, the emergency off is the power switch.<br />
*Put scrap plastic into the container glass. Maybe one day it will be possible to recycle.<br />
<br />
=== Does it cost something? ===<br />
You can configure the printing cost directly into Cura. After prepare print, the approximate weight and length of plastic is calculated and there you can then see the cost. To configure:<br />
* File -> Preferences<br />
* price/kg: 50<br />
* price/m: 0.5<br />
You don't need to pay if the print is only for some cents. Just when getting into massive amounts (some euros) it would be cool to donate a bit. There is a piggybank (Sparschwein) at the soldering table.<br />
<br />
=== how to on linux ===<br />
It is preferable to have your own setup on your own machine, or maybe on a dedicated account on a syn2cat computer. So you can have your own settings and don't need to fiddle around with the cura profiles which then get messed up by the next user.<br />
<br />
==== Sketchup ====<br />
Only working on intel/amd as it's a windows program. If you have windows, just use windows!<br />
(I know there is 3D software for linux, but I'm lost in how to use that)<br />
* apt-get install wine libwine-gl<br />
* download sketchup 8 free http://www.sketchup.com/download/all<br />
* wine sketchupwen.exe<br />
* run it: vblank_mode=0 wine '~/.wine/drive_C/Program Files (x86)/Google/Sketchup/Sketchup.exe'<br />
* consult this http://wiki.winehq.org/GoogleSketchup (you need probably that registry: "wine regedit") error "SketchUp was unable to initialize OpenGL!], run regedit, open [HKEY_CURRENT_USER\Software\Google\SketchUp8\GLConfig\Display], and change "HW_OK" to 1<br />
* add module for STL export http://www.guitar-list.com/download-software/convert-sketchup-skp-files-dxf-or-stl chose the *rbz file) then Window->Preferences > Extensions > Install Extension<br />
* draw object in millimeters<br />
* export in millimeters<br />
<br />
==== Cura ====<br />
* instructions http://wiki.ultimaker.com/Cura<br />
* it's kinda working http://wiki.ultimaker.com/Installing_Cura_on_Linux (you need to do that pypy thing if you're 64 bit)<br />
Cura14 has a bad dependency and does not install on 64 bit. You can install like this<br />
mkdir c<br />
dpkg-deb -x Cura-14.01-debian.deb c<br />
dpkg-deb --control Cura-14.01-debian.deb c/DEBIAN<br />
sed -i 's/Architecture: i386/Architecture: all/' c/DEBIAN/control<br />
dpkg -b c Cura-14.01-debian_all.deb<br />
rm -r c<br />
sudo gdebi Cura-14.01-debian_all.deb<br />
<br />
* If you are unable to print (clicking on the print button does not manifest a window), you can prepare print and write your gcode file to the SD card<br />
* To make the print button work, set this environment<br />
<pre><br />
export PYTHONPATH="$PYTHONPATH":/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/<br />
</pre><br />
<br />
==== Parameters ====<br />
Tweaking the parameters can be very useful, so here are some variables from the INI file<br />
<br />
<br />
bottom_layer_speed = 20<br />
bottom_thickness = 0.1<br />
brim_line_count = 10<br />
cool_head_lift = False<br />
cool_head_lift = True<br />
cool_min_feedrate = 10<br />
cool_min_layer_time = 5<br />
cool_start.gcode = <br />
fan_enabled = True<br />
fan_full_height = 0.5<br />
fan_full_height = 2<br />
fan_speed = 100<br />
fan_speed_max = 100<br />
filament_diameter = 2.85<br />
filament_diameter2 = 2.85<br />
filament_flow = 100.0<br />
fill_density = 15<br />
fill_overlap = 33<br />
layer0_width_factor = 100<br />
layer_height = 0.15<br />
nozzle_size = 0.4<br />
ooze_shield = False<br />
overlap_dual = 0.15<br />
platform_adhesion = Brim<br />
print_bed_temperature = 70<br />
print_speed = 100<br />
print_temperature = 220<br />
print_temperature2 = 220<br />
raft_airgap = 0.22<br />
raft_base_linewidth = 1.0<br />
raft_base_thickness = 0.3<br />
raft_interface_linewidth = 0.4<br />
raft_interface_thickness = 0.27<br />
raft_line_spacing = 3.0<br />
raft_margin = 5.0<br />
raft_surface_layers = 2<br />
retraction_amount = 4.5<br />
retraction_combing = True<br />
retraction_dual_amount = 16.5<br />
retraction_enable = True<br />
retraction_hop = 0.0<br />
retraction_minimal_extrusion = 2<br />
retraction_min_travel = 10<br />
retraction_min_travel = 1.5<br />
retraction_speed = 40.0<br />
skirt_gap = 3.0<br />
skirt_line_count = 3<br />
skirt_minimal_length = 150.0<br />
solid_bottom = True<br />
solid_layer_thickness = 1<br />
solid_top = True<br />
support_angle = 60<br />
support_dual_extrusion = Both<br />
support_fill_rate = 15<br />
support = None<br />
support_type = Grid<br />
support_xy_distance = 0.7<br />
support_z_distance = 0.15<br />
travel_speed = 150.0<br />
wall_thickness = 0.8<br />
wipe_tower = False<br />
wipe_tower_volume = 15<br />
<br />
==== printing from SD card ====<br />
* switch ultimaker on<br />
* navigate to card menu<br />
* select file<br />
* printer heats up, and prints the object<br />
<br />
== Tasks ==<br />
<br />
=== TODO (more or less in that order): ===<br />
* [https://ultimaker.com/en/resources/20503-ultimaker-original-dual-fan-upgrade Dual fan upgrade] - can it be done for dual heads?<br />
* [http://www.thingiverse.com/thing:40041 Spring-loaded NEMA 17 steppers / belt tensioner]<br />
* [http://www.thingiverse.com/thing:25950 Ulti-Foot]<br />
* [http://www.thingiverse.com/thing:29469 Handle]<br />
* [http://www.thingiverse.com/thing:21184 Printhead cover - but isn't that unneeded inertia on the head?]<br />
* Collection of [http://www.thingiverse.com/thing:39973 tools]<br />
* Some kind of [http://www.thingiverse.com/thing:18098 Tool thing] or awesome [http://www.thingiverse.com/thing:41661 laser-cut Ultimaker Tool Holder]<br />
* [http://www.thingiverse.com/thing:22719 UltiController Clamp]<br />
* [https://www.youtube.com/watch?v=v8f_mmFUyug Get PLA to stick to your Printrbot build platform with Hairspray or ABS juice]<br />
* Wire the dioder directly to the ultimaker power supply<br />
* Put a webcam so to watch remotely. Doodle3d can be made into a webcam server or just use a simple wifi camera.<br />
<br />
See also http://wiki.ultimaker.com/Calibrate<br />
<br />
=== DONE: ===<br />
* [http://www.thingiverse.com/thing:25436 Locking key for Ultimaker filament feeder]<br />
* [http://www.thingiverse.com/thing:32044 curious llama belt tensioner]<br />
* [http://www.thingiverse.com/thing:32372 Ultimaker: Z-axis end-switch fine-adjuster, Switch mount (or some variation of that idea)]<br />
* [https://www.youtube.com/watch?v=LkkuDQO9OsU Ultimaker Z axis calibration]<br />
* [http://forum.ultimaker.com/viewtopic.php?t=161 Re-greased fan to reduce noise] (which wasn't very successful)<br />
* [http://www.thingiverse.com/thing:33286 Ulticontroller rotary dial]<br />
* [http://www.thingiverse.com/thing:40583 Ikea Dioder LED strip on Ultimaker]<br />
* Connect [http://www.doodle3d.com/ Doodle 3D] permanently to create a network printer or just [http://connect.doodle3d.com/ doodling] with your smartphone<br />
<br />
== Some links on the ''Spaweck'': ==<br />
* [https://shop.ultimaker.com/en/ultimaker-kit-new.html kit at 1214 EUR] + VAT + shipping<br />
* [http://davedurant.wordpress.com/2011/10/12/ultimaker-faq-but-what-about-the-quality-of-prints/ Ultimaker FAQ: but what about the quality of prints]<br />
* [http://wiki.ultimaker.com/Main_Page Ultimaker Wiki] with [http://wiki.ultimaker.com/Ultimaker_specs_and_features specs and features] and a [http://wiki.ultimaker.com/Frequently_asked_Questions FAQ]<br />
* [http://reprap.org/wiki/Ultimaker Reprap wiki on the Ultimaker]<br />
* [http://wiki.meta-concepts.com/display/UM/Home This is the home of my modified Ultimaker 3D Printer]<br />
* [http://wiki.ultimaker.com/No_strings_attached No strings attached]<br />
* [http://techwall.net/analyzing-your-first-print Analyzing your first print]<br />
* [https://wiki.raumzeitlabor.de/wiki/Ultimaker Raumzeitlabor's Ultimaker]<br />
<br />
== Paint gallery: ==<br />
* [http://umforum.ultimaker.com/index.php?/gallery/album/7-my-ultimaker/ Cool blue paint job]<br />
* [http://instagram.com/p/TYwjVQn7Fo/ Cool black paint job]</div>Stereo//wiki.syn2cat.lu/wiki/UltimakerUltimaker2015-10-23T07:04:23Z<p>Stereo: Updated with new guides, matched what new versions of Cura do</p>
<hr />
<div>== Troubleshooting ==<br />
<br />
You might find this excellent visual guide useful:<br />
<br />
http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide<br />
<br />
== Usage ==<br />
[[File:Ultimaker-syn2cat.jpg|320px|right]]<br />
=== How to print things ===<br />
<br />
TIMTOWTDI, but this works.<br />
<br />
* Download or create something. That's coming as an STL file<br />
* Power on the Ultimaker (switch on the side)<br />
* Start the cura software<br />
* Open the object in Cura<br />
* Insert the SD card from the Ultimaker into your computer<br />
* click "save to SD card"<br />
* Eject the card, insert it into the Ultimaker<br />
* From the Ulticontroller menu, choose "Print from SD", then your file.<br />
<br />
Interesting changes in the "full settings" mode. These are not dogma, just what worked for some members. See the visual troubleshooting guide above to understand what effect these have.<br />
<br />
* fill density: to make really light objects or really heavy and stable ones.<br />
* print speed: current trial which works is 80<br />
* printing temperature: 210 is still fine<br />
* raft: only if you have a very narrow but tall object<br />
* skirt: sometimes one round is not enough, so put 2<br />
<br />
* expert menu<br />
** fan speed min: 20<br />
** bridge speed: 150 (can help to get overhang more straight)<br />
** retrace on jumps only: if print is not nice but contains lots of jumps, try to disable this<br />
** enable hop: this can help but slows priting down a lottle<br />
<br />
=== When working with the Ultimaker, pay attention to the following things: ===<br />
* When printing small objects and objects with a very small base, ''don't print on a raft'', especially for PLA. Rafts are just a waste of plastic with a well-calibrated Z axis. Gunstick's Raft Exception™ is narrow but tall objects that can easily be kicked over; a raft can make them more stable. Newer Cura versions even have an experimental option to avoid kicking the object by moving the platform down.<br />
* Be careful not to lower or raise the bed by bumping into it. The Z axis has been carefully calibrated. Verify that there is no space between the screws and the top of the bed. But don't turn the screws! Unless you've messed it up.<br />
* Clean the head and bed with isopropyl alcohol before you start. If you want to be extra nice, clean the bed when you're done.<br />
* If the extrusion head doesn't heat, flick the switch next to the USB port. If you hear the ventilation, then it's on!<br />
* Sometimes the plastic won't stick to the surface. Cancel the print and use the controller (little box hanging on the machine) to return the extrusion head to "Auto Home". To do this, navigate (using push and scroll on the wheel) into the Menu->Prepare->Auto Home. To make it work, the plastic has to stick to the surface before it makes the skirt outline, or it will only start to stick at a random moment before or during the skirt, with a high risk of leaving a small drop of extra plastic. Try cleaning the bed with alcohol. If that fails, try helping the plastic filament down on the bed when the head initially lowers, or re-taping the bed. But this probably means the Z axis is de-calibrated. You can also change the parameter to do 2 or 3 skirt outlines.<br />
*Don't forget to take the object off the platform before printing the next one. Doh! In case you do forget, the emergency off is the power switch.<br />
*Put scrap plastic into the container glass. Maybe one day it will be possible to recycle.<br />
<br />
=== Does it cost something? ===<br />
You can configure the printing cost directly into Cura. After prepare print, the approximate weight and length of plastic is calculated and there you can then see the cost. To configure:<br />
* File -> Preferences<br />
* price/kg: 50<br />
* price/m: 0.5<br />
You don't need to pay if the print is only for some cents. Just when getting into massive amounts (some euros) it would be cool to donate a bit. There is a piggybank (Sparschwein) at the soldering table.<br />
<br />
=== how to on linux ===<br />
It is preferable to have your own setup on your own machine, or maybe on a dedicated account on a syn2cat computer. So you can have your own settings and don't need to fiddle around with the cura profiles which then get messed up by the next user.<br />
<br />
==== Sketchup ====<br />
Only working on intel/amd as it's a windows program. If you have windows, just use windows!<br />
(I know there is 3D software for linux, but I'm lost in how to use that)<br />
* apt-get install wine libwine-gl<br />
* download sketchup 8 free http://www.sketchup.com/download/all<br />
* wine sketchupwen.exe<br />
* run it: vblank_mode=0 wine '~/.wine/drive_C/Program Files (x86)/Google/Sketchup/Sketchup.exe'<br />
* consult this http://wiki.winehq.org/GoogleSketchup (you need probably that registry: "wine regedit") error "SketchUp was unable to initialize OpenGL!], run regedit, open [HKEY_CURRENT_USER\Software\Google\SketchUp8\GLConfig\Display], and change "HW_OK" to 1<br />
* add module for STL export http://www.guitar-list.com/download-software/convert-sketchup-skp-files-dxf-or-stl chose the *rbz file) then Window->Preferences > Extensions > Install Extension<br />
* draw object in millimeters<br />
* export in millimeters<br />
<br />
==== Cura ====<br />
* instructions http://wiki.ultimaker.com/Cura<br />
* it's kinda working http://wiki.ultimaker.com/Installing_Cura_on_Linux (you need to do that pypy thing if you're 64 bit)<br />
Cura14 has a bad dependency and does not install on 64 bit. You can install like this<br />
mkdir c<br />
dpkg-deb -x Cura-14.01-debian.deb c<br />
dpkg-deb --control Cura-14.01-debian.deb c/DEBIAN<br />
sed -i 's/Architecture: i386/Architecture: all/' c/DEBIAN/control<br />
dpkg -b c Cura-14.01-debian_all.deb<br />
rm -r c<br />
sudo gdebi Cura-14.01-debian_all.deb<br />
<br />
* If you are unable to print (clicking on the print button does not manifest a window), you can prepare print and write your gcode file to the SD card<br />
* To make the print button work, set this environment<br />
<pre><br />
export PYTHONPATH="$PYTHONPATH":/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/<br />
</pre><br />
<br />
==== Parameters ====<br />
Tweaking the parameters can be very useful, so here are some variables from the INI file<br />
<br />
<br />
bottom_layer_speed = 20<br />
bottom_thickness = 0.1<br />
brim_line_count = 10<br />
cool_head_lift = False<br />
cool_head_lift = True<br />
cool_min_feedrate = 10<br />
cool_min_layer_time = 5<br />
cool_start.gcode = <br />
fan_enabled = True<br />
fan_full_height = 0.5<br />
fan_full_height = 2<br />
fan_speed = 100<br />
fan_speed_max = 100<br />
filament_diameter = 2.85<br />
filament_diameter2 = 2.85<br />
filament_flow = 100.0<br />
fill_density = 15<br />
fill_overlap = 33<br />
layer0_width_factor = 100<br />
layer_height = 0.15<br />
nozzle_size = 0.4<br />
ooze_shield = False<br />
overlap_dual = 0.15<br />
platform_adhesion = Brim<br />
print_bed_temperature = 70<br />
print_speed = 100<br />
print_temperature = 220<br />
print_temperature2 = 220<br />
raft_airgap = 0.22<br />
raft_base_linewidth = 1.0<br />
raft_base_thickness = 0.3<br />
raft_interface_linewidth = 0.4<br />
raft_interface_thickness = 0.27<br />
raft_line_spacing = 3.0<br />
raft_margin = 5.0<br />
raft_surface_layers = 2<br />
retraction_amount = 4.5<br />
retraction_combing = True<br />
retraction_dual_amount = 16.5<br />
retraction_enable = True<br />
retraction_hop = 0.0<br />
retraction_minimal_extrusion = 2<br />
retraction_min_travel = 10<br />
retraction_min_travel = 1.5<br />
retraction_speed = 40.0<br />
skirt_gap = 3.0<br />
skirt_line_count = 3<br />
skirt_minimal_length = 150.0<br />
solid_bottom = True<br />
solid_layer_thickness = 1<br />
solid_top = True<br />
support_angle = 60<br />
support_dual_extrusion = Both<br />
support_fill_rate = 15<br />
support = None<br />
support_type = Grid<br />
support_xy_distance = 0.7<br />
support_z_distance = 0.15<br />
travel_speed = 150.0<br />
wall_thickness = 0.8<br />
wipe_tower = False<br />
wipe_tower_volume = 15<br />
<br />
==== printing from SD card ====<br />
* switch ultimaker on<br />
* navigate to card menu<br />
* select file<br />
* printer heats up, and prints the object<br />
<br />
== Tasks ==<br />
<br />
=== TODO (more or less in that order): ===<br />
* [http://www.thingiverse.com/thing:40041 Spring-loaded NEMA 17 steppers / belt tensioner]<br />
* [http://www.thingiverse.com/thing:25950 Ulti-Foot]<br />
* [http://www.thingiverse.com/thing:29469 Handle]<br />
* [http://www.thingiverse.com/thing:21184 Printhead cover - but isn't that unneeded inertia on the head?]<br />
* Collection of [http://www.thingiverse.com/thing:39973 tools]<br />
* Some kind of [http://www.thingiverse.com/thing:18098 Tool thing] or awesome [http://www.thingiverse.com/thing:41661 laser-cut Ultimaker Tool Holder]<br />
* [http://www.thingiverse.com/thing:22719 UltiController Clamp]<br />
* [https://www.youtube.com/watch?v=v8f_mmFUyug Get PLA to stick to your Printrbot build platform with Hairspray or ABS juice]<br />
* Wire the dioder directly to the ultimaker power supply<br />
* Put a webcam so to watch remotely. Doodle3d can be made into a webcam server or just use a simple wifi camera.<br />
<br />
See also http://wiki.ultimaker.com/Calibrate<br />
<br />
=== DONE: ===<br />
* [http://www.thingiverse.com/thing:25436 Locking key for Ultimaker filament feeder]<br />
* [http://www.thingiverse.com/thing:32044 curious llama belt tensioner]<br />
* [http://www.thingiverse.com/thing:32372 Ultimaker: Z-axis end-switch fine-adjuster, Switch mount (or some variation of that idea)]<br />
* [https://www.youtube.com/watch?v=LkkuDQO9OsU Ultimaker Z axis calibration]<br />
* [http://forum.ultimaker.com/viewtopic.php?t=161 Re-greased fan to reduce noise] (which wasn't very successful)<br />
* [http://www.thingiverse.com/thing:33286 Ulticontroller rotary dial]<br />
* [http://www.thingiverse.com/thing:40583 Ikea Dioder LED strip on Ultimaker]<br />
* Connect [http://www.doodle3d.com/ Doodle 3D] permanently to create a network printer or just [http://connect.doodle3d.com/ doodling] with your smartphone<br />
<br />
== Some links on the ''Spaweck'': ==<br />
* [https://shop.ultimaker.com/en/ultimaker-kit-new.html kit at 1214 EUR] + VAT + shipping<br />
* [http://davedurant.wordpress.com/2011/10/12/ultimaker-faq-but-what-about-the-quality-of-prints/ Ultimaker FAQ: but what about the quality of prints]<br />
* [http://wiki.ultimaker.com/Main_Page Ultimaker Wiki] with [http://wiki.ultimaker.com/Ultimaker_specs_and_features specs and features] and a [http://wiki.ultimaker.com/Frequently_asked_Questions FAQ]<br />
* [http://reprap.org/wiki/Ultimaker Reprap wiki on the Ultimaker]<br />
* [http://wiki.meta-concepts.com/display/UM/Home This is the home of my modified Ultimaker 3D Printer]<br />
* [http://wiki.ultimaker.com/No_strings_attached No strings attached]<br />
* [http://techwall.net/analyzing-your-first-print Analyzing your first print]<br />
* [https://wiki.raumzeitlabor.de/wiki/Ultimaker Raumzeitlabor's Ultimaker]<br />
<br />
== Paint gallery: ==<br />
* [http://umforum.ultimaker.com/index.php?/gallery/album/7-my-ultimaker/ Cool blue paint job]<br />
* [http://instagram.com/p/TYwjVQn7Fo/ Cool black paint job]</div>Stereo//wiki.syn2cat.lu/wiki/Movie_NightMovie Night2015-04-01T12:05:19Z<p>Stereo: Recurring events not really supported, should be created manually. Otherwise calendar users get a big event stretching for years...</p>
<hr />
<div>{{Event<br />
|attendees=<br />
|eventtype=Event<br />
|subtitle=watch a movie<br />
|description=every 2 saturdays, we'll use our chill area to watch a movie together on our nice projection screen.<br />
|contact=Tezza, Gunstick,<br />
|organizer=syn2cat<br />
|recurring=bi-weekly<br />
|from=2015/03/14 19:00<br />
|till=2015/03/14 23:00<br />
|location=Level2<br />
|logo=<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}<br />
We'll order food at around 7pm, socialize, decide on a movie and start this one at 8pm<br />
Popcorn is welcome 😉</div>Stereo//wiki.syn2cat.lu/wiki/Level2Level22014-09-03T19:52:16Z<p>Stereo: </p>
<hr />
<div>{{Location<br />
|address=87 route de Thionville<br />
|city=Luxembourg<br />
|country=Luxembourg<br />
|type=Hackerspace<br />
|picture=<br />
|website=http://www.hackerspace.lu/<br />
|email=info@hackerspace.lu<br />
|phonenumber=<br />
|coordinates=49.5916, 6.1407<br />
}}</div>Stereo//wiki.syn2cat.lu/wiki/Form:EventForm:Event2014-09-03T19:51:12Z<p>Stereo: </p>
<hr />
<div><noinclude><br />
This is the 'Event' form.<br />
<br />
It can be used for '''Events, Workshops, Conferences, Camps, Seminars, Meetings, Parties, and so on...'''.<br />
<br />
To add a page with this form, enter the page name below;<br />
if a page with that name already exists, you will be sent to a form to edit that page.<br />
<br />
{{#forminput:Event}}<br />
</noinclude><includeonly><br />
{{{info|add title=Add an Event|edit title=Edit an Event}}}<br />
{{{for template|Event}}}<br />
''Please READ the information contained in the tool-tips (click on a question mark).''<br />
<br />
<div style="float:right; border:1px solid #aaaaaa; width:45%; padding:5px;"><br />
{| class="formtable"<br />
|-<br />
! style="font-size:140%; padding-bottom:10px;" | Are you attending?<br />
|-<br />
| If you're attending this event, please add yourself here. {{#info: Do not use this to specify your target group. Do so in the description }}<br />
|-<br />
| {{{field|attendees|values from namespace=User|size=50}}} <br />
|}<br />
</div><!--<br />
<br />
--><div style="float:left; width:51%; border:1px solid #aaaaaa; margin-bottom:20px; padding:5px;"><br />
{| class="formtable"<br />
|-<br />
! style="font-size:140%; padding-bottom:10px;" | Mandatory information<br />
|-<br />
! Type of Event: {{#info:Be more specific, what type of event is it exactly?}}<br />
| {{{field|eventtype|default=Event|mandatory}}}<br />
|-<br />
! Subtitle (max. 80 chars): {{#info:This will appear on the front-page, next to your event's title.}}<br />
| {{{field|subtitle|input type=text|maxlength=80|size=38|mandatory}}}<br />
|-<br />
! Description (max. 500 chars): {{#info: This will appear in the main (left) section of your page. This must be set to be able to announce this event globally, so you should be quite detailed here. }}<br />
| style="padding-right:10px;" | {{{field|description|input type=textarea|maxlength=500|rows=5|cols=43}}}<br />
|-<br />
! Contact Person: {{#info:Whom can people contact for questions?}}<br />
| {{{field|contact|values from namespace=User|mandatory|size=38|depth=1}}}<br />
|-<br />
! Organizer: {{#info: Pick an organisation, or if it doesn't exist, <!-- {{#forminput:form=Organisation|button text=add it|query string=namespace=Organisation|autocomplete on namespace=Organisation|popup}} --> }}<br />
| {{{field|organizer|default=syn2cat|autocomplete on namespace=Organisation|mandatory|size=38}}}<br />
|-<br />
! Recurring: {{#info: Does this very event recur? (Monthly, Weekly, ...). ''Please note that recurring events will currently not be displayed on all lists and calendars.'' }}<br />
| {{{field|recurring|default=no|mandatory}}}<br />
|-<br />
! Starts on: {{#info: If you set the ''recurring'' field to any other value than ''no'', you need to set a timespan here into which the above period fits at least once. }}<br />
| {{{field|from|input type=datetimepicker|mandatory|week start=1}}}<br />
|-<br />
! Ends on:<br />
| {{{field|till|input type=datetimepicker|mandatory|week start=1}}}<br />
|-<br />
! Location: {{#info: Please pick a location from the list on the left. If your location isn't in the list yet, {{#forminput:form=Location|button text=add it|autocomplete on category=Location|popup}} }}<br />
| {{{field|location|input type=combobox|values from category=Location|default=Level2|mandatory}}} <br />
|}<br />
</div><!--<br />
<br />
--><div style="clear:both; width:51%; border:1px solid #aaaaaa; padding:5px;" ><br />
{| class="formtable"<br />
|-<br />
! style="font-size:140%; padding-bottom:10px;" | Optional information<br />
|-<br />
! Logo: {{#info: If you don't set your own picture, the default will be used. In order for our events to appear in the '''City Agenda''' or '''Agendalux''' publications, they need to have an image with '''at least 1150px''' in width or height. You can upload one here if you have one. Give only the name, without namespace. I.e. Picture.jpg, not File:Picture.jpg }}<br />
| {{{field|logo|autocomplete on namespace=File|uploadable}}}<br />
|-<br />
! Alternate Picture: {{#info: An alternate picture to be uploaded to external agendas. Remember that either width or height need to be larger than 1000px for it to appear in a printed publication. }}<br />
| {{{field|alternate_picture|autocomplete on namespace=File|uploadable}}}<br />
|-<br />
! Announce globally? {{#info: Should we announce this event on external calendars and on twitter? Setting this to "yes" requires a complete description and subtitle. '''QoS''': If you set this to "yes", pay utmost attention that your event description is detailed and accurate. '''Don't set to "yes" unless your date is fixed!''' }}<br />
| {{{field|announce|property=Do Announce|input type=radiobutton|default=no|mandatory}}} <br />
|-<br />
! Cost: {{#info: Takes values like '''0 EUR''', '''0 €''' or '''12 USD''' }}<br />
| style="padding-right:20px;" | {{{field|cost|default=0 EUR}}}<br />
|-<br />
! Mandatory registration: {{#info: Is registration mandatory for this event? }}<br />
| style="padding-right:20px;" | {{{field|reg|input type=radiobutton|default=f|property=Has mandatory registration}}}<br />
|-<br />
! Ticket URL: {{#info: Give a direct URL to a ticketing system, if available. }}<br />
| style="padding-right:20px;" | {{{field|ticket_url|property=Has ticket url|size=35}}}<br />
|-<br />
! Website:<br />
| {{{field|url|input type=text}}}<br />
|-<br />
! Is it a U19 event: {{#info: Is this an event for youth? }}<br />
| {{{field|u19|input type=radiobutton|property=Is U19|default=no|mandatory}}} <br />
|-<br />
! Extra Information: {{#info: Any extra information to be displayed on the '''frontpage''' on the day this event takes place? }}<br />
| {{{field|extrainfo}}}<br />
|-<br />
! Keywords: {{#info: Add keywords separated by commas so this event can be matched to other events and projects. }}<br />
| {{{field|keywords|size=35}}}<br />
<br />
|}<br />
</div><br />
<br />
{{{end template}}}<br />
<br />
'''Free text:'''<br />
<br />
{{{standard input|free text}}}<br />
<br />
<br />
{{{standard input|summary}}}<br />
<br />
{{{standard input|minor edit}}} {{{standard input|watch}}}<br />
<br />
{{{standard input|save}}} {{{standard input|preview}}} {{{standard input|changes}}} {{{standard input|cancel}}}<br />
</includeonly></div>Stereo//wiki.syn2cat.lu/wiki/Form:EventForm:Event2014-09-03T19:50:18Z<p>Stereo: </p>
<hr />
<div><noinclude><br />
This is the 'Event' form.<br />
<br />
It can be used for '''Events, Workshops, Conferences, Camps, Seminars, Meetings, Parties, and so on...'''.<br />
<br />
To add a page with this form, enter the page name below;<br />
if a page with that name already exists, you will be sent to a form to edit that page.<br />
<br />
{{#forminput:Event}}<br />
</noinclude><includeonly><br />
{{{info|add title=Add an Event|edit title=Edit an Event}}}<br />
{{{for template|Event}}}<br />
''Please READ the information contained in the tool-tips (click on a question mark).''<br />
<br />
<div style="float:right; border:1px solid #aaaaaa; width:45%; padding:5px;"><br />
{| class="formtable"<br />
|-<br />
! style="font-size:140%; padding-bottom:10px;" | Are you attending?<br />
|-<br />
| If you're attending this event, please add yourself here. {{#info: Do not use this to specify your target group. Do so in the description }}<br />
|-<br />
| {{{field|attendees|values from namespace=User|size=50}}} <br />
|}<br />
</div><!--<br />
<br />
--><div style="float:left; width:51%; border:1px solid #aaaaaa; margin-bottom:20px; padding:5px;"><br />
{| class="formtable"<br />
|-<br />
! style="font-size:140%; padding-bottom:10px;" | Mandatory information<br />
|-<br />
! Type of Event: {{#info:Be more specific, what type of event is it exactly?}}<br />
| {{{field|eventtype|default=Event|mandatory}}}<br />
|-<br />
! Subtitle (max. 80 chars): {{#info:This will appear on the front-page, next to your event's title.}}<br />
| {{{field|subtitle|input type=text|maxlength=80|size=38|mandatory}}}<br />
|-<br />
! Description (max. 500 chars): {{#info: This will appear in the main (left) section of your page. This must be set to be able to announce this event globally, so you should be quite detailed here. }}<br />
| style="padding-right:10px;" | {{{field|description|input type=textarea|maxlength=500|rows=5|cols=43}}}<br />
|-<br />
! Contact Person: {{#info:Whom can people contact for questions?}}<br />
| {{{field|contact|values from namespace=User|mandatory|size=38|depth=1}}}<br />
|-<br />
! Organizer: {{#info: Pick an organisation, or if it doesn't exist, <!-- {{#forminput:form=Organisation|button text=add it|query string=namespace=Organisation|autocomplete on namespace=Organisation|popup}} --> }}<br />
| {{{field|organizer|default=syn2cat|autocomplete on namespace=Organisation|mandatory|size=38}}}<br />
|-<br />
! Recurring: {{#info: Does this very event recur? (Monthly, Weekly, ...). ''Please note that recurring events will currently not be displayed on all lists and calendars.'' }}<br />
| {{{field|recurring|default=no|mandatory}}}<br />
|-<br />
! Starts on: {{#info: If you set the ''recurring'' field to any other value than ''no'', you need to set a timespan here into which the above period fits at least once. }}<br />
| {{{field|from|input type=datetimepicker|mandatory|week start=1}}}<br />
|-<br />
! Ends on:<br />
| {{{field|till|input type=datetimepicker|mandatory|week start=1}}}<br />
|-<br />
! Location: {{#info: Please pick a location from the list on the left. If your location isn't in the list yet, <!-- {{#forminput:form=Location|button text=add it|autocomplete on category=Location|popup}} --> }}<br />
| {{{field|location|input type=combobox|values from category=Location|default=Level2|mandatory}}} <br />
|}<br />
</div><!--<br />
<br />
--><div style="clear:both; width:51%; border:1px solid #aaaaaa; padding:5px;" ><br />
{| class="formtable"<br />
|-<br />
! style="font-size:140%; padding-bottom:10px;" | Optional information<br />
|-<br />
! Logo: {{#info: If you don't set your own picture, the default will be used. In order for our events to appear in the '''City Agenda''' or '''Agendalux''' publications, they need to have an image with '''at least 1150px''' in width or height. You can upload one here if you have one. Give only the name, without namespace. I.e. Picture.jpg, not File:Picture.jpg }}<br />
| {{{field|logo|autocomplete on namespace=File|uploadable}}}<br />
|-<br />
! Alternate Picture: {{#info: An alternate picture to be uploaded to external agendas. Remember that either width or height need to be larger than 1000px for it to appear in a printed publication. }}<br />
| {{{field|alternate_picture|autocomplete on namespace=File|uploadable}}}<br />
|-<br />
! Announce globally? {{#info: Should we announce this event on external calendars and on twitter? Setting this to "yes" requires a complete description and subtitle. '''QoS''': If you set this to "yes", pay utmost attention that your event description is detailed and accurate. '''Don't set to "yes" unless your date is fixed!''' }}<br />
| {{{field|announce|property=Do Announce|input type=radiobutton|default=no|mandatory}}} <br />
|-<br />
! Cost: {{#info: Takes values like '''0 EUR''', '''0 €''' or '''12 USD''' }}<br />
| style="padding-right:20px;" | {{{field|cost|default=0 EUR}}}<br />
|-<br />
! Mandatory registration: {{#info: Is registration mandatory for this event? }}<br />
| style="padding-right:20px;" | {{{field|reg|input type=radiobutton|default=f|property=Has mandatory registration}}}<br />
|-<br />
! Ticket URL: {{#info: Give a direct URL to a ticketing system, if available. }}<br />
| style="padding-right:20px;" | {{{field|ticket_url|property=Has ticket url|size=35}}}<br />
|-<br />
! Website:<br />
| {{{field|url|input type=text}}}<br />
|-<br />
! Is it a U19 event: {{#info: Is this an event for youth? }}<br />
| {{{field|u19|input type=radiobutton|property=Is U19|default=no|mandatory}}} <br />
|-<br />
! Extra Information: {{#info: Any extra information to be displayed on the '''frontpage''' on the day this event takes place? }}<br />
| {{{field|extrainfo}}}<br />
|-<br />
! Keywords: {{#info: Add keywords separated by commas so this event can be matched to other events and projects. }}<br />
| {{{field|keywords|size=35}}}<br />
<br />
|}<br />
</div><br />
<br />
{{{end template}}}<br />
<br />
'''Free text:'''<br />
<br />
{{{standard input|free text}}}<br />
<br />
<br />
{{{standard input|summary}}}<br />
<br />
{{{standard input|minor edit}}} {{{standard input|watch}}}<br />
<br />
{{{standard input|save}}} {{{standard input|preview}}} {{{standard input|changes}}} {{{standard input|cancel}}}<br />
</includeonly></div>Stereo//wiki.syn2cat.lu/wiki/Template:EventTemplate:Event2014-09-03T19:49:13Z<p>Stereo: </p>
<hr />
<div><includeonly>{{#ifexpr:{{#time: U | {{{till|}}} }}<{{#time: U }}|<div style="border: 2px solid #007A20; padding: 0.5em 1em 0.3em 0.5em; color: #007A20; width:840px;">'''Note:''' this article is about a passed event.</div>|}} <!--<br />
--> {{#if:{{{description|}}}||{{#ifeq: {{{announce|}}}|yes|<div style="border: 2px solid #007A20; padding: 0.5em 1em 0.3em 0.5em; color: red; width:840px;">'''Warning:''' this event is set to '''announce globally''' but does not have a description. Thus the property has been set to "'''no'''".</div>|}} }}<br />
{| class="wikitable" cellpadding="2" cellspacing="0" <!--<br />
--> style="float: right; width: 300px; margin: 0 0 1em 1em; border: 2px solid #AAAAAA; background-color: #FFFFFF"<br />
|+ '''[[Form:Event|Add your Event]]'''<br />
|-<br />
! colspan="2" <!-- This is the header<br />
--> style="padding: 0.5em 0 0 0.5em; color: white; background-color: #AAAAAA" <!--<br />
Switch Icons on eventtype<br />
--> |<br />
{{#switch: {{{eventtype}}}<br />
| Workshop = [[Image:Workshop.png|link=|left|40px]]<br />
| Meeting = [[Image:Meeting.png|link=|left|40px]]<br />
| Party = [[Image:Party.png|link=|left|40px]]<br />
| Camp = [[Image:Camp.png|link=|left|40px]]<br />
| #default = [[Image:Event.png|link=|left|40px]]<br />
}}<div style="font-size: 150%;text-align:right;padding-right:3px;">{{#if:{{{what|}}}|{{{what}}}|{{PAGENAME}} }}</div><br />
<div style="font-size:110%;text-align:right;padding-right:3px;">[[Has subtitle::{{{subtitle|}}}]]</div><br />
|-<br />
| colspan="2" style="padding: 10px 0px; text-align:center;" |<!-- setting custom image if available-->[[File:{{#if: {{{logo|}}} |{{{logo}}}|Weareinnovative.png}}|240px|link=]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#EventType|Type of Event]]''': || [[Is Event of Type::{{{eventtype}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#From|From]]''': || [[StartDate::{{{from}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Till|Till]]''': || [[EndDate::{{{till}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Recurring|Recurring]]''': || [[Is Recurring::{{{recurring|}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Organizer|Organizer]]''': || {{#arraymap:{{{organizer|}}}|,|x|[[Has organizer::Organisation:x|x]]}}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Cost|Cost]]''': || [[Has cost::{{{cost|}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Registration|Mandatory registration]]''': || {{{reg|}}}<br />
{{#if: {{{ticket_url|}}} |<br />
{{-}}<br />
{{!}} style="padding: 0 7px;" {{!}} '''[[Template:Event#Ticket_URL|Tickets]]''': {{!!}} [[Has ticket url::{{{ticket_url|}}}|Buy a ticket!]]<br />
| }}<br />
{{#if: {{{url|}}} |<br />
{{-}}<br />
{{!}} style="padding: 0 7px;" {{!}} '''[[Template:Event#Website|Website]]''': {{!!}} {{#ifexpr: {{#len: {{{url}}} }} > 26 | [{{{url}}} {{#sub:{{{url}}}|0|25}}...] | {{{url|}}} }}<br />
| }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Attendees|Attendees]]''': || {{#arraymap:{{{attendees|}}}|,|x|[[Has attendee::User:x|x]]}}<br/><span style="font-weight:bold;text-decoration:underline;margin-left:6px;"><!--<br />
-->{{#ifanon: [[Special:UserLogin|Log-in to RSVP]] |<br />
{{#autoedit:form=Event<br />
|target={{FULLPAGENAME}}<br />
|link text=»Add me!«<br />
|query string=Event[attendees]={{#arraymap: <br />
{{#ask:[[{{FULLPAGENAME}}]]<br />
|?Has attendee<br />
|format=list<br />
|headers=hide<br />
|mainlabel=-<br />
|link=none<br />
}}<br />
|,|x|{{#sub:x|5|0}}<br />
}}, {{#username:}} | reload}}<br />
}}</span><br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Contact Person|Contact Person(s)]]''': || {{#arraymap:{{{contact|}}}|,|x|[[Has Contact::User:x|x]] ([[Special:EmailUser/x|mail]]) }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Keywords|Keywords]]''': || {{#arraymap:{{{keywords|}}}|,|x|[[Has keyword::x|x]] }}<br />
|-<br />
| colspan="2" style="padding: 0.5em; color: white; background-color: #AAAAAA" | <span style="font-size: 120%;">Location</span><br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Where|Where]]''': || [[Has location::{{{location|}}}]] ({{Address|{{#show: {{{location|}}} | ?Has address|link=none}}|{{#show: {{{location|}}} | ?Has city}}|{{#show: {{{location|}}}|?Has country}}}})<br />
|-<br />
| style="vertical-align:top; padding: 0 7px;" | '''[[Template:Event#Map|Map]]''': <br />
|<br />
{{#display_point:{{#show:{{{location|}}}|?Has coordinates}}~{{Address|{{#show:{{{location|}}}|?Has address}}|{{#show:{{{location|}}}|?Has city}}|{{#show:{{{location|}}}|?Has country}}}}~The event takes place here.;| layers=osm-mapnik, osm-cyclemap | service=openlayers<br />
|width=250<br />
|height=250<br />
|controls=pan,zoom,type<br />
}}<br />
|-<br />
| colspan="2" style="padding: 0.5em; color: white; background-color: #AAAAAA" | <span style="font-size: 120%;">Tools</span><br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#QrCode|QrCode]]''': || {{#qrcode:}}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#iCal|Add to your calendar]]''': || Download {{#show: {{PAGENAME}} | ?Has PageName | ?StartDate = start | ?EndDate = end | format=icalendar |icalendartitle=syn2cat-{{PAGENAME}} }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Alternate|Alternate picture]]''': || {{#if: {{{alternate_picture|}}} | [[Media:{{{alternate_picture|}}}|View]] | None }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Announce|Announce globally]]''': || [[Do Announce::{{#if: {{{description|}}} | {{{announce|}}} | no }}]]<br />
|}<br />
<!-- *** displaying the description in the main section now *** --><br />
{{#if: {{{description|}}} | <div style="font-size:120%;">''[[Has description::{{{description|}}}]]''</div> | }}<br />
<!-- *** Let's automate the semantic info *** --><br />
{{#ifeq: {{{u19|}}} | yes | [[Category:U19]] }}<br />
<!-- *** Set variables that are not displayed on the page *** --><br />
{{#set:<br />
Is U19={{{u19}}} <br />
| Has PageName={{FULLPAGENAME}}<br />
| Has coordinates={{#show: {{{location|}}} | ?Has coordinates|link=none}} <br />
| Has picture=File:{{{logo|}}} <br />
| Has alternate picture=File:{{{alternate_picture|}}}<br />
| Has extraInfo={{{extrainfo|}}}<br />
| Is External={{#ifeq: {{{location|}}} | Hackerspace, Strassen | no | yes }}<br />
| Has mandatory registration={{{req|}}}<br />
| Url={{{url|}}}<br />
}}<br />
<!-- Switch Category on eventtype --><br />
{{#switch: {{{eventtype}}}<br />
| Meeting = [[Category:Meeting]]<br />
| Workshop = [[Category:Workshop]]<br />
| Camp = [[Category:Camp]]<br />
| Conference = [[Category:Conference]]<br />
| Party = [[Category:Party]]<br />
| Event = [[Category:Event]]<br />
| #default = [[Category:Event]]<br />
}} <!-- End Switch Category --><br />
<!-- Only use the dates function on non-recurring events, else add to the RecurringEvent category --><br />
{{#ifeq: {{{recurring|}}} | no | {{#arraymap: {{#dates: | StartDate={{{from}}} | EndDate={{{till}}} }}|,|x|[[Has date::x| ]] | }} | [[Category:RecurringEvent]] }}<br />
<!-- Set recurring data using a switch --><br />
{{#if: {{{from|}}} |<br />
{{#switch: {{{recurring}}}<br />
| daily = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=day |period=1 }}<br />
| weekly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=week |period=1 }}<br />
| bi-weekly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=week |period=2 }}<br />
| monthly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=month |period=1 }}<br />
| dayofweekinmonth = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=dayofweekinmonth |period=1 }}<br />
| bi-monthly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=month |period=2 }}<br />
| yearly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=year |period=1 }}<br />
}}<br />
}}<br />
</includeonly><br />
<br />
<noinclude><br />
==Usage==<br />
Please use the '''[[Form:Event|event form]]''' to add your event. It will validate your input.<br/><br />
<!--<br />
<br/><br />
<pre><br />
{{Event<br />
| logo = <filename><br />
| what = <alternate name to pagename, optional><br />
| eventtype = <party, conference, camp, workshop, meeting><br />
| subtitle = <event subtitle><br />
| description= <event description><br />
| extrainfo = <information that will be displayed on the frontpage on the day this event takes place><br />
| from= <Datetime><br />
| till= <Datetime><br />
| organizer=<string> (If this is set to anything other than syn2cat, the event will be marked as external)<br />
| announce=<no,yes> (Whether an event is supposed to be announced on twitter, facebook and external agendas)<br />
| recurring = <no, daily, weekly, bi-weekly, monthly, dayofweekinmonth, bi-monthly, yearly><br />
| cost=0€<br />
| u19 = <yes/no><br />
| location=Level2<br />
| coordinates=<br />
| contact= <comma-delimited list of the organisers><br />
| attendees = <string> Everyone<br />
| url=http://www.website.com<br />
}}<br />
</pre><br />
--><br />
</noinclude></div>Stereo//wiki.syn2cat.lu/wiki/Template:MediumMapTemplate:MediumMap2014-09-03T19:37:16Z<p>Stereo: </p>
<hr />
<div><includeonly><br />
[[Has coordinates::{{{coordinates|}}}|]]<br />
{{#if:{{{coordinates|}}}|<br />
{{#display_point:<br />
{{{coordinates}}}<br />
| service=openlayers<br />
| zoom=9<br />
| height=400<br />
| width=400<br />
| controls=pan,zoom,type<br />
| title={{{title|}}}<br />
| label={{{label|}}}<br />
| layers=osm-mapnik, osm-cyclemap<br />
}}<br />
}}<br />
</includeonly><br />
<noinclude><br />
Use this template to include maps into your pages<br />
<pre><br />
{{MediumMap<br />
| coordinates = 50.85137811° N, 5.690781176° E<br />
| label = <give your marker a label> (optional)<br />
| title = <Describe where you're pointing at> (optional)<br />
}}<br />
</pre><br />
[http://www.mediawiki.org/wiki/Semantic_Maps#Usage SemanticMap Usage] & [http://www.mediawiki.org/wiki/Extension:Maps#Usage Maps usage]<br />
</noinclude></div>Stereo//wiki.syn2cat.lu/wiki/LocationLocation2014-09-03T19:36:28Z<p>Stereo: </p>
<hr />
<div>=Hackerspace in Luxembourg=<br />
We're now located on level 2 of an office building on one of the busy main roads of Luxembourg city. <br />
A lot of bus lines go directly from the nearby train station which is at walking distance.<br />
<br />
''From 30. September 2009 until 15. July 2014, syn<sub>2</sub>cat was located in Strassen, close to the "les Thermes" in the rue du cimetière.''<br />
<br />
== Address ==<br />
The space's current address is<br />
<br />
:level 2<br />
:87, route de Thionville<br />
:L-2611 Luxembourg<br />
:Luxembourg<br />
<br />
==Map==<br />
{{MediumMap<br />
| coordinates=49.6162° N, 6.071° E<br />
| coordinates=49.5917° N, 6.141° E<br />
| title = Hackerspace<br />
| label = This is where '''syn<sub>2</sub>cat''' is located!<br />
| zoom=16<br />
| layers=osm-mapnik, osm-cyclemap<br />
| service=openlayers<br />
}}<br />
<br />
== How to get there by public transport ==<br />
For more detailed information, check [http://www.mobiliteit.lu/ mobiliteit.lu]<br />
<br />
* Go by train to Gare Centrale<br />
* there take one of the many bus lines and get off stop Neufchateau <br />
** 16 towards Hesperange<br />
** 144 towards Peppange<br />
** 125 towards Izig <br />
** 192 towards Hassel <br />
** 194 towards Bettenbourg<br />
** and many more<br />
* or simply walk to the hackerspace (20 min)<br />
<br />
<!-- insert a plan with road path here --><br />
<br />
== What you find around ==<br />
The syn<sub>2</sub>cat hackerspace is in the middle of the quartier Bonnevoie in Luxembourg City. There is a good connection via bus, bicycle and train. Several restaurants and shops are nearby. <br />
<br />
<!-- See the map for all details:<br />
http://goo.gl/v2GdY<br />
--><br />
<br />
== Pictures ==<br />
<br />
More recent pictures on the [[Pictures]] page!</div>Stereo//wiki.syn2cat.lu/wiki/LocationLocation2014-09-03T19:35:32Z<p>Stereo: </p>
<hr />
<div>=Hackerspace in Luxembourg=<br />
We're now located on level 2 of an office building on one of the busy main roads of Luxembourg city. <br />
A lot of bus lines go directly from the nearby train station which is at walking distance.<br />
<br />
''From September 30, 2009 until July 2014, syn<sub>2</sub>cat was located in Strassen, close to the "les Thermes" in the rue du cimetière.''<br />
<br />
== Address ==<br />
The space's current address is<br />
<br />
:level 2<br />
:87, route de Thionville<br />
:L-2611 Luxembourg<br />
:Luxembourg<br />
<br />
==Map==<br />
{{MediumMap<br />
| coordinates=49.6162° N, 6.071° E<br />
| coordinates=49.5917° N, 6.141° E<br />
| title = Hackerspace<br />
| label = This is where '''syn<sub>2</sub>cat''' is located!<br />
| zoom=16<br />
| layers=osm-mapnik, osm-cyclemap<br />
| service=openlayers<br />
}}<br />
<br />
== How to get there by public transport ==<br />
For more detailed information, check [http://www.mobiliteit.lu/ mobiliteit.lu]<br />
<br />
* Go by train to Gare Centrale<br />
* there take one of the many bus lines and get off stop Neufchateau <br />
** 16 towards Hesperange<br />
** 144 towards Peppange<br />
** 125 towards Izig <br />
** 192 towards Hassel <br />
** 194 towards Bettenbourg<br />
** and many more<br />
* or simply walk to the hackerspace (20 min)<br />
<br />
<!-- insert a plan with road path here --><br />
<br />
== What you find around ==<br />
The syn<sub>2</sub>cat hackerspace is in the middle of the quartier Bonnevoie in Luxembourg City. There is a good connection via bus, bicycle and train. Several restaurants and shops are nearby. <br />
<br />
<!-- See the map for all details:<br />
http://goo.gl/v2GdY<br />
--><br />
<br />
== Pictures ==<br />
<br />
More recent pictures on the [[Pictures]] page!</div>Stereo//wiki.syn2cat.lu/wiki/Bootstrap_2014-09Bootstrap 2014-092014-09-03T19:31:10Z<p>Stereo: Edited automatically from page Bootstrap 2014-09.</p>
<hr />
<div>{{Event<br />
|attendees=, Stereo<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, sid, stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2014/09/20 19:00<br />
|till=2014/09/20 23:30<br />
|location=Level2<br />
|logo=Bootstraps.gif<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
* What's the difference between syn2cat, hackerspace and Level2 [[User:Thierry|Thierry]] ([[User talk:Thierry|talk]]) 14:38, 19 August 2014 (CEST)<br />
* What are the twitter accounts used for? syn2cat, lvl_2, haxogreen [[User:Thierry|Thierry]] ([[User talk:Thierry|talk]]) 14:38, 19 August 2014 (CEST)<br />
* On the sustainability of keeping information on source.hacker.lu, the redmine to github migration, what to store on github, and justification for the secrets the office should keep from other members. [[User:Stereo|Stereo]] ([[User talk:Stereo|talk]]) 20:50, 21 August 2014 (CEST)<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Stereo//wiki.syn2cat.lu/wiki/Template:EventTemplate:Event2014-09-03T19:26:33Z<p>Stereo: </p>
<hr />
<div><includeonly>{{#ifexpr:{{#time: U | {{{till|}}} }}<{{#time: U }}|<div style="border: 2px solid #007A20; padding: 0.5em 1em 0.3em 0.5em; color: #007A20; width:840px;">'''Note:''' this article is about a passed event.</div>|}} <!--<br />
--> {{#if:{{{description|}}}||{{#ifeq: {{{announce|}}}|yes|<div style="border: 2px solid #007A20; padding: 0.5em 1em 0.3em 0.5em; color: red; width:840px;">'''Warning:''' this event is set to '''announce globally''' but does not have a description. Thus the property has been set to "'''no'''".</div>|}} }}<br />
{| class="wikitable" cellpadding="2" cellspacing="0" <!--<br />
--> style="float: right; width: 300px; margin: 0 0 1em 1em; border: 2px solid #AAAAAA; background-color: #FFFFFF"<br />
|+ '''[[Form:Event|Add your Event]]'''<br />
|-<br />
! colspan="2" <!-- This is the header<br />
--> style="padding: 0.5em 0 0 0.5em; color: white; background-color: #AAAAAA" <!--<br />
Switch Icons on eventtype<br />
--> |<br />
{{#switch: {{{eventtype}}}<br />
| Workshop = [[Image:Workshop.png|link=|left|40px]]<br />
| Meeting = [[Image:Meeting.png|link=|left|40px]]<br />
| Party = [[Image:Party.png|link=|left|40px]]<br />
| Camp = [[Image:Camp.png|link=|left|40px]]<br />
| #default = [[Image:Event.png|link=|left|40px]]<br />
}}<div style="font-size: 150%;text-align:right;padding-right:3px;">{{#if:{{{what|}}}|{{{what}}}|{{PAGENAME}} }}</div><br />
<div style="font-size:110%;text-align:right;padding-right:3px;">[[Has subtitle::{{{subtitle|}}}]]</div><br />
|-<br />
| colspan="2" style="padding: 10px 0px; text-align:center;" |<!-- setting custom image if available-->[[File:{{#if: {{{logo|}}} |{{{logo}}}|Weareinnovative.png}}|240px|link=]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#EventType|Type of Event]]''': || [[Is Event of Type::{{{eventtype}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#From|From]]''': || [[StartDate::{{{from}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Till|Till]]''': || [[EndDate::{{{till}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Recurring|Recurring]]''': || [[Is Recurring::{{{recurring|}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Organizer|Organizer]]''': || {{#arraymap:{{{organizer|}}}|,|x|[[Has organizer::Organisation:x|x]]}}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Cost|Cost]]''': || [[Has cost::{{{cost|}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Registration|Mandatory registration]]''': || {{{reg|}}}<br />
{{#if: {{{ticket_url|}}} |<br />
{{-}}<br />
{{!}} style="padding: 0 7px;" {{!}} '''[[Template:Event#Ticket_URL|Tickets]]''': {{!!}} [[Has ticket url::{{{ticket_url|}}}|Buy a ticket!]]<br />
| }}<br />
{{#if: {{{url|}}} |<br />
{{-}}<br />
{{!}} style="padding: 0 7px;" {{!}} '''[[Template:Event#Website|Website]]''': {{!!}} {{#ifexpr: {{#len: {{{url}}} }} > 26 | [{{{url}}} {{#sub:{{{url}}}|0|25}}...] | {{{url|}}} }}<br />
| }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Attendees|Attendees]]''': || {{#arraymap:{{{attendees|}}}|,|x|[[Has attendee::User:x|x]]}}<br/><span style="font-weight:bold;text-decoration:underline;margin-left:6px;"><!--<br />
-->{{#ifanon: [[Special:UserLogin|Log-in to RSVP]] |<br />
{{#autoedit:form=Event<br />
|target={{FULLPAGENAME}}<br />
|link text=»Add me!«<br />
|query string=Event[attendees]={{#arraymap: <br />
{{#ask:[[{{FULLPAGENAME}}]]<br />
|?Has attendee<br />
|format=list<br />
|headers=hide<br />
|mainlabel=-<br />
|link=none<br />
}}<br />
|,|x|{{#sub:x|5|0}}<br />
}}, {{#username:}} | reload}}<br />
}}</span><br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Contact Person|Contact Person(s)]]''': || {{#arraymap:{{{contact|}}}|,|x|[[Has Contact::User:x|x]] ([[Special:EmailUser/x|mail]]) }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Keywords|Keywords]]''': || {{#arraymap:{{{keywords|}}}|,|x|[[Has keyword::x|x]] }}<br />
|-<br />
| colspan="2" style="padding: 0.5em; color: white; background-color: #AAAAAA" | <span style="font-size: 120%;">Location</span><br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Where|Where]]''': || [[Has location::{{{location|}}}]] ({{Address|{{#show: {{{location|}}} | ?Has address|link=none}}|{{#show: {{{location|}}} | ?Has city}}|{{#show: {{{location|}}}|?Has country}}}})<br />
|-<br />
| style="vertical-align:top; padding: 0 7px;" | '''[[Template:Event#Map|Map]]''': <br />
|<br />
{{#display_point:{{#show:{{{location|}}}|?Has coordinates}}~{{Address|{{#show:{{{location|}}}|?Has address}}|{{#show:{{{location|}}}|?Has city}}|{{#show:{{{location|}}}|?Has country}}}}~The event takes place here.;| layers=osm-mapnik, osm-cyclemap | service=openlayers<br />
|width=250<br />
|height=250<br />
|controls=pan,zoom,type<br />
}}<br />
|-<br />
| colspan="2" style="padding: 0.5em; color: white; background-color: #AAAAAA" | <span style="font-size: 120%;">Tools</span><br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#QrCode|QrCode]]''': || {{#qrcode:}}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#iCal|Add to your calendar]]''': || Download {{#show: {{PAGENAME}} | ?Has PageName | ?StartDate = start | ?EndDate = end | format=icalendar |icalendartitle=syn2cat-{{PAGENAME}} }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Alternate|Alternate picture]]''': || {{#if: {{{alternate_picture|}}} | [[Media:{{{alternate_picture|}}}|View]] | None }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Announce|Announce globally]]''': || [[Do Announce::{{#if: {{{description|}}} | {{{announce|}}} | no }}]]<br />
|}<br />
<!-- *** displaying the description in the main section now *** --><br />
{{#if: {{{description|}}} | <div style="font-size:120%;">''[[Has description::{{{description|}}}]]''</div> | }}<br />
<!-- *** Let's automate the semantic info *** --><br />
{{#ifeq: {{{u19|}}} | yes | [[Category:U19]] }}<br />
<!-- *** Set variables that are not displayed on the page *** --><br />
{{#set:<br />
Is U19={{{u19}}} <br />
| Has PageName={{FULLPAGENAME}}<br />
| Has coordinates={{#show: {{{location|}}} | ?Has coordinates|link=none}} <br />
| Has picture=File:{{{logo|}}} <br />
| Has alternate picture=File:{{{alternate_picture|}}}<br />
| Has extraInfo={{{extrainfo|}}}<br />
| Is External={{#ifeq: {{{location|}}} | Hackerspace, Strassen | no | yes }}<br />
| Has mandatory registration={{{req|}}}<br />
| Url={{{url|}}}<br />
}}<br />
<!-- Switch Category on eventtype --><br />
{{#switch: {{{eventtype}}}<br />
| Meeting = [[Category:Meeting]]<br />
| Workshop = [[Category:Workshop]]<br />
| Camp = [[Category:Camp]]<br />
| Conference = [[Category:Conference]]<br />
| Party = [[Category:Party]]<br />
| Event = [[Category:Event]]<br />
| #default = [[Category:Event]]<br />
}} <!-- End Switch Category --><br />
<!-- Only use the dates function on non-recurring events, else add to the RecurringEvent category --><br />
{{#ifeq: {{{recurring|}}} | no | {{#arraymap: {{#dates: | StartDate={{{from}}} | EndDate={{{till}}} }}|,|x|[[Has date::x| ]] | }} | [[Category:RecurringEvent]] }}<br />
<!-- Set recurring data using a switch --><br />
{{#if: {{{from|}}} |<br />
{{#switch: {{{recurring}}}<br />
| daily = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=day |period=1 }}<br />
| weekly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=week |period=1 }}<br />
| bi-weekly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=week |period=2 }}<br />
| monthly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=month |period=1 }}<br />
| dayofweekinmonth = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=dayofweekinmonth |period=1 }}<br />
| bi-monthly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=month |period=2 }}<br />
| yearly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=year |period=1 }}<br />
}}<br />
}}<br />
</includeonly><br />
<br />
<noinclude><br />
==Usage==<br />
Please use the '''[[Form:Event|event form]]''' to add your event. It will validate your input.<br/><br />
<!--<br />
<br/><br />
<pre><br />
{{Event<br />
| logo = <filename><br />
| what = <alternate name to pagename, optional><br />
| eventtype = <party, conference, camp, workshop, meeting><br />
| subtitle = <event subtitle><br />
| description= <event description><br />
| extrainfo = <information that will be displayed on the frontpage on the day this event takes place><br />
| from= <Datetime><br />
| till= <Datetime><br />
| organizer=<string> (If this is set to anything other than syn2cat, the event will be marked as external)<br />
| announce=<no,yes> (Whether an event is supposed to be announced on twitter, facebook and external agendas)<br />
| recurring = <no, daily, weekly, bi-weekly, monthly, dayofweekinmonth, bi-monthly, yearly><br />
| cost=0€<br />
| u19 = <yes/no><br />
| location=Hackerspace, Strassen<br />
| contact= <comma-delimited list of the organisers><br />
| attendees = <string> Everyone<br />
| url=http://www.website.com<br />
}}<br />
</pre><br />
--><br />
</noinclude></div>Stereo//wiki.syn2cat.lu/wiki/Template:EventTemplate:Event2014-09-03T19:18:33Z<p>Stereo: </p>
<hr />
<div><includeonly>{{#ifexpr:{{#time: U | {{{till|}}} }}<{{#time: U }}|<div style="border: 2px solid #007A20; padding: 0.5em 1em 0.3em 0.5em; color: #007A20; width:840px;">'''Note:''' this article is about a passed event.</div>|}} <!--<br />
--> {{#if:{{{description|}}}||{{#ifeq: {{{announce|}}}|yes|<div style="border: 2px solid #007A20; padding: 0.5em 1em 0.3em 0.5em; color: red; width:840px;">'''Warning:''' this event is set to '''announce globally''' but does not have a description. Thus the property has been set to "'''no'''".</div>|}} }}<br />
{| class="wikitable" cellpadding="2" cellspacing="0" <!--<br />
--> style="float: right; width: 300px; margin: 0 0 1em 1em; border: 2px solid #AAAAAA; background-color: #FFFFFF"<br />
|+ '''[[Form:Event|Add your Event]]'''<br />
|-<br />
! colspan="2" <!-- This is the header<br />
--> style="padding: 0.5em 0 0 0.5em; color: white; background-color: #AAAAAA" <!--<br />
Switch Icons on eventtype<br />
--> |<br />
{{#switch: {{{eventtype}}}<br />
| Workshop = [[Image:Workshop.png|link=|left|40px]]<br />
| Meeting = [[Image:Meeting.png|link=|left|40px]]<br />
| Party = [[Image:Party.png|link=|left|40px]]<br />
| Camp = [[Image:Camp.png|link=|left|40px]]<br />
| #default = [[Image:Event.png|link=|left|40px]]<br />
}}<div style="font-size: 150%;text-align:right;padding-right:3px;">{{#if:{{{what|}}}|{{{what}}}|{{PAGENAME}} }}</div><br />
<div style="font-size:110%;text-align:right;padding-right:3px;">[[Has subtitle::{{{subtitle|}}}]]</div><br />
|-<br />
| colspan="2" style="padding: 10px 0px; text-align:center;" |<!-- setting custom image if available-->[[File:{{#if: {{{logo|}}} |{{{logo}}}|Weareinnovative.png}}|240px|link=]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#EventType|Type of Event]]''': || [[Is Event of Type::{{{eventtype}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#From|From]]''': || [[StartDate::{{{from}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Till|Till]]''': || [[EndDate::{{{till}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Recurring|Recurring]]''': || [[Is Recurring::{{{recurring|}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Organizer|Organizer]]''': || {{#arraymap:{{{organizer|}}}|,|x|[[Has organizer::Organisation:x|x]]}}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Cost|Cost]]''': || [[Has cost::{{{cost|}}}]]<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Registration|Mandatory registration]]''': || {{{reg|}}}<br />
{{#if: {{{ticket_url|}}} |<br />
{{-}}<br />
{{!}} style="padding: 0 7px;" {{!}} '''[[Template:Event#Ticket_URL|Tickets]]''': {{!!}} [[Has ticket url::{{{ticket_url|}}}|Buy a ticket!]]<br />
| }}<br />
{{#if: {{{url|}}} |<br />
{{-}}<br />
{{!}} style="padding: 0 7px;" {{!}} '''[[Template:Event#Website|Website]]''': {{!!}} {{#ifexpr: {{#len: {{{url}}} }} > 26 | [{{{url}}} {{#sub:{{{url}}}|0|25}}...] | {{{url|}}} }}<br />
| }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Attendees|Attendees]]''': || {{#arraymap:{{{attendees|}}}|,|x|[[Has attendee::User:x|x]]}}<br/><span style="font-weight:bold;text-decoration:underline;margin-left:6px;"><!--<br />
-->{{#ifanon: [[Special:UserLogin|Log-in to RSVP]] |<br />
{{#autoedit:form=Event<br />
|target={{FULLPAGENAME}}<br />
|link text=»Add me!«<br />
|query string=Event[attendees]={{#arraymap: <br />
{{#ask:[[{{FULLPAGENAME}}]]<br />
|?Has attendee<br />
|format=list<br />
|headers=hide<br />
|mainlabel=-<br />
|link=none<br />
}}<br />
|,|x|{{#sub:x|5|0}}<br />
}}, {{#username:}} | reload}}<br />
}}</span><br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Contact Person|Contact Person(s)]]''': || {{#arraymap:{{{contact|}}}|,|x|[[Has Contact::User:x|x]] ([[Special:EmailUser/x|mail]]) }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Keywords|Keywords]]''': || {{#arraymap:{{{keywords|}}}|,|x|[[Has keyword::x|x]] }}<br />
|-<br />
| colspan="2" style="padding: 0.5em; color: white; background-color: #AAAAAA" | <span style="font-size: 120%;">Location</span><br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Where|Where]]''': || [[Has location::{{{location|}}}]] ({{Address|{{#show: {{{location|}}} | ?Has address|link=none}}|{{#show: {{{location|}}} | ?Has city}}|{{#show: {{{location|}}}|?Has country}}}})<br />
|-<br />
| style="vertical-align:top; padding: 0 7px;" | '''[[Template:Event#Map|Map]]''': <br />
|<br />
{{#display_point:{{#show:{{{location|}}}|?Has coordinates}}~{{Address|{{#show:{{{location|}}}|?Has address}}|{{#show:{{{location|}}}|?Has city}}|{{#show:{{{location|}}}|?Has country}}}}~The event takes place here.;| layers=osm-mapnik, osm-cyclemap, bing-hybrid | service=openlayers<br />
|width=250<br />
|height=250<br />
|controls=pan,zoom,type<br />
}}<br />
|-<br />
| colspan="2" style="padding: 0.5em; color: white; background-color: #AAAAAA" | <span style="font-size: 120%;">Tools</span><br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#QrCode|QrCode]]''': || {{#qrcode:}}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#iCal|Add to your calendar]]''': || Download {{#show: {{PAGENAME}} | ?Has PageName | ?StartDate = start | ?EndDate = end | format=icalendar |icalendartitle=syn2cat-{{PAGENAME}} }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Alternate|Alternate picture]]''': || {{#if: {{{alternate_picture|}}} | [[Media:{{{alternate_picture|}}}|View]] | None }}<br />
|-<br />
| style="padding: 0 7px;" | '''[[Template:Event#Announce|Announce globally]]''': || [[Do Announce::{{#if: {{{description|}}} | {{{announce|}}} | no }}]]<br />
|}<br />
<!-- *** displaying the description in the main section now *** --><br />
{{#if: {{{description|}}} | <div style="font-size:120%;">''[[Has description::{{{description|}}}]]''</div> | }}<br />
<!-- *** Let's automate the semantic info *** --><br />
{{#ifeq: {{{u19|}}} | yes | [[Category:U19]] }}<br />
<!-- *** Set variables that are not displayed on the page *** --><br />
{{#set:<br />
Is U19={{{u19}}} <br />
| Has PageName={{FULLPAGENAME}}<br />
| Has coordinates={{#show: {{{location|}}} | ?Has coordinates|link=none}} <br />
| Has picture=File:{{{logo|}}} <br />
| Has alternate picture=File:{{{alternate_picture|}}}<br />
| Has extraInfo={{{extrainfo|}}}<br />
| Is External={{#ifeq: {{{location|}}} | Hackerspace, Strassen | no | yes }}<br />
| Has mandatory registration={{{req|}}}<br />
| Url={{{url|}}}<br />
}}<br />
<!-- Switch Category on eventtype --><br />
{{#switch: {{{eventtype}}}<br />
| Meeting = [[Category:Meeting]]<br />
| Workshop = [[Category:Workshop]]<br />
| Camp = [[Category:Camp]]<br />
| Conference = [[Category:Conference]]<br />
| Party = [[Category:Party]]<br />
| Event = [[Category:Event]]<br />
| #default = [[Category:Event]]<br />
}} <!-- End Switch Category --><br />
<!-- Only use the dates function on non-recurring events, else add to the RecurringEvent category --><br />
{{#ifeq: {{{recurring|}}} | no | {{#arraymap: {{#dates: | StartDate={{{from}}} | EndDate={{{till}}} }}|,|x|[[Has date::x| ]] | }} | [[Category:RecurringEvent]] }}<br />
<!-- Set recurring data using a switch --><br />
{{#if: {{{from|}}} |<br />
{{#switch: {{{recurring}}}<br />
| daily = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=day |period=1 }}<br />
| weekly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=week |period=1 }}<br />
| bi-weekly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=week |period=2 }}<br />
| monthly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=month |period=1 }}<br />
| dayofweekinmonth = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=dayofweekinmonth |period=1 }}<br />
| bi-monthly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=month |period=2 }}<br />
| yearly = {{#set_recurring_event: property=Has date |start={{{from}}} | end={{{till}}} |unit=year |period=1 }}<br />
}}<br />
}}<br />
</includeonly><br />
<br />
<noinclude><br />
==Usage==<br />
Please use the '''[[Form:Event|event form]]''' to add your event. It will validate your input.<br/><br />
<!--<br />
<br/><br />
<pre><br />
{{Event<br />
| logo = <filename><br />
| what = <alternate name to pagename, optional><br />
| eventtype = <party, conference, camp, workshop, meeting><br />
| subtitle = <event subtitle><br />
| description= <event description><br />
| extrainfo = <information that will be displayed on the frontpage on the day this event takes place><br />
| from= <Datetime><br />
| till= <Datetime><br />
| organizer=<string> (If this is set to anything other than syn2cat, the event will be marked as external)<br />
| announce=<no,yes> (Whether an event is supposed to be announced on twitter, facebook and external agendas)<br />
| recurring = <no, daily, weekly, bi-weekly, monthly, dayofweekinmonth, bi-monthly, yearly><br />
| cost=0€<br />
| u19 = <yes/no><br />
| location=Hackerspace, Strassen<br />
| contact= <comma-delimited list of the organisers><br />
| attendees = <string> Everyone<br />
| url=http://www.website.com<br />
}}<br />
</pre><br />
--><br />
</noinclude></div>Stereo//wiki.syn2cat.lu/wiki/OpenMondaysOpenMondays2014-09-03T18:39:39Z<p>Stereo: </p>
<hr />
<div>{{Event<br />
|attendees=<br />
|eventtype=Event<br />
|subtitle=visit Level2 hackerspace every monday<br />
|description=The Level2 hackerspace is open every monday evening to anyone who wants to have a look and ask questions.<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=weekly<br />
|from=2014/08/04 20:00<br />
|till=2014/08/04 23:00<br />
|location=Level2<br />
|logo=<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}</div>Stereo//wiki.syn2cat.lu/wiki/Bootstrap_2014-09Bootstrap 2014-092014-09-03T18:26:54Z<p>Stereo: </p>
<hr />
<div>{{Event<br />
|attendees=<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, sid, stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2014/09/20 19:00<br />
|till=2014/09/20 23:30<br />
|location=Level2<br />
|logo=Bootstraps.gif<br />
|alternate_picture=<br />
|announce=no<br />
|cost=0 EUR<br />
|reg=<br />
|ticket_url=<br />
|url=<br />
|u19=no<br />
|extrainfo=<br />
|keywords=<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
* What's the difference between syn2cat, hackerspace and Level2 [[User:Thierry|Thierry]] ([[User talk:Thierry|talk]]) 14:38, 19 August 2014 (CEST)<br />
* What are the twitter accounts used for? syn2cat, lvl_2, haxogreen [[User:Thierry|Thierry]] ([[User talk:Thierry|talk]]) 14:38, 19 August 2014 (CEST)<br />
* On the sustainability of keeping information on source.hacker.lu, the redmine to github migration, what to store on github, and justification for the secrets the office should keep from other members. [[User:Stereo|Stereo]] ([[User talk:Stereo|talk]]) 20:50, 21 August 2014 (CEST)<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Stereo//wiki.syn2cat.lu/wiki/Bootstrap_2014-09Bootstrap 2014-092014-08-21T18:50:18Z<p>Stereo: /* Topics */</p>
<hr />
<div>{{Event<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, sid, stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2014/09/20 19:00<br />
|till=2014/09/20 23:30<br />
|location=Level2<br />
|logo=Bootstraps.gif<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
* What's the difference between syn2cat, hackerspace and Level2 [[User:Thierry|Thierry]] ([[User talk:Thierry|talk]]) 14:38, 19 August 2014 (CEST)<br />
* What are the twitter accounts used for? syn2cat, lvl_2, haxogreen [[User:Thierry|Thierry]] ([[User talk:Thierry|talk]]) 14:38, 19 August 2014 (CEST)<br />
* On the sustainability of keeping information on source.hacker.lu, the redmine to github migration, what to store on github, and justification for the secrets the office should keep from other members. [[User:Stereo|Stereo]] ([[User talk:Stereo|talk]]) 20:50, 21 August 2014 (CEST)<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Stereo//wiki.syn2cat.lu/wiki/Bootstrap_2014-09Bootstrap 2014-092014-08-21T18:49:37Z<p>Stereo: </p>
<hr />
<div>{{Event<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, sid, stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2014/09/20 19:00<br />
|till=2014/09/20 23:30<br />
|location=Level2<br />
|logo=Bootstraps.gif<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
* What's the difference between syn2cat, hackerspace and Level2 [[User:Thierry|Thierry]] ([[User talk:Thierry|talk]]) 14:38, 19 August 2014 (CEST)<br />
* What are the twitter accounts used for? syn2cat, lvl_2, haxogreen [[User:Thierry|Thierry]] ([[User talk:Thierry|talk]]) 14:38, 19 August 2014 (CEST)<br />
* On the sustainability of keeping information on source.hacker.lu, the redmine to github migration, what to store on github, and justification for the secrets the office should keep from other members.<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Stereo//wiki.syn2cat.lu/wiki/Bootstrap_2014-06Bootstrap 2014-062014-06-10T11:08:01Z<p>Stereo: /* Topics */</p>
<hr />
<div>{{Event<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, sid, Stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2014/06/21 19:00<br />
|till=2014/06/21 23:30<br />
|location=Hackerspace, Strassen<br />
|logo=Bootstraps.gif<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
<br />
# State of the search for a new space -- [[User:Stereo|Stereo]] ([[User talk:Stereo|talk]]) 13:08, 10 June 2014 (CEST)<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Stereo//wiki.syn2cat.lu/wiki/Bootstrap_2014-06Bootstrap 2014-062014-06-10T11:07:42Z<p>Stereo: /* Topics */</p>
<hr />
<div>{{Event<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, sid, Stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2014/06/21 19:00<br />
|till=2014/06/21 23:30<br />
|location=Hackerspace, Strassen<br />
|logo=Bootstraps.gif<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''If midnight before meeting, the topics is empty, there will be no meeting. Sorry'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
<br />
# State of the search for a new space<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Stereo//wiki.syn2cat.lu/wiki/Chr%C3%ABschtmaart_2013Chrëschtmaart 20132013-11-25T22:14:49Z<p>Stereo: map, details, my participation</p>
<hr />
<div>{{Event<br />
|attendees=, Gunstick<br />
|eventtype=Event<br />
|subtitle=the yearly hacker presence ath the christmas market<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/12/13<br />
|till=2013/12/14<br />
|location=Commune Strassen<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
This year we sell:<br />
<br />
* glowpins, to build yourself or prebuilt. Also testing if people want RGB rainbow glowpins.<br />
* and club mate or mate tee, with rhum<br />
* 3D printed christmas decorations/keychains (ask Guillaume if you'd like to help)<br />
<br />
Our booth is the first one you see when getting to the market. So we better make a good impression (i.e. lots of blinkenlights)<br />
<br />
Here's a map http://umap.openstreetmap.fr/en/map/untitled-map_2994#20/49.61891/6.07213 , only with our booth as I don't have the layout by hand right now.<br />
<br />
Plan to wear the warmest clothes you have, it's usually very cold, especially the feet.<br />
<br />
Please enter your name to commit yourself for one of those tasks. Also click the "add me!" link in the attendee box.<br />
<br />
Thursday is buildup and decoration of the booth.<br />
<br />
There are two columns for saturday for those who just want to help get all the material back to the space (and put everything at the right spot!).<br />
<br />
{|class="wikitable"<br />
|Name<br />
|Th 12: 19h-21h<br />
|Fr 13: 17h-20h<br />
|Sa 14: 17h-20h<br />
|Sa 14: 20h-end<br />
|-<br />
|Gunstick<br />
|OK<br />
|OK<br />
|OK<br />
|OK<br />
|-<br />
|sid<br />
|OK<br />
|tbc<br />
|OK<br />
|OK<br />
|-<br />
|Guillaume<br />
|OK<br />
|OK<br />
|OK<br />
|OK<br />
|-<br />
|<name><br />
|<Th><br />
|<Fr><br />
|<Sa><br />
|<Sa+><br />
|}</div>Stereo//wiki.syn2cat.lu/wiki/Bootstrap_2013-11Bootstrap 2013-112013-11-15T18:33:54Z<p>Stereo: PLA, HOT</p>
<hr />
<div>{{Event<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, Nick17, NPU, sid, Stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/11/16 19:00<br />
|till=2013/11/16 23:30<br />
|location=Hackerspace, Strassen<br />
|logo=Bootstraps.gif<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
* science festival conclusion [[User:Gunstick|Gunstick]] ([[User talk:Gunstick|talk]]) 15:32, 15 November 2013 (CET)<br />
* replace that ugly projection screen [[User:Gunstick|Gunstick]] ([[User talk:Gunstick|talk]]) 15:32, 15 November 2013 (CET)<br />
* cool items to buy: your ideas<br />
* prepare christmas market [[User:Gunstick|Gunstick]] ([[User talk:Gunstick|talk]]) 15:32, 15 November 2013 (CET)<br />
* prepare 30C3 [[User:Gunstick|Gunstick]] ([[User talk:Gunstick|talk]]) 15:32, 15 November 2013 (CET)<br />
* Ultimaker plastics (which colour should our 3D printed bikeshed be?) [[User:Stereo|Stereo]] ([[User talk:Stereo|talk]]) 19:33, 15 November 2013 (CET)<br />
<br />
==PYP (present your project)==<br />
* drag upgraded marble adder to researchers night [[User:Gunstick|Gunstick]] ([[User talk:Gunstick|talk]]) 15:38, 15 November 2013 (CET)<br />
* install projection screen [[User:Gunstick|Gunstick]] ([[User talk:Gunstick|talk]]) 15:38, 15 November 2013 (CET)<br />
* build a real computer museum [[User:Gunstick|Gunstick]] ([[User talk:Gunstick|talk]]) 15:38, 15 November 2013 (CET)<br />
* Humanitarian OpenStreetMap Team efforts for Typhoon Haiyan in the Phillippines [[User:Stereo|Stereo]] ([[User talk:Stereo|talk]]) 19:33, 15 November 2013 (CET)<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Stereo//wiki.syn2cat.lu/wiki/UltimakerUltimaker2013-08-08T22:38:31Z<p>Stereo: /* Some links on the Spaweck: */ Raumzeitlabor</p>
<hr />
<div>== Usage ==<br />
[[File:Ultimaker-syn2cat.jpg|320px|right]]<br />
=== How to print things ===<br />
* Download or create something. That's coming as an STL file<br />
* power on the ultimaker (switch on, plug in usb)<br />
* Start the cura software<br />
* load object<br />
* click "prepare print"<br />
* click "print"<br />
<br />
Interesting changes in the "full settings" mode<br />
* fill density: to make really light objects or really heavy and stable ones.<br />
* print speed: current trial which works is 80<br />
* printing temperature: 210 is still fine<br />
* raft: only if you have a very narrow but tall object<br />
* skirt: sometimes one round is not enough, so put 2<br />
<br />
* expert menu<br />
** fan speed min: 20<br />
** bridge speed: 150 (can help to get overhang more straight)<br />
** retrace on jumps only: if print is not nice but contains lots of jumps, try to disable this<br />
** enable hop: this can help but slows priting down a lottle<br />
<br />
=== When working with the Ultimaker, pay attention to the following things: ===<br />
* When printing small objects and objects with a very small base, ''don't print on a raft'', especially for PLA. Rafts are just a waste of plastic with a well-calibrated Z axis. Gunstick's Raft Exception™ is narrow but tall objects that can easily be kicked over; a raft can make them more stable. Newer Cura versions even have an experimental option to avoid kicking the object by moving the platform down.<br />
* Be careful not to lower or raise the bed by bumping into it. The Z axis has been carefully calibrated. Verify that there is no space between the screws and the top of the bed. But don't turn the screws!<br />
* Clean the head and bed with isopropyl alcohol before you start. If you want to be extra nice, clean the bed when you're done.<br />
* If the extrusion head doesn't heat, flick the switch next to the USB port. If you hear the ventilation, then it's on!<br />
* After preparing the print, press "Print" in the main window (the one with the 3D Model) and wait for the second Cura window to pop up. If you can't see it, look for it. Check that the Windows is called after the file you want to print. When printing several files in a row, always be sure to close the second smaller Cura window before printing the next item or you will print the first item again (check window title).<br />
* Sometimes the plastic won't stick to the surface. Cancel the print and use the controller (little box hanging on the machine) to return the extrusion head to "Auto Home". To do this, navigate (using push and scroll on the wheel) into the Menu->Prepare->Auto Home. To make it work, the plastic has to stick to the surface before it makes the skirt outline, or it will only start to stick at a random moment before or during the skirt, with a high risk of leaving a small drop of extra plastic. Try cleaning the bed with alcohol. If that fails, try helping the plastic filament down on the bed when the head initially lowers, or re-taping the bed. But this probably means the Z axis is de-calibrated. You can also change the parameter to do 2 or 3 skirt outlines.<br />
*Don't forget to take the object off the platform before printing the next one. Doh! In case you do forget, the emergency off is the power switch.<br />
*Put scrap plastic into the container glass. Maybe one day it will be possible to recycle.<br />
<br />
=== Does it cost something? ===<br />
You can configure the printing cost directly into Cura. After prepare print, the approximate weight and length of plastic is calculated and there you can then see the cost. To configure:<br />
* File -> Preferences<br />
* price/kg: 50<br />
* price/m: 0.5<br />
You don't need to pay if the print is only for some cents. Just when getting into massive amounts (some euros) it would be cool to donate a bit. There is a piggybank (Sparschwein) at the soldering table.<br />
<br />
=== how to on linux ===<br />
It is preferable to have your own setup on your own machine, or maybe on a dedicated account on a syn2cat computer. So you can have your own settings and don't need to fiddle around with the cura profiles which then get messed up by the next user.<br />
==== sketchup ====<br />
Only working on intel/amd as it's a windows program. If you have windows, just use windows!<br />
(I know there is 3D software for linux, but I'm lost in how to use that)<br />
* apt-get install wine<br />
* download sketchup http://www.sketchup.com/intl/en/download/gsu.html<br />
* wine sketchupwen.exe<br />
* run it: wine '~/.wine/drive_C/Program Files (x86)/Google/Sketchup/Sketchup.exe'<br />
* consult this http://wiki.winehq.org/GoogleSketchup (you need probably that registry: "wine regedit")<br />
* add module for STL export http://www.guitar-list.com/download-software/convert-sketchup-skp-files-dxf-or-stl chose the *rbz file)<br />
* draw object in millimeters<br />
* export in millimeters<br />
<br />
==== Cura ====<br />
* instructions http://wiki.ultimaker.com/Cura<br />
* it's kinda working http://wiki.ultimaker.com/Installing_Cura_on_Linux (you need to do that pypy thing if you're 64 bit)<br />
* If you are unable to print (clicking on the print button does not manifest a window), you can prepare print and write your gcode file to the SD card<br />
* To make the print button work, set this environment<br />
<pre><br />
export PYTHONPATH="$PYTHONPATH":/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/<br />
</pre><br />
<br />
==== printing from SD card ====<br />
* switch ultimaker on<br />
* unplug the USB cable !!! (else it will not print)<br />
* navigate to card menu<br />
* select file<br />
* printer heats up, and prints the object<br />
<br />
== Tasks ==<br />
<br />
=== TODO (more or less in that order): ===<br />
* [http://www.thingiverse.com/thing:40041 Spring-loaded NEMA 17 steppers / belt tensioner]<br />
* [http://www.thingiverse.com/thing:25950 Ulti-Foot]<br />
* [http://www.thingiverse.com/thing:29469 Handle]<br />
* [http://www.thingiverse.com/thing:21184 Printhead cover]<br />
* [http://www.thingiverse.com/thing:25436 Locking key for Ultimaker filament feeder]<br />
* [http://www.thingiverse.com/thing:40583 Ikea Dioder LED strip on Ultimaker]<br />
* Collection of [http://www.thingiverse.com/thing:39973 tools]<br />
* Some kind of [http://www.thingiverse.com/thing:18098 Tool thing] or awesome [http://www.thingiverse.com/thing:41661 laser-cut Ultimaker Tool Holder]<br />
* [http://www.thingiverse.com/thing:22719 UltiController Clamp]<br />
* [https://www.youtube.com/watch?v=v8f_mmFUyug Get PLA to stick to your Printrbot build platform with Hairspray or ABS juice]<br />
<br />
See also http://wiki.ultimaker.com/Calibrate<br />
<br />
=== DONE: ===<br />
* [http://www.thingiverse.com/thing:32044 curious llama belt tensioner]<br />
* [http://www.thingiverse.com/thing:32372 Ultimaker: Z-axis end-switch fine-adjuster, Switch mount (or some variation of that idea)]<br />
* [https://www.youtube.com/watch?v=LkkuDQO9OsU Ultimaker Z axis calibration]<br />
* [http://forum.ultimaker.com/viewtopic.php?t=161 Re-greased fan to reduce noise] (which wasn't very successful)<br />
* [http://www.thingiverse.com/thing:33286 Ulticontroller rotary dial]<br />
<br />
== Some links on the ''Spaweck'': ==<br />
* [https://shop.ultimaker.com/en/ultimaker-kit-new.html kit at 1214 EUR] + VAT + shipping<br />
* [http://davedurant.wordpress.com/2011/10/12/ultimaker-faq-but-what-about-the-quality-of-prints/ Ultimaker FAQ: but what about the quality of prints]<br />
* [http://wiki.ultimaker.com/Main_Page Ultimaker Wiki] with [http://wiki.ultimaker.com/Ultimaker_specs_and_features specs and features] and a [http://wiki.ultimaker.com/Frequently_asked_Questions FAQ]<br />
* [http://reprap.org/wiki/Ultimaker Reprap wiki on the Ultimaker]<br />
* [http://wiki.meta-concepts.com/display/UM/Home This is the home of my modified Ultimaker 3D Printer]<br />
* [http://wiki.ultimaker.com/No_strings_attached No strings attached]<br />
* [http://techwall.net/analyzing-your-first-print Analyzing your first print]<br />
* [https://wiki.raumzeitlabor.de/wiki/Ultimaker Raumzeitlabor's Ultimaker]<br />
<br />
== Paint gallery: ==<br />
* [http://umforum.ultimaker.com/index.php?/gallery/album/7-my-ultimaker/ Cool blue paint job]<br />
* [http://instagram.com/p/TYwjVQn7Fo/ Cool black paint job]</div>Stereo//wiki.syn2cat.lu/wiki/SyndiSyndi2013-07-16T17:52:16Z<p>Stereo: </p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=syndi.hackerspace.lu.<br />
|ehostname=syndi.hackerspace.lu.<br />
|ip=94.242.208.140<br />
|type=server<br />
|brand=?<br />
|model=?<br />
|operatingsystem=debian GNU/Linux<br />
|services=?<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=syndi<br />
|os=debian 7.0<br />
}}<br />
<br />
Main ldap server for spacenet (main Luxembourg node)<br />
<br />
Nginx for python web servers, behind an Apache proxy. Python servers are: votex, mematool<br />
<br />
Dovecot<br />
<br />
Postfix<br />
<br />
Behind Apache: Roundcube webmail, main site, redmine, syn2stock (dead), votex, mediawiki<br />
<br />
MySQL</div>Stereo//wiki.syn2cat.lu/wiki/TleilaxTleilax2013-07-16T17:32:58Z<p>Stereo: </p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=tleilax.hackerspace.lu.<br />
|ehostname=tleilax.hackerspace.lu.<br />
|ip=85.93.218.197<br />
|type=server<br />
|brand=dell<br />
|model=?<br />
|operatingsystem=debian GNU/Linux<br />
|services=?<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=tleilax<br />
|os=debian 7.0<br />
}}<br />
<br />
== Synopsis ==<br />
The name's "lusitania" and the purpose is: '''none'''<br />
<br />
Previously: pentabarf (dead), <br />
<br />
Ipsec for ldap sync to lusi; mysql for pentabarf etc., dev wiki,</div>Stereo//wiki.syn2cat.lu/wiki/SyndiSyndi2013-07-16T17:32:47Z<p>Stereo: </p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=syndi.hackerspace.lu.<br />
|ehostname=syndi.hackerspace.lu.<br />
|ip=94.242.208.140<br />
|type=server<br />
|brand=?<br />
|model=?<br />
|operatingsystem=debian GNU/Linux<br />
|services=?<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=syndi<br />
|os=debian 7.0<br />
}}<br />
<br />
Main ldap server for spacenet (main Luxembourg node)<br />
Nginx for python web servers, behind an Apache proxy. Python servers are: votex, mematool</div>Stereo//wiki.syn2cat.lu/wiki/SyndiSyndi2013-07-16T17:31:33Z<p>Stereo: Created page with "Category:Network {{Computer |hostname=none |ehostname=syndi.hackerspace.lu. |ip=94.242.208.140 |type=server |brand=? |model=? |operatingsystem=debian GNU/Linux |services=?..."</p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=none<br />
|ehostname=syndi.hackerspace.lu.<br />
|ip=94.242.208.140<br />
|type=server<br />
|brand=?<br />
|model=?<br />
|operatingsystem=debian GNU/Linux<br />
|services=?<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=syndi<br />
|os=debian 7.0<br />
}}<br />
<br />
Main ldap server for spacenet (main Luxembourg node)<br />
Nginx for python web servers, behind an Apache proxy. Python servers are: votex, mematool</div>Stereo//wiki.syn2cat.lu/wiki/TleilaxTleilax2013-07-16T17:31:30Z<p>Stereo: </p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=none<br />
|ehostname=tleilax.hackerspace.lu.<br />
|ip=85.93.218.197<br />
|type=server<br />
|brand=dell<br />
|model=?<br />
|operatingsystem=debian GNU/Linux<br />
|services=?<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=tleilax<br />
|os=debian 7.0<br />
}}<br />
<br />
== Synopsis ==<br />
The name's "lusitania" and the purpose is: '''none'''<br />
<br />
Previously: pentabarf (dead), <br />
<br />
Ipsec for ldap sync to lusi; mysql for pentabarf etc., dev wiki,</div>Stereo//wiki.syn2cat.lu/wiki/TleilaxTleilax2013-07-16T17:22:22Z<p>Stereo: Created page with "Category:Network {{Computer |hostname=none |ehostname=tleilax.hackerspace.lu. |ip=85.93.218.197 |type=server |brand=dell |model=? |operatingsystem=debian GNU/Linux |servic..."</p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=none<br />
|ehostname=tleilax.hackerspace.lu.<br />
|ip=85.93.218.197<br />
|type=server<br />
|brand=dell<br />
|model=?<br />
|operatingsystem=debian GNU/Linux<br />
|services=?<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=tleilax<br />
|os=debian 7.0<br />
}}<br />
<br />
== Synopsis ==<br />
The name's "lusitania" and the purpose is: '''none'''</div>Stereo//wiki.syn2cat.lu/wiki/LusitaniaLusitania2013-05-21T16:01:42Z<p>Stereo: /* Services */</p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=lusitania.lan<br />
|ehostname=lusitania.int.hackerspace.lu<br />
|ip=192.168.1.24<br />
|type=server<br />
|brand=custom<br />
|model=custom<br />
|operatingsystem=debian GNU/Linux<br />
|services=apache2,mysqld,icinga,cifs,nfs,dns,...<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=lusitania<br />
|os=debian 7.0<br />
}}<br />
== Synopsis ==<br />
The name's "lusitania" and the purpose is: '''main server at the hackerspace'''<br />
<br />
External access through lusitania.int.hackerspace.lu (ipv4 and ipv6)<br />
<br />
It has become a part of our main space infrastructure, hosting a fileserver, functioning as WiFi access-point, hosting a freeradius server and more.<br />
<br />
== Services ==<br />
<br />
=== Network ===<br />
<br />
* DHCP for LAN<br />
* v6 announcement for LAN<br />
* IPSec tunnel (in use?)<br />
* squid (in use?)<br />
* pppoe connection to the internet<br />
* aiccu (ipv6 tunnel to sixxs)<br />
* OpenVPN (in use? Looks like we only use it for ccc events.)<br />
* Muling's bwmon for the meter in the rack<br />
<br />
=== Access ===<br />
<br />
* Update the status from Openduino to space.syn2cat.lu<br />
* slapd (openldap) for Openduino and the radius for the wifi<br />
* Freeradius (for the wifi)<br />
<br />
=== Systems ===<br />
<br />
* UPS monitoring<br />
* Munin<br />
* Munin-node<br />
* cacti (in use?)<br />
* Smartd<br />
* postfix (in use for anything other than system emails?)<br />
* NTPD<br />
<br />
=== Misc ===<br />
* tftpd (in use? /var/lib/tftpboot/ files are from 2011.)<br />
* MySQL (in use?)<br />
* samba (in use?)<br />
* libvirtd (in use?)<br />
* rpc.idmapd (in use?)<br />
* nscd (in use?)<br />
* portmap (in use?)<br />
* NFSD (in use?)<br />
* NMBD (in use?)<br />
<br />
== Fileserver ==<br />
=== Windows share ===<br />
The server may be access from Windows clients and other clients using the smb/cifs protocol.<br />
The server can be located by browsing the net or simply using "\\lusitania.lan"<br />
<br />
=== NFS ===<br />
NFSv3 and NFSv4 may be used for accessing the file server<br />
==== NFSv3 ====<br />
<pre><br />
mount -t nfs lusitania.lan:/work /mnt/target<br />
</pre><br />
<br />
==== NFSv4 ====<br />
<pre><br />
mount -t nfs4 lusitania.lan:/ /mnt/target<br />
</pre><br />
<br />
<br />
== Music server ==<br />
You may access the music server using a webbrowser at this address: [http://lusitania.lan/ampache http://lusitania.lan/ampache] <br><br />
The login is '''admin / admin''', feel free to create yourself an account !<br><br />
Ampache may be used to stream music to any '''mpd''' server on the LAN.<br />
<br />
== Cruft ==<br />
<br />
An unsustainable number of packages is installed on lusitania. Most of those are probably useless.<br />
<br />
<code><br />
root@lusitania:~# aptitude search '~i!~M!?essential' | wc -l<br />
317<br />
</code></div>Stereo//wiki.syn2cat.lu/wiki/LusitaniaLusitania2013-05-21T14:41:36Z<p>Stereo: /* Services */</p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=lusitania.lan<br />
|ehostname=lusitania.int.hackerspace.lu<br />
|ip=192.168.1.24<br />
|type=server<br />
|brand=custom<br />
|model=custom<br />
|operatingsystem=debian GNU/Linux<br />
|services=apache2,mysqld,icinga,cifs,nfs,dns,...<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=lusitania<br />
|os=debian 7.0<br />
}}<br />
== Synopsis ==<br />
The name's "lusitania" and the purpose is: '''main server at the hackerspace'''<br />
<br />
External access through lusitania.int.hackerspace.lu (ipv4 and ipv6)<br />
<br />
It has become a part of our main space infrastructure, hosting a fileserver, functioning as WiFi access-point, hosting a freeradius server and more.<br />
<br />
== Services ==<br />
<br />
* DHCP for LAN<br />
* v6 announcement for LAN<br />
* UPS monitoring<br />
* Update the status from Openduino to space.syn2cat.lu<br />
* Munin<br />
* IPSec tunnel<br />
* tftpd (in use?)<br />
* cacti (in use?)<br />
* MySQL (in use?)<br />
* squid (in use?)<br />
* samba (in use?)<br />
* slapd (openldap)<br />
* pppoe connection to the internet<br />
* libvirtd (in use?)<br />
* rpc.idmapd (in use?)<br />
* nscd (in use?)<br />
* portmap (in use?)<br />
* postfix (in use?)<br />
* aiccu (ipv6 tunnel to sixxs)<br />
* OpenVPN (in use?)<br />
* Munin-node<br />
* Smartd<br />
* NFSD (in use?)<br />
* NMBD (in use?)<br />
* Freeradius (for the wifi)<br />
* Muling's bwmon for the meter in the rack<br />
* NTPD<br />
<br />
== Fileserver ==<br />
=== Windows share ===<br />
The server may be access from Windows clients and other clients using the smb/cifs protocol.<br />
The server can be located by browsing the net or simply using "\\lusitania.lan"<br />
<br />
=== NFS ===<br />
NFSv3 and NFSv4 may be used for accessing the file server<br />
==== NFSv3 ====<br />
<pre><br />
mount -t nfs lusitania.lan:/work /mnt/target<br />
</pre><br />
<br />
==== NFSv4 ====<br />
<pre><br />
mount -t nfs4 lusitania.lan:/ /mnt/target<br />
</pre><br />
<br />
<br />
== Music server ==<br />
You may access the music server using a webbrowser at this address: [http://lusitania.lan/ampache http://lusitania.lan/ampache] <br><br />
The login is '''admin / admin''', feel free to create yourself an account !<br><br />
Ampache may be used to stream music to any '''mpd''' server on the LAN.<br />
<br />
== Cruft ==<br />
<br />
An unsustainable number of packages is installed on lusitania. Most of those are probably useless.<br />
<br />
<code><br />
root@lusitania:~# aptitude search '~i!~M!?essential' | wc -l<br />
317<br />
</code></div>Stereo//wiki.syn2cat.lu/wiki/LusitaniaLusitania2013-05-21T03:19:53Z<p>Stereo: </p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=lusitania.lan<br />
|ehostname=lusitania.int.hackerspace.lu<br />
|ip=192.168.1.24<br />
|type=server<br />
|brand=custom<br />
|model=custom<br />
|operatingsystem=debian GNU/Linux<br />
|services=apache2,mysqld,icinga,cifs,nfs,dns,...<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=lusitania<br />
|os=debian 7.0<br />
}}<br />
== Synopsis ==<br />
The name's "lusitania" and the purpose is: '''main server at the hackerspace'''<br />
<br />
External access through lusitania.int.hackerspace.lu (ipv4 and ipv6)<br />
<br />
It has become a part of our main space infrastructure, hosting a fileserver, functioning as WiFi access-point, hosting a freeradius server and more.<br />
<br />
== Services ==<br />
<br />
* DHCP for LAN<br />
* v6 announcement for LAN<br />
* UPS monitoring<br />
* Update the status from Openduino to space.syn2cat.lu<br />
* Munin<br />
* IPSec tunnel<br />
* tftpd (in use?)<br />
* cacti (in use?)<br />
* MySQL (in use?)<br />
* squid (in use?)<br />
* samba (in use?)<br />
* slapd (openldap)<br />
* pppoe connection to the internet<br />
* libvirtd (in use?)<br />
* rpc.idmapd (in use?)<br />
* nscd (in use?)<br />
* portmap (in use?)<br />
* postfix (in use?)<br />
* aiccu (ipv6 tunnel to sixxs)<br />
* OpenVPN (in use?)<br />
* Munin-node<br />
* Smartd<br />
* NFSD (in use?)<br />
* NMBD (in use?)<br />
* Freeradius (in use?)<br />
* Muling's bwmon for the meter in the rack<br />
* NTPD<br />
<br />
== Fileserver ==<br />
=== Windows share ===<br />
The server may be access from Windows clients and other clients using the smb/cifs protocol.<br />
The server can be located by browsing the net or simply using "\\lusitania.lan"<br />
<br />
=== NFS ===<br />
NFSv3 and NFSv4 may be used for accessing the file server<br />
==== NFSv3 ====<br />
<pre><br />
mount -t nfs lusitania.lan:/work /mnt/target<br />
</pre><br />
<br />
==== NFSv4 ====<br />
<pre><br />
mount -t nfs4 lusitania.lan:/ /mnt/target<br />
</pre><br />
<br />
<br />
== Music server ==<br />
You may access the music server using a webbrowser at this address: [http://lusitania.lan/ampache http://lusitania.lan/ampache] <br><br />
The login is '''admin / admin''', feel free to create yourself an account !<br><br />
Ampache may be used to stream music to any '''mpd''' server on the LAN.<br />
<br />
== Cruft ==<br />
<br />
An unsustainable number of packages is installed on lusitania. Most of those are probably useless.<br />
<br />
<code><br />
root@lusitania:~# aptitude search '~i!~M!?essential' | wc -l<br />
317<br />
</code></div>Stereo//wiki.syn2cat.lu/wiki/LusitaniaLusitania2013-05-21T03:15:43Z<p>Stereo: </p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=lusitania.lan<br />
|ehostname=lusitania.int.hackerspace.lu<br />
|ip=192.168.1.24<br />
|type=server<br />
|brand=custom<br />
|model=custom<br />
|operatingsystem=debian GNU/Linux<br />
|services=apache2,mysqld,icinga,cifs,nfs,dns,...<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=lusitania<br />
|os=debian 7.0<br />
}}<br />
== Synopsis ==<br />
The name's "lusitania" and the purpose is: '''main server at the hackerspace'''<br />
<br />
External access through lusitania.int.hackerspace.lu (ipv4 and ipv6)<br />
<br />
It has become a part of our main space infrastructure, hosting a fileserver, functioning as WiFi access-point, hosting a freeradius server and more.<br />
<br />
== Services ==<br />
<br />
* DHCP for LAN<br />
* v6 announcement for LAN<br />
* UPS monitoring<br />
* Update the status from Openduino to space.syn2cat.lu<br />
* Munin<br />
* IPSec tunnel<br />
* tftpd (in use?)<br />
* cacti (in use?)<br />
* MySQL (in use?)<br />
* squid (in use?)<br />
* samba (in use?)<br />
* slapd (openldap)<br />
* pppoe connection to the internet<br />
* libvirtd (in use?)<br />
* rpc.idmapd (in use?)<br />
* nscd (in use?)<br />
* portmap (in use?)<br />
* postfix (in use?)<br />
* aiccu (ipv6 tunnel to sixxs)<br />
* OpenVPN (in use?)<br />
* Munin-node<br />
* Smartd<br />
* NFSD (in use?)<br />
* NMBD (in use?)<br />
* Freeradius (in use?)<br />
* Muling's bwmon for the meter in the rack<br />
* NTPD<br />
<br />
== Fileserver ==<br />
=== Windows share ===<br />
The server may be access from Windows clients and other clients using the smb/cifs protocol.<br />
The server can be located by browsing the net or simply using "\\lusitania.lan"<br />
<br />
=== NFS ===<br />
NFSv3 and NFSv4 may be used for accessing the file server<br />
==== NFSv3 ====<br />
<pre><br />
mount -t nfs lusitania.lan:/work /mnt/target<br />
</pre><br />
<br />
==== NFSv4 ====<br />
<pre><br />
mount -t nfs4 lusitania.lan:/ /mnt/target<br />
</pre><br />
<br />
<br />
== Music server ==<br />
You may access the music server using a webbrowser at this address: [http://lusitania.lan/ampache http://lusitania.lan/ampache] <br><br />
The login is '''admin / admin''', feel free to create yourself an account !<br><br />
Ampache may be used to stream music to any '''mpd''' server on the LAN.<br />
<br />
== Cruft ==<br />
<br />
Many packages are installed on lusitania. Most of those are probably useless.<br />
<br />
===List of installed non-essential packages that have no other packages depending on them:===<br />
<code><br />
i 3ware-cli-binary - Command Line Interface for 3Ware Controllers<br />
i acl - Access control list utilities<br />
i acpi-support-base - scripts for handling base ACPI events such as the power butto<br />
i acpid - Advanced Configuration and Power Interface event daemon<br />
i adduser - add and remove users and groups<br />
i aiccu - SixXS Automatic IPv6 Connectivity Client Utility<br />
i ampache-themes - Themes for Ampache<br />
i apcupsd - APC UPS Power Management (daemon)<br />
i apt-dater-host - host helper application for apt-dater<br />
i apt-utils - package managment related utility programs<br />
i apticron - Simple tool to mail about pending package updates<br />
i aptitude - terminal-based package manager<br />
i aptitude-common - architecture indepedent files for the aptitude package manage<br />
i at - Delayed job execution and batch processing<br />
i avahi-daemon - Avahi mDNS/DNS-SD daemon<br />
i bash-completion - programmable completion for the bash shell<br />
i bc - The GNU bc arbitrary precision calculator language<br />
i bind9 - Internet Domain Name Server<br />
i bind9-host - Version of 'host' bundled with BIND 9.X<br />
i bmon - portable bandwidth monitor and rate estimator<br />
i bridge-utils - Utilities for configuring the Linux Ethernet bridge<br />
i bsd-mailx - simple mail user agent<br />
i bsdmainutils - collection of more utilities from FreeBSD<br />
i build-essential - Informational list of build-essential packages<br />
i busybox - Tiny utilities for small and embedded systems<br />
i bwm-ng - small and simple console-based bandwidth monitor<br />
i cacti - web interface for graphing of monitoring systems<br />
i colord - system service to manage device colour profiles -- system dae<br />
i colordiff - tool to colorize 'diff' output<br />
i conntrack - Program to modify the conntrack tables<br />
i console-common - basic infrastructure for text console configuration<br />
i console-data - keymaps, fonts, charset maps, fallback tables for console-too<br />
i console-setup - console font and keymap setup program<br />
i console-setup-linux - Linux specific part of console-setup<br />
i consolekit - framework for defining and tracking users, sessions and seats<br />
i cpio - GNU cpio -- a program to manage archives of files<br />
i cron - process scheduling daemon<br />
i cryptsetup - disk encryption support - startup scripts<br />
i cryptsetup-bin - disk encryption support - command line tools<br />
i cups - Common UNIX Printing System(tm) - server<br />
i cups-filters - OpenPrinting CUPS Filters<br />
i dc - The GNU dc arbitrary precision reverse-polish calculator<br />
i ddclient - address updating utility for dynamic DNS services<br />
i debian-archive-keyring - GnuPG archive keys of the Debian archive<br />
i debian-faq - Debian FAQ<br />
i debian-keyring - GnuPG keys of Debian Developers<br />
i debootstrap - Bootstrap a basic Debian system<br />
i denyhosts - Utility to help sys admins thwart SSH crackers<br />
i dictionaries-common - Common utilities for spelling dictionary tools<br />
i dmidecode - SMBIOS/DMI table decoder<br />
i dnsmasq-base - Small caching DNS proxy and DHCP/TFTP server<br />
i dnsutils - Clients provided with BIND<br />
i doc-debian - Debian Project documentation and other documents<br />
i dos2unix - convert text file line endings between CRLF and LF<br />
i dsniff - Various tools to sniff network traffic for cleartext insecuri<br />
i ed - classic UNIX line editor<br />
i eject - ejects CDs and operates CD-Changers under Linux<br />
i etckeeper - store /etc in git, mercurial, bzr or darcs<br />
i etherwake - A little tool to send magic Wake-on-LAN packets<br />
i ethstatus - console-based ethernet statistics monitor<br />
i ethtool - display or change Ethernet device settings<br />
i fdupes - identifies duplicate files within given directories<br />
i file - Determines file type using "magic" numbers<br />
i firmware-linux - Binary firmware for various drivers in the Linux kernel (meta<br />
i firmware-linux-nonfree - Binary firmware for various drivers in the Linux kernel<br />
i fonts-droid - handheld device font with extensive style and language suppor<br />
i fonts-freefont-ttf - Freefont Serif, Sans and Mono Truetype fonts<br />
i fonts-liberation - Fonts with the same metrics as Times, Arial and Courier<br />
i freeradius-common - FreeRADIUS common files<br />
i freeradius-utils - FreeRADIUS client utilities<br />
i ftp - classical file transfer client<br />
i gdisk - GPT fdisk text-mode partitioning tool<br />
i gettext-base - GNU Internationalization utilities for the base system<br />
i gir1.2-glib-2.0 - Introspection data for GLib, GObject, Gio and GModule<br />
i git-core - fast, scalable, distributed revision control system (obsolete<br />
i git-man - fast, scalable, distributed revision control system (manual p<br />
i gnupg - GNU privacy guard - a free PGP replacement<br />
i gnuplot - Command-line driven interactive plotting program<br />
i gnuplot-nox - Command-line driven interactive plotting program. No-X packag<br />
i gnutls-bin - GNU TLS library - commandline utilities<br />
i gpgv - GNU privacy guard - signature verification tool<br />
i groff - GNU troff text-formatting system<br />
i groff-base - GNU troff text-formatting system (base system components)<br />
i grub-common - GRand Unified Bootloader (common files)<br />
i grub-pc - GRand Unified Bootloader, version 2 (PC/BIOS version)<br />
i grub-pc-bin - GRand Unified Bootloader, version 2 (PC/BIOS binaries)<br />
i grub2-common - GRand Unified Bootloader (common files for version 2)<br />
i hdparm - tune hard disk parameters for high performance<br />
i hplip - HP Linux Printing and Imaging System (HPLIP)<br />
i hplip-data - HP Linux Printing and Imaging - data files<br />
i htop - interactive processes viewer<br />
i iamerican - American English dictionary for ispell (standard version)<br />
i ibritish - British English dictionary for ispell (standard version)<br />
i ienglish-common - Common files for British and American ispell dictionaries<br />
i ifenslave-2.6 - Attach and detach slave interfaces to a bonding device<br />
i iftop - displays bandwidth usage information on an network interface<br />
i ifupdown - high level tools to configure network interfaces<br />
i imagemagick - image manipulation programs<br />
i imagemagick-common - image manipulation programs -- infrastructure<br />
i imvirt-helper - helper programs to detect several virtualizations<br />
i info - Standalone GNU Info documentation browser<br />
i initramfs-tools - generic modular initramfs generator<br />
i installation-report - system installation report<br />
i iodbc - GTK+ config frontend for the iODBC Driver Manager<br />
i iproute - networking and traffic control tools<br />
i ipset - administration tool for kernel IP sets<br />
i iptables - administration tools for packet filtering and NAT<br />
i iptraf - Interactive Colorful IP LAN Monitor<br />
i iptstate - top-like interface to your netfilter connection-tracking tabl<br />
i iputils-ping - Tools to test the reachability of network hosts<br />
i ipxe-qemu - PXE boot firmware - ROM images for qemu<br />
i isc-dhcp-server - ISC DHCP server for automatic IP address assignment<br />
i ispell - International Ispell (an interactive spelling corrector)<br />
i john - active password cracking tool<br />
i john-data - active password cracking tool - character sets<br />
i kbd - Linux console font and keytable utilities<br />
i kernel-package - A utility for building Linux kernel related Debian packages.<br />
i keyboard-configuration - system-wide keyboard preferences<br />
i keyutils - Linux Key Management Utilities<br />
i kmod - tools for managing Linux kernel modules<br />
i krb5-locales - Internationalization support for MIT Kerberos<br />
i laptop-detect - attempt to detect a laptop<br />
i ldap-utils - OpenLDAP utilities<br />
i less - pager program similar to more<br />
i libgphoto2-l10n - gphoto2 digital camera library - localized messages<br />
i libjs-jquery - JavaScript library for dynamic web applications<br />
i libjs-yui - Yahoo User Interface Library<br />
i liblinear-tools - Standalone applications for LIBLINEAR<br />
i liblockfile-bin - support binaries for and cli utilities based on liblockfile<br />
i libnss-ldap - NSS module for using LDAP as a naming service<br />
i libnss-mdns - NSS module for Multicast DNS name resolution<br />
i libnss-winbind - Samba nameservice integration plugins<br />
i libpam-ck-connector - ConsoleKit PAM module<br />
i libpam-ldap - Pluggable Authentication Module for LDAP<br />
i libpam-winbind - Windows domain authentication integration plugin<br />
i libphp-adodb - ADOdb database abstraction layer for PHP<br />
i libvirt-bin - programs for the libvirt library<br />
i linux-base - Linux image base package<br />
id linux-image-3.0.0-2-amd64 - Linux 3.0.0 for 64-bit PCs<br />
i lm-sensors - utilities to read temperature/voltage/fan sensors<br />
i locales-all - Embedded GNU C Library: Precompiled locale data<br />
i logrotate - Log rotation utility<br />
i lsof - Utility to list open files<br />
i lvm2 - Linux Logical Volume Manager<br />
i lxc - Linux Containers userspace tools<br />
i lynx - Text-mode WWW Browser (transitional package)<br />
i lzma - Compression and decompression in the LZMA format - command li<br />
i makedev - creates device files in /dev<br />
i man-db - on-line manual pager<br />
i manpages - Manual pages about using a GNU/Linux system<br />
i mcelog - x86 Machine Check Exceptions collector and decoder<br />
i mdadm - tool to administer Linux MD arrays (software RAID)<br />
i mencoder - MPlayer's Movie Encoder<br />
i mime-support - MIME files 'mime.types' & 'mailcap', and support programs<br />
i minicom - friendly menu driven serial communication program<br />
i mlocate - quickly find files on the filesystem based on their name<br />
i module-init-tools - transitional dummy package (module-init-tools to kmod)<br />
i molly-guard - protects machines from accidental shutdowns/reboots<br />
i monit - utility for monitoring and managing daemons or similar progra<br />
i mplayer - movie player for Unix-like systems<br />
i mscompress - Microsoft "compress.exe/expand.exe" compatible (de)compressor<br />
i munin - network-wide graphing framework (grapher/gatherer)<br />
i munin-doc - network-wide graphing framework (documentation)<br />
i munin-plugins-core - network-wide graphing framework (plugins for node)<br />
i munin-plugins-extra - network-wide graphing framework (user contributed plugins for<br />
i mutt - text-based mailreader supporting MIME, GPG, PGP and threading<br />
i mysql-client-5.5 - MySQL database client binaries<br />
i nano - small, friendly text editor inspired by Pico<br />
i ncftp - User-friendly and well-featured FTP client<br />
i ncurses-term - additional terminal type definitions<br />
i net-tools - The NET-3 networking toolkit<br />
i netbase - Basic TCP/IP networking system<br />
i netcat-traditional - TCP/IP swiss army knife<br />
i netpbm - Graphics conversion tools between image formats<br />
i nfs-common - NFS support files common to client and server<br />
i nfs-kernel-server - support for NFS kernel server<br />
i nmap - The Network Mapper<br />
i ntp - Network Time Protocol daemon and utility programs<br />
i ntpdate - client for setting system time from NTP servers<br />
i openbsd-inetd - OpenBSD Internet Superserver<br />
i openssh-client - secure shell (SSH) client, for secure access to remote machin<br />
i openssh-server - secure shell (SSH) server, for secure access from remote mach<br />
i openvpn - virtual private network daemon<br />
i patch - Apply a diff file to an original<br />
i pciutils - Linux PCI Utilities<br />
i pear-phpunit-channel - PEAR pear.phpunit.de channel definition file<br />
i pear-symfony-project-channel - PEAR Symfony Project channel definition file<br />
i php-codecoverage - provides collection, processing and rendering for PHP code co<br />
i php-file-iterator - FilterIterator implementation for PHP<br />
i php-invoker - utility class for invoking callables with a timeout<br />
i php-mail - PHP PEAR module for sending email<br />
i php-mail-mime - PHP PEAR module for creating MIME messages<br />
i php-pear - PEAR - PHP Extension and Application Repository<br />
i php-symfony-yaml - Symfony YAML: A PHP library that speaks YAML<br />
i php-text-template - Simple php template engine<br />
i php-timer - PHP Utility class for timing<br />
i php-token-stream - Wrapper around PHP's tokenizer extension<br />
i php5-adodb - Extension optimising the ADOdb database abstraction library<br />
i php5-curl - CURL module for php5<br />
i php5-ldap - LDAP module for php5<br />
i php5-sqlite - SQLite module for php5<br />
i php5-xdebug - Xdebug Module for PHP 5<br />
i php5-xmlrpc - XML-RPC module for php5<br />
i phpmyadmin - MySQL web administration tool<br />
i phpunit - Unit testing suite for PHP5<br />
i phpunit-mock-object - Mock Object library for PHPUnit<br />
i phpunit-story - extension to facilitate Behaviour-Driven Development<br />
i policykit-1 - framework for managing administrative policies and privileges<br />
i poppler-data - encoding data for the poppler PDF rendering library<br />
i postfix - High-performance mail transport agent<br />
i pppoe - PPP over Ethernet driver<br />
i pppoeconf - configures PPPoE/ADSL connections<br />
i printer-driver-all - printer drivers metapackage<br />
i printer-driver-c2050 - printer driver for Lexmark 2050 Color Jetprinter<br />
i printer-driver-c2esp - printer driver for Kodak ESP AiO color inkjet Series<br />
i printer-driver-cjet - printer driver for Canon LBP laser printers<br />
i printer-driver-escpr - printer driver for Epson Inkjet that use ESC/P-R<br />
i printer-driver-foo2zjs - printer driver for ZjStream-based printers<br />
i printer-driver-gutenprint - printer drivers for CUPS<br />
i printer-driver-hpcups - HP Linux Printing and Imaging - CUPS Raster driver (hpcups)<br />
i printer-driver-hpijs - HP Linux Printing and Imaging - gs IJS driver (hpijs)<br />
i printer-driver-m2300w - printer driver for Minolta magicolor 2300W/2400W color laser<br />
i printer-driver-min12xxw - printer driver for KonicaMinolta PagePro 1[234]xxW<br />
i printer-driver-pnm2ppa - printer driver for HP-GDI printers<br />
i printer-driver-postscript-hp - HP Printers PostScript Descriptions<br />
i printer-driver-ptouch - printer driver Brother P-touch label printers<br />
i printer-driver-pxljr - printer driver for HP Color LaserJet 35xx/36xx<br />
i printer-driver-sag-gdi - printer driver for Ricoh Aficio SP 1000s/SP 1100s<br />
i printer-driver-splix - Driver for Samsung and Xerox SPL2 and SPLc laser printers<br />
i procmail - Versatile e-mail processor<br />
i procps - /proc file system utilities<br />
i psutils - PostScript document handling utilities<br />
i python - interactive high-level object-oriented language (default vers<br />
i python-central - register and build utility for Python packages<br />
i python-crypto - cryptographic algorithms and protocols for Python<br />
i python-dbus - simple interprocess messaging system (Python interface)<br />
i python-dbus-dev - main loop integration development files for python-dbus<br />
i python-debianbts - Python interface to Debian's Bug Tracking System<br />
i python-dev - header files and a static library for Python (default)<br />
i python-fpconst - Utilities for handling IEEE 754 floating point special values<br />
i python-gi - Python 2.x bindings for gobject-introspection libraries<br />
i python-imaging - Python Imaging Library<br />
i python-ldap - LDAP interface module for Python<br />
i python-magic - File type determination library using "magic" numbers (Python<br />
i python-minimal - minimal subset of the Python language (default version)<br />
i python-pexpect - Python module for automating interactive applications<br />
i python-pyscard - Python wrapper above PC/SC API<br />
i python-renderpm - python low level render interface<br />
i python-reportlab - ReportLab library to create PDF documents using Python<br />
i python-reportlab-accel - C coded extension accelerator for the ReportLab Toolkit<br />
i python-serial - pyserial - module encapsulating access for the serial port<br />
i python-soappy - SOAP Support for Python<br />
i python-sqlite - Python interface to SQLite 2<br />
i python2.7 - Interactive high-level object-oriented language (version 2.7)<br />
i python2.7-dev - Header files and a static library for Python (v2.7)<br />
i python2.7-minimal - Minimal subset of the Python language (version 2.7)<br />
i qemu-keymaps - QEMU keyboard maps<br />
i qemu-utils - QEMU utilities<br />
i quagga - BGP/OSPF/RIP routing daemon<br />
i quilt - Tool to work with series of patches<br />
i readline-common - GNU readline and history libraries, common files<br />
i reportbug - reports bugs in the Debian distribution<br />
i rpcbind - converts RPC program numbers into universal addresses<br />
i rsync - fast, versatile, remote (and local) file-copying tool<br />
i rsyslog - reliable system and kernel logging daemon<br />
i samba - SMB/CIFS file, print, and login server for Unix<br />
i samba-doc - Samba documentation<br />
i sane-utils - API library for scanners -- utilities<br />
i screen - terminal multiplexer with VT100/ANSI terminal emulation<br />
i seabios - Legacy BIOS implementation<br />
i sharutils - shar, unshar, uuencode, uudecode<br />
i slapd - OpenLDAP server (slapd)<br />
i smartmontools - control and monitor storage systems using S.M.A.R.T.<br />
i smbclient - command-line SMB/CIFS clients for Unix<br />
i sqlite - command line interface for SQLite<br />
i squid3 - Full featured Web Proxy cache (HTTP proxy)<br />
i squid3-common - Full featured Web Proxy cache (HTTP proxy) - common files<br />
i strace - A system call tracer<br />
i strongswan - IPsec VPN solution metapackage<br />
i subversion - Advanced version control system<br />
i sudo-ldap - Provide limited super user privileges to specific users<br />
i tasksel - Tool for selecting tasks for installation on Debian systems<br />
i tasksel-data - Official tasks used for installation of Debian systems<br />
i tcpd - Wietse Venema's TCP wrapper utilities<br />
i tcpdump - command-line network traffic analyzer<br />
i tdb-tools - Trivial Database - bundled binaries<br />
i telnet - The telnet client<br />
i texinfo - Documentation system for on-line information and printed outp<br />
i tftpd-hpa - HPA's tftp server<br />
i time - GNU time program for measuring CPU resource usage<br />
i tmux - terminal multiplexer<br />
i traceroute - Traces the route taken by packets over an IPv4/IPv6 network<br />
i tshark - network traffic analyzer - console version<br />
i ucf - Update Configuration File: preserve user changes to config fi<br />
i udev - /dev/ and hotplug management daemon<br />
i udhcpd - Provides the busybox DHCP server implementation<br />
i unscd - Micro Name Service Caching Daemon<br />
i unzip - De-archiver for .zip files<br />
i update-inetd - inetd configuration file updater<br />
i usbutils - Linux USB utilities<br />
i vgabios - VGA BIOS software for the Bochs and Qemu emulated VGA card<br />
i vim - Vi IMproved - enhanced vi editor<br />
i vim-common - Vi IMproved - Common files<br />
i vlan - user mode programs to enable VLANs on your ethernet devices<br />
i w3m - WWW browsable pager with excellent tables/frames support<br />
i wamerican - American English dictionary words for /usr/share/dict<br />
i wget - retrieves files from the web<br />
i whiptail - Displays user-friendly dialog boxes from shell scripts<br />
i whois - intelligent WHOIS client<br />
i wide-dhcpv6-server - DHCPv6 server for automatic IPv6 hosts configuration<br />
i winbind - Samba nameservice integration server<br />
i wireless-tools - Tools for manipulating Linux Wireless Extensions<br />
i wpasupplicant - client support for WPA and WPA2 (IEEE 802.11i)<br />
i xfsprogs - Utilities for managing the XFS filesystem<br />
i xkb-data - X Keyboard Extension (XKB) configuration data<br />
i zile - very small Emacs-subset editor<br />
i zsh - shell with lots of features<br />
</code></div>Stereo//wiki.syn2cat.lu/wiki/LusitaniaLusitania2013-05-21T03:15:13Z<p>Stereo: </p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=lusitania.lan<br />
|ehostname=lusitania.int.hackerspace.lu<br />
|ip=192.168.1.24<br />
|type=server<br />
|brand=custom<br />
|model=custom<br />
|operatingsystem=debian GNU/Linux<br />
|services=apache2,mysqld,icinga,cifs,nfs,dns,...<br />
|admin=sim0n, Stereo<br />
|museum=no<br />
|name=lusitania<br />
|os=debian 7.0<br />
}}<br />
== Synopsis ==<br />
The name's "lusitania" and the purpose is: '''main server at the hackerspace'''<br />
<br />
External access through lusitania.int.hackerspace.lu (ipv4 and ipv6)<br />
<br />
It has become a part of our main space infrastructure, hosting a fileserver, functioning as WiFi access-point, hosting a freeradius server and more.<br />
<br />
== Services ==<br />
<br />
* DHCP for LAN<br />
* v6 announcement for LAN<br />
* UPS monitoring<br />
* Update the status from Openduino to space.syn2cat.lu<br />
* Munin<br />
* IPSec tunnel<br />
* tftpd (in use?)<br />
* cacti (in use?)<br />
* MySQL (in use?)<br />
* squid (in use?)<br />
* samba (in use?)<br />
* slapd (openldap)<br />
* pppoe connection to the internet<br />
* libvirtd (in use?)<br />
* rpc.idmapd (in use?)<br />
* nscd (in use?)<br />
* portmap (in use?)<br />
* postfix (in use?)<br />
* aiccu (ipv6 tunnel to sixxs)<br />
* OpenVPN (in use?)<br />
* Munin-node<br />
* Smartd<br />
* NFSD (in use?)<br />
* NMBD (in use?)<br />
* Freeradius (in use?)<br />
* Muling's bwmon for the meter in the rack<br />
* NTPD<br />
<br />
== Fileserver ==<br />
=== Windows share ===<br />
The server may be access from Windows clients and other clients using the smb/cifs protocol.<br />
The server can be located by browsing the net or simply using "\\lusitania.lan"<br />
<br />
=== NFS ===<br />
NFSv3 and NFSv4 may be used for accessing the file server<br />
==== NFSv3 ====<br />
<pre><br />
mount -t nfs lusitania.lan:/work /mnt/target<br />
</pre><br />
<br />
==== NFSv4 ====<br />
<pre><br />
mount -t nfs4 lusitania.lan:/ /mnt/target<br />
</pre><br />
<br />
<br />
== Music server ==<br />
You may access the music server using a webbrowser at this address: [http://lusitania.lan/ampache http://lusitania.lan/ampache] <br><br />
The login is '''admin / admin''', feel free to create yourself an account !<br><br />
Ampache may be used to stream music to any '''mpd''' server on the LAN.<br />
<br />
== Cruft ==<br />
<br />
Many packages are installed on lusitania. Most of those are probably useless.<br />
<br />
===List of installed non-essential packages that have no other packages depending on them:===<br />
<nowiki><br />
i 3ware-cli-binary - Command Line Interface for 3Ware Controllers<br />
i acl - Access control list utilities<br />
i acpi-support-base - scripts for handling base ACPI events such as the power butto<br />
i acpid - Advanced Configuration and Power Interface event daemon<br />
i adduser - add and remove users and groups<br />
i aiccu - SixXS Automatic IPv6 Connectivity Client Utility<br />
i ampache-themes - Themes for Ampache<br />
i apcupsd - APC UPS Power Management (daemon)<br />
i apt-dater-host - host helper application for apt-dater<br />
i apt-utils - package managment related utility programs<br />
i apticron - Simple tool to mail about pending package updates<br />
i aptitude - terminal-based package manager<br />
i aptitude-common - architecture indepedent files for the aptitude package manage<br />
i at - Delayed job execution and batch processing<br />
i avahi-daemon - Avahi mDNS/DNS-SD daemon<br />
i bash-completion - programmable completion for the bash shell<br />
i bc - The GNU bc arbitrary precision calculator language<br />
i bind9 - Internet Domain Name Server<br />
i bind9-host - Version of 'host' bundled with BIND 9.X<br />
i bmon - portable bandwidth monitor and rate estimator<br />
i bridge-utils - Utilities for configuring the Linux Ethernet bridge<br />
i bsd-mailx - simple mail user agent<br />
i bsdmainutils - collection of more utilities from FreeBSD<br />
i build-essential - Informational list of build-essential packages<br />
i busybox - Tiny utilities for small and embedded systems<br />
i bwm-ng - small and simple console-based bandwidth monitor<br />
i cacti - web interface for graphing of monitoring systems<br />
i colord - system service to manage device colour profiles -- system dae<br />
i colordiff - tool to colorize 'diff' output<br />
i conntrack - Program to modify the conntrack tables<br />
i console-common - basic infrastructure for text console configuration<br />
i console-data - keymaps, fonts, charset maps, fallback tables for console-too<br />
i console-setup - console font and keymap setup program<br />
i console-setup-linux - Linux specific part of console-setup<br />
i consolekit - framework for defining and tracking users, sessions and seats<br />
i cpio - GNU cpio -- a program to manage archives of files<br />
i cron - process scheduling daemon<br />
i cryptsetup - disk encryption support - startup scripts<br />
i cryptsetup-bin - disk encryption support - command line tools<br />
i cups - Common UNIX Printing System(tm) - server<br />
i cups-filters - OpenPrinting CUPS Filters<br />
i dc - The GNU dc arbitrary precision reverse-polish calculator<br />
i ddclient - address updating utility for dynamic DNS services<br />
i debian-archive-keyring - GnuPG archive keys of the Debian archive<br />
i debian-faq - Debian FAQ<br />
i debian-keyring - GnuPG keys of Debian Developers<br />
i debootstrap - Bootstrap a basic Debian system<br />
i denyhosts - Utility to help sys admins thwart SSH crackers<br />
i dictionaries-common - Common utilities for spelling dictionary tools<br />
i dmidecode - SMBIOS/DMI table decoder<br />
i dnsmasq-base - Small caching DNS proxy and DHCP/TFTP server<br />
i dnsutils - Clients provided with BIND<br />
i doc-debian - Debian Project documentation and other documents<br />
i dos2unix - convert text file line endings between CRLF and LF<br />
i dsniff - Various tools to sniff network traffic for cleartext insecuri<br />
i ed - classic UNIX line editor<br />
i eject - ejects CDs and operates CD-Changers under Linux<br />
i etckeeper - store /etc in git, mercurial, bzr or darcs<br />
i etherwake - A little tool to send magic Wake-on-LAN packets<br />
i ethstatus - console-based ethernet statistics monitor<br />
i ethtool - display or change Ethernet device settings<br />
i fdupes - identifies duplicate files within given directories<br />
i file - Determines file type using "magic" numbers<br />
i firmware-linux - Binary firmware for various drivers in the Linux kernel (meta<br />
i firmware-linux-nonfree - Binary firmware for various drivers in the Linux kernel<br />
i fonts-droid - handheld device font with extensive style and language suppor<br />
i fonts-freefont-ttf - Freefont Serif, Sans and Mono Truetype fonts<br />
i fonts-liberation - Fonts with the same metrics as Times, Arial and Courier<br />
i freeradius-common - FreeRADIUS common files<br />
i freeradius-utils - FreeRADIUS client utilities<br />
i ftp - classical file transfer client<br />
i gdisk - GPT fdisk text-mode partitioning tool<br />
i gettext-base - GNU Internationalization utilities for the base system<br />
i gir1.2-glib-2.0 - Introspection data for GLib, GObject, Gio and GModule<br />
i git-core - fast, scalable, distributed revision control system (obsolete<br />
i git-man - fast, scalable, distributed revision control system (manual p<br />
i gnupg - GNU privacy guard - a free PGP replacement<br />
i gnuplot - Command-line driven interactive plotting program<br />
i gnuplot-nox - Command-line driven interactive plotting program. No-X packag<br />
i gnutls-bin - GNU TLS library - commandline utilities<br />
i gpgv - GNU privacy guard - signature verification tool<br />
i groff - GNU troff text-formatting system<br />
i groff-base - GNU troff text-formatting system (base system components)<br />
i grub-common - GRand Unified Bootloader (common files)<br />
i grub-pc - GRand Unified Bootloader, version 2 (PC/BIOS version)<br />
i grub-pc-bin - GRand Unified Bootloader, version 2 (PC/BIOS binaries)<br />
i grub2-common - GRand Unified Bootloader (common files for version 2)<br />
i hdparm - tune hard disk parameters for high performance<br />
i hplip - HP Linux Printing and Imaging System (HPLIP)<br />
i hplip-data - HP Linux Printing and Imaging - data files<br />
i htop - interactive processes viewer<br />
i iamerican - American English dictionary for ispell (standard version)<br />
i ibritish - British English dictionary for ispell (standard version)<br />
i ienglish-common - Common files for British and American ispell dictionaries<br />
i ifenslave-2.6 - Attach and detach slave interfaces to a bonding device<br />
i iftop - displays bandwidth usage information on an network interface<br />
i ifupdown - high level tools to configure network interfaces<br />
i imagemagick - image manipulation programs<br />
i imagemagick-common - image manipulation programs -- infrastructure<br />
i imvirt-helper - helper programs to detect several virtualizations<br />
i info - Standalone GNU Info documentation browser<br />
i initramfs-tools - generic modular initramfs generator<br />
i installation-report - system installation report<br />
i iodbc - GTK+ config frontend for the iODBC Driver Manager<br />
i iproute - networking and traffic control tools<br />
i ipset - administration tool for kernel IP sets<br />
i iptables - administration tools for packet filtering and NAT<br />
i iptraf - Interactive Colorful IP LAN Monitor<br />
i iptstate - top-like interface to your netfilter connection-tracking tabl<br />
i iputils-ping - Tools to test the reachability of network hosts<br />
i ipxe-qemu - PXE boot firmware - ROM images for qemu<br />
i isc-dhcp-server - ISC DHCP server for automatic IP address assignment<br />
i ispell - International Ispell (an interactive spelling corrector)<br />
i john - active password cracking tool<br />
i john-data - active password cracking tool - character sets<br />
i kbd - Linux console font and keytable utilities<br />
i kernel-package - A utility for building Linux kernel related Debian packages.<br />
i keyboard-configuration - system-wide keyboard preferences<br />
i keyutils - Linux Key Management Utilities<br />
i kmod - tools for managing Linux kernel modules<br />
i krb5-locales - Internationalization support for MIT Kerberos<br />
i laptop-detect - attempt to detect a laptop<br />
i ldap-utils - OpenLDAP utilities<br />
i less - pager program similar to more<br />
i libgphoto2-l10n - gphoto2 digital camera library - localized messages<br />
i libjs-jquery - JavaScript library for dynamic web applications<br />
i libjs-yui - Yahoo User Interface Library<br />
i liblinear-tools - Standalone applications for LIBLINEAR<br />
i liblockfile-bin - support binaries for and cli utilities based on liblockfile<br />
i libnss-ldap - NSS module for using LDAP as a naming service<br />
i libnss-mdns - NSS module for Multicast DNS name resolution<br />
i libnss-winbind - Samba nameservice integration plugins<br />
i libpam-ck-connector - ConsoleKit PAM module<br />
i libpam-ldap - Pluggable Authentication Module for LDAP<br />
i libpam-winbind - Windows domain authentication integration plugin<br />
i libphp-adodb - ADOdb database abstraction layer for PHP<br />
i libvirt-bin - programs for the libvirt library<br />
i linux-base - Linux image base package<br />
id linux-image-3.0.0-2-amd64 - Linux 3.0.0 for 64-bit PCs<br />
i lm-sensors - utilities to read temperature/voltage/fan sensors<br />
i locales-all - Embedded GNU C Library: Precompiled locale data<br />
i logrotate - Log rotation utility<br />
i lsof - Utility to list open files<br />
i lvm2 - Linux Logical Volume Manager<br />
i lxc - Linux Containers userspace tools<br />
i lynx - Text-mode WWW Browser (transitional package)<br />
i lzma - Compression and decompression in the LZMA format - command li<br />
i makedev - creates device files in /dev<br />
i man-db - on-line manual pager<br />
i manpages - Manual pages about using a GNU/Linux system<br />
i mcelog - x86 Machine Check Exceptions collector and decoder<br />
i mdadm - tool to administer Linux MD arrays (software RAID)<br />
i mencoder - MPlayer's Movie Encoder<br />
i mime-support - MIME files 'mime.types' & 'mailcap', and support programs<br />
i minicom - friendly menu driven serial communication program<br />
i mlocate - quickly find files on the filesystem based on their name<br />
i module-init-tools - transitional dummy package (module-init-tools to kmod)<br />
i molly-guard - protects machines from accidental shutdowns/reboots<br />
i monit - utility for monitoring and managing daemons or similar progra<br />
i mplayer - movie player for Unix-like systems<br />
i mscompress - Microsoft "compress.exe/expand.exe" compatible (de)compressor<br />
i munin - network-wide graphing framework (grapher/gatherer)<br />
i munin-doc - network-wide graphing framework (documentation)<br />
i munin-plugins-core - network-wide graphing framework (plugins for node)<br />
i munin-plugins-extra - network-wide graphing framework (user contributed plugins for<br />
i mutt - text-based mailreader supporting MIME, GPG, PGP and threading<br />
i mysql-client-5.5 - MySQL database client binaries<br />
i nano - small, friendly text editor inspired by Pico<br />
i ncftp - User-friendly and well-featured FTP client<br />
i ncurses-term - additional terminal type definitions<br />
i net-tools - The NET-3 networking toolkit<br />
i netbase - Basic TCP/IP networking system<br />
i netcat-traditional - TCP/IP swiss army knife<br />
i netpbm - Graphics conversion tools between image formats<br />
i nfs-common - NFS support files common to client and server<br />
i nfs-kernel-server - support for NFS kernel server<br />
i nmap - The Network Mapper<br />
i ntp - Network Time Protocol daemon and utility programs<br />
i ntpdate - client for setting system time from NTP servers<br />
i openbsd-inetd - OpenBSD Internet Superserver<br />
i openssh-client - secure shell (SSH) client, for secure access to remote machin<br />
i openssh-server - secure shell (SSH) server, for secure access from remote mach<br />
i openvpn - virtual private network daemon<br />
i patch - Apply a diff file to an original<br />
i pciutils - Linux PCI Utilities<br />
i pear-phpunit-channel - PEAR pear.phpunit.de channel definition file<br />
i pear-symfony-project-channel - PEAR Symfony Project channel definition file<br />
i php-codecoverage - provides collection, processing and rendering for PHP code co<br />
i php-file-iterator - FilterIterator implementation for PHP<br />
i php-invoker - utility class for invoking callables with a timeout<br />
i php-mail - PHP PEAR module for sending email<br />
i php-mail-mime - PHP PEAR module for creating MIME messages<br />
i php-pear - PEAR - PHP Extension and Application Repository<br />
i php-symfony-yaml - Symfony YAML: A PHP library that speaks YAML<br />
i php-text-template - Simple php template engine<br />
i php-timer - PHP Utility class for timing<br />
i php-token-stream - Wrapper around PHP's tokenizer extension<br />
i php5-adodb - Extension optimising the ADOdb database abstraction library<br />
i php5-curl - CURL module for php5<br />
i php5-ldap - LDAP module for php5<br />
i php5-sqlite - SQLite module for php5<br />
i php5-xdebug - Xdebug Module for PHP 5<br />
i php5-xmlrpc - XML-RPC module for php5<br />
i phpmyadmin - MySQL web administration tool<br />
i phpunit - Unit testing suite for PHP5<br />
i phpunit-mock-object - Mock Object library for PHPUnit<br />
i phpunit-story - extension to facilitate Behaviour-Driven Development<br />
i policykit-1 - framework for managing administrative policies and privileges<br />
i poppler-data - encoding data for the poppler PDF rendering library<br />
i postfix - High-performance mail transport agent<br />
i pppoe - PPP over Ethernet driver<br />
i pppoeconf - configures PPPoE/ADSL connections<br />
i printer-driver-all - printer drivers metapackage<br />
i printer-driver-c2050 - printer driver for Lexmark 2050 Color Jetprinter<br />
i printer-driver-c2esp - printer driver for Kodak ESP AiO color inkjet Series<br />
i printer-driver-cjet - printer driver for Canon LBP laser printers<br />
i printer-driver-escpr - printer driver for Epson Inkjet that use ESC/P-R<br />
i printer-driver-foo2zjs - printer driver for ZjStream-based printers<br />
i printer-driver-gutenprint - printer drivers for CUPS<br />
i printer-driver-hpcups - HP Linux Printing and Imaging - CUPS Raster driver (hpcups)<br />
i printer-driver-hpijs - HP Linux Printing and Imaging - gs IJS driver (hpijs)<br />
i printer-driver-m2300w - printer driver for Minolta magicolor 2300W/2400W color laser<br />
i printer-driver-min12xxw - printer driver for KonicaMinolta PagePro 1[234]xxW<br />
i printer-driver-pnm2ppa - printer driver for HP-GDI printers<br />
i printer-driver-postscript-hp - HP Printers PostScript Descriptions<br />
i printer-driver-ptouch - printer driver Brother P-touch label printers<br />
i printer-driver-pxljr - printer driver for HP Color LaserJet 35xx/36xx<br />
i printer-driver-sag-gdi - printer driver for Ricoh Aficio SP 1000s/SP 1100s<br />
i printer-driver-splix - Driver for Samsung and Xerox SPL2 and SPLc laser printers<br />
i procmail - Versatile e-mail processor<br />
i procps - /proc file system utilities<br />
i psutils - PostScript document handling utilities<br />
i python - interactive high-level object-oriented language (default vers<br />
i python-central - register and build utility for Python packages<br />
i python-crypto - cryptographic algorithms and protocols for Python<br />
i python-dbus - simple interprocess messaging system (Python interface)<br />
i python-dbus-dev - main loop integration development files for python-dbus<br />
i python-debianbts - Python interface to Debian's Bug Tracking System<br />
i python-dev - header files and a static library for Python (default)<br />
i python-fpconst - Utilities for handling IEEE 754 floating point special values<br />
i python-gi - Python 2.x bindings for gobject-introspection libraries<br />
i python-imaging - Python Imaging Library<br />
i python-ldap - LDAP interface module for Python<br />
i python-magic - File type determination library using "magic" numbers (Python<br />
i python-minimal - minimal subset of the Python language (default version)<br />
i python-pexpect - Python module for automating interactive applications<br />
i python-pyscard - Python wrapper above PC/SC API<br />
i python-renderpm - python low level render interface<br />
i python-reportlab - ReportLab library to create PDF documents using Python<br />
i python-reportlab-accel - C coded extension accelerator for the ReportLab Toolkit<br />
i python-serial - pyserial - module encapsulating access for the serial port<br />
i python-soappy - SOAP Support for Python<br />
i python-sqlite - Python interface to SQLite 2<br />
i python2.7 - Interactive high-level object-oriented language (version 2.7)<br />
i python2.7-dev - Header files and a static library for Python (v2.7)<br />
i python2.7-minimal - Minimal subset of the Python language (version 2.7)<br />
i qemu-keymaps - QEMU keyboard maps<br />
i qemu-utils - QEMU utilities<br />
i quagga - BGP/OSPF/RIP routing daemon<br />
i quilt - Tool to work with series of patches<br />
i readline-common - GNU readline and history libraries, common files<br />
i reportbug - reports bugs in the Debian distribution<br />
i rpcbind - converts RPC program numbers into universal addresses<br />
i rsync - fast, versatile, remote (and local) file-copying tool<br />
i rsyslog - reliable system and kernel logging daemon<br />
i samba - SMB/CIFS file, print, and login server for Unix<br />
i samba-doc - Samba documentation<br />
i sane-utils - API library for scanners -- utilities<br />
i screen - terminal multiplexer with VT100/ANSI terminal emulation<br />
i seabios - Legacy BIOS implementation<br />
i sharutils - shar, unshar, uuencode, uudecode<br />
i slapd - OpenLDAP server (slapd)<br />
i smartmontools - control and monitor storage systems using S.M.A.R.T.<br />
i smbclient - command-line SMB/CIFS clients for Unix<br />
i sqlite - command line interface for SQLite<br />
i squid3 - Full featured Web Proxy cache (HTTP proxy)<br />
i squid3-common - Full featured Web Proxy cache (HTTP proxy) - common files<br />
i strace - A system call tracer<br />
i strongswan - IPsec VPN solution metapackage<br />
i subversion - Advanced version control system<br />
i sudo-ldap - Provide limited super user privileges to specific users<br />
i tasksel - Tool for selecting tasks for installation on Debian systems<br />
i tasksel-data - Official tasks used for installation of Debian systems<br />
i tcpd - Wietse Venema's TCP wrapper utilities<br />
i tcpdump - command-line network traffic analyzer<br />
i tdb-tools - Trivial Database - bundled binaries<br />
i telnet - The telnet client<br />
i texinfo - Documentation system for on-line information and printed outp<br />
i tftpd-hpa - HPA's tftp server<br />
i time - GNU time program for measuring CPU resource usage<br />
i tmux - terminal multiplexer<br />
i traceroute - Traces the route taken by packets over an IPv4/IPv6 network<br />
i tshark - network traffic analyzer - console version<br />
i ucf - Update Configuration File: preserve user changes to config fi<br />
i udev - /dev/ and hotplug management daemon<br />
i udhcpd - Provides the busybox DHCP server implementation<br />
i unscd - Micro Name Service Caching Daemon<br />
i unzip - De-archiver for .zip files<br />
i update-inetd - inetd configuration file updater<br />
i usbutils - Linux USB utilities<br />
i vgabios - VGA BIOS software for the Bochs and Qemu emulated VGA card<br />
i vim - Vi IMproved - enhanced vi editor<br />
i vim-common - Vi IMproved - Common files<br />
i vlan - user mode programs to enable VLANs on your ethernet devices<br />
i w3m - WWW browsable pager with excellent tables/frames support<br />
i wamerican - American English dictionary words for /usr/share/dict<br />
i wget - retrieves files from the web<br />
i whiptail - Displays user-friendly dialog boxes from shell scripts<br />
i whois - intelligent WHOIS client<br />
i wide-dhcpv6-server - DHCPv6 server for automatic IPv6 hosts configuration<br />
i winbind - Samba nameservice integration server<br />
i wireless-tools - Tools for manipulating Linux Wireless Extensions<br />
i wpasupplicant - client support for WPA and WPA2 (IEEE 802.11i)<br />
i xfsprogs - Utilities for managing the XFS filesystem<br />
i xkb-data - X Keyboard Extension (XKB) configuration data<br />
i zile - very small Emacs-subset editor<br />
i zsh - shell with lots of features<br />
</nowiki></div>Stereo//wiki.syn2cat.lu/wiki/LusitaniaLusitania2013-05-20T21:59:41Z<p>Stereo: List all services on this mess</p>
<hr />
<div>[[Category:Network]]<br />
{{Computer<br />
|hostname=lusitania.lan<br />
|ehostname=lusitania.int.hackerspace.lu<br />
|ip=192.168.1.24<br />
|type=server<br />
|brand=custom<br />
|model=custom<br />
|operatingsystem=debian GNU/Linux<br />
|services=apache2,mysqld,icinga,cifs,nfs,dns,...<br />
|admin=sim0n, kwisatz<br />
|museum=no<br />
|name=lusitania<br />
|os=debian<br />
}}<br />
== Synopsis ==<br />
The name's "lusitania" and the purpose is: '''main server at the hackerspace'''<br />
<br />
External access through lusitania.int.hackerspace.lu (ipv4 and ipv6)<br />
<br />
It has become a part of our main space infrastructure, hosting a fileserver, functioning as WiFi access-point, hosting a freeradius server and more.<br />
<br />
== Services ==<br />
<br />
* DHCP for LAN<br />
* v6 announcement for LAN<br />
* UPS monitoring<br />
* Update the status from Openduino to space.syn2cat.lu<br />
* Munin<br />
* IPSec tunnel<br />
* tftpd (in use?)<br />
* cacti (in use?)<br />
* MySQL (in use?)<br />
* squid (in use?)<br />
* samba (in use?)<br />
* slapd (openldap)<br />
* pppoe connection to the internet<br />
* libvirtd (in use?)<br />
* rpc.idmapd (in use?)<br />
* nscd (in use?)<br />
* portmap (in use?)<br />
* postfix (in use?)<br />
* aiccu (ipv6 tunnel to sixxs)<br />
* OpenVPN (in use?)<br />
* Munin-node<br />
* Smartd<br />
* NFSD (in use?)<br />
* NMBD (in use?)<br />
* Freeradius (in use?)<br />
* Muling's bwmon for the meter in the rack<br />
* NTPD<br />
<br />
== Fileserver ==<br />
=== Windows share ===<br />
The server may be access from Windows clients and other clients using the smb/cifs protocol.<br />
The server can be located by browsing the net or simply using "\\lusitania.lan"<br />
<br />
=== NFS ===<br />
NFSv3 and NFSv4 may be used for accessing the file server<br />
==== NFSv3 ====<br />
<pre><br />
mount -t nfs lusitania.lan:/work /mnt/target<br />
</pre><br />
<br />
==== NFSv4 ====<br />
<pre><br />
mount -t nfs4 lusitania.lan:/ /mnt/target<br />
</pre><br />
<br />
<br />
== Music server ==<br />
You may access the music server using a webbrowser at this address: [http://lusitania.lan/ampache http://lusitania.lan/ampache] <br><br />
The login is '''admin / admin''', feel free to create yourself an account !<br><br />
Ampache may be used to stream music to any '''mpd''' server on the LAN.</div>Stereo//wiki.syn2cat.lu/wiki/Syn2cat_goes_ScienceFestival2013Syn2cat goes ScienceFestival20132013-05-15T22:11:30Z<p>Stereo: </p>
<hr />
<div>{{Event<br />
|attendees=Gunstick,<br />
|eventtype=Event<br />
|subtitle=Non Newtonian Fluids<br />
|description=Is it a solid, is it a liquid? It's a solquid! Non newtonian fluids are changing between liquid and solid properties depending on exerted pressure. There will be several experiments showing the surprising properties of those substances.<br />
|contact=Gunstick<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/11/07<br />
|till=2013/11/10<br />
|location=MNHN, Luxembourg<br />
|logo=ScienceFestival2013big.jpg<br />
|announce=yes<br />
|cost=0 EUR<br />
|url=https://wiki.hackerspace.lu/wiki/ScienceFestival2013<br />
|u19=yes<br />
}}<br />
Our activity at the science festival 2013 will be about non newtonian fluids. A liquid which becomes solid if you hit it. A visquous mass which becomes liquid if you push it. Several possibilities will be shown where you can observe the "stuff" and try out some experiments yourself.<br />
<br />
Website of the science festival: http://science-festival.lu/<br />
<br />
What's needed for 17 may:<br />
<br />
<br />
* the '''title''' (no more than 50 characters) and a '''short and attractive description''' (no more than 300 characters) of your activity (in French and German), with a view to encouraging people to participate;<br />
* your organisation’s '''logo''' (if applicable) and '''a selection of digital photographs''' (of which we will choose the most suitable) that illustrate your activity;<br />
* your '''special requirements''' (electricity, water supply, tables,...).</div>Stereo//wiki.syn2cat.lu/wiki/Syn2cat_goes_ScienceFestival2013Syn2cat goes ScienceFestival20132013-05-15T22:11:16Z<p>Stereo: What's needed</p>
<hr />
<div>{{Event<br />
|attendees=Gunstick,<br />
|eventtype=Event<br />
|subtitle=Non Newtonian Fluids<br />
|description=Is it a solid, is it a liquid? It's a solquid! Non newtonian fluids are changing between liquid and solid properties depending on exerted pressure. There will be several experiments showing the surprising properties of those substances.<br />
|contact=Gunstick<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/11/07<br />
|till=2013/11/10<br />
|location=MNHN, Luxembourg<br />
|logo=ScienceFestival2013big.jpg<br />
|announce=yes<br />
|cost=0 EUR<br />
|url=https://wiki.hackerspace.lu/wiki/ScienceFestival2013<br />
|u19=yes<br />
}}<br />
Our activity at the science festival 2013 will be about non newtonian fluids. A liquid which becomes solid if you hit it. A visquous mass which becomes liquid if you push it. Several possibilities will be shown where you can observe the "stuff" and try out some experiments yourself.<br />
<br />
Website of the science festival: http://science-festival.lu/<br />
<br />
What's needed for 17 may:<br />
<br />
<br />
* the '''title''' (no more than 50 characters) and a '''short and attractive description''' (no more than 300 characters) of your activity (in French and German), with a view to encouraging people to participate;<br />
* your organisation’s '''logo''' (if applicable) and '''a selection of digital photographs''' (of which we will choose the most suitable) that illustrate your activity;<br />
your '''special requirements''' (electricity, water supply, tables,...).</div>Stereo//wiki.syn2cat.lu/wiki/Bootstrap_2013-05Bootstrap 2013-052013-05-13T13:53:13Z<p>Stereo: </p>
<hr />
<div>{{Event<br />
|eventtype=Event<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, Nick17, NPU, sid, Stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/05/18 19:00<br />
|till=2013/05/18 23:30<br />
|location=Hackerspace, Strassen<br />
|logo=Bootstraps.gif<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
* Rearranging the [[Lab]]. Look at [[Lab]] for some basic ideas. [[User:Gunstick|Gunstick]] ([[User talk:Gunstick|talk]]) 18:17, 12 May 2013 (CEST)<br />
* Cleaner [[User:Stereo|Stereo]] ([[User talk:Stereo|talk]]) 15:53, 13 May 2013 (CEST)<br />
* News from the office [[User:Stereo|Stereo]] ([[User talk:Stereo|talk]]) 15:53, 13 May 2013 (CEST)<br />
<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --></div>Stereo//wiki.syn2cat.lu/wiki/User:StereoUser:Stereo2013-05-11T11:11:36Z<p>Stereo: The Quest</p>
<hr />
<div>{{Person<br />
|Firstname=Guillaume<br />
|Surname=Rischard<br />
|Website=http://stereo.lu<br />
|Email=syn2cat@stereo.lu<br />
|Skills=I can hold my breath for ten minutes!<br />
|Member of=C3L<br />
}}<br />
<br />
Current projects:<br />
<br />
* Cappuduino - Arduino-controlled Gaggia espresso machine. <br />
* Humidity and temperature logger<br />
* [[Ultimaker]] tuning and improvements<br />
* Sunrise alarm clock<br />
<br />
Ideas:<br />
<br />
* The hackerspace [[User:Stereo/The_Quest | “is meant for traffic, not to be used as a lumber-room for disused miracles.”]]</div>Stereo//wiki.syn2cat.lu/wiki/User:Stereo/The_QuestUser:Stereo/The Quest2013-05-11T11:09:39Z<p>Stereo: </p>
<hr />
<div>== The Quest ==<br />
<small>''from The Chronicles of Clovis, by Saki (1911)''</small><br />
<br />
:<big>The hackerspace “is meant for traffic, not to be used as a lumber-room for disused miracles.”</big><br />
<br />
An unwonted peace hung over the Villa Elsinore, broken, however, at frequent intervals, by clamorous lamentations suggestive of bewildered bereavement. The Momebys had lost their infant child; hence the peace which its absence entailed; they were looking for it in wild, undisciplined fashion, giving tongue the whole time, which accounted for the outcry which swept through house and garden whenever they returned to try the home coverts anew. Clovis, who was temporarily and unwillingly a paying guest at the villa, had been dozing in a hammock at the far end of the garden when Mrs. Momeby had broken the news to him.<br />
<br />
“We’ve lost Baby,” she screamed.<br />
<br />
“Do you mean that it’s dead, or stampeded, or that you staked it at cards and lost it that way?” asked Clovis lazily.<br />
<br />
“He was toddling about quite happily on the lawn,” said Mrs. Momeby tearfully, “and Arnold had just come in, and I was asking him what sort of sauce he would like with the asparagus—”<br />
<br />
“I hope he said hollandaise,” interrupted Clovis, with a show of quickened interest, “because if there’s anything I hate—”<br />
<br />
“And all of a sudden I missed Baby,” continued Mrs. Momeby in a shriller tone. “We’ve hunted high and low, in house and garden and outside the gates, and he’s nowhere to be seen.”<br />
<br />
“Is he anywhere to be heard?” asked Clovis; “if not, he must be at least two miles away.”<br />
<br />
“But where? And how?” asked the distracted mother.<br />
<br />
“Perhaps an eagle or a wild beast has carried him off,” suggested Clovis.<br />
<br />
“There aren’t eagles and wild beasts in Surrey,” said Mrs. Momeby, but a note of horror had crept into her voice.<br />
<br />
“They escape now and then from travelling shows. Sometimes I think they let them get loose for the sake of the advertisement. Think what a sensational headline it would make in the local papers: ‘Infant son of prominent Nonconformist devoured by spotted hyaena.’ Your husband isn’t a prominent Nonconformist, but his mother came of Wesleyan stock, and you must allow the newspapers some latitude.”<br />
<br />
“But we should have found his remains,” sobbed Mrs. Momeby.<br />
<br />
“If the hyaena was really hungry and not merely toying with his food there wouldn’t be much in the way of remains. It would be like the small-boy-and-apple story—there ain’t going to be no core.”<br />
<br />
Mrs. Momeby turned away hastily to seek comfort and counsel in some other direction. With the selfish absorption of young motherhood she entirely disregarded Clovis’s obvious anxiety about the asparagus sauce. Before she had gone a yard, however, the click of the side gate caused her to pull up sharp. Miss Gilpet, from the Villa Peterhof, had come over to hear details of the bereavement. Clovis was already rather bored with the story, but Mrs. Momeby was equipped with that merciless faculty which finds as much joy in the ninetieth time of telling as in the first.<br />
<br />
“Arnold had just come in; he was complaining of rheumatism—”<br />
<br />
“There are so many things to complain of in this household that it would never have occurred to me to complain of rheumatism,” murmured Clovis.<br />
<br />
“He was complaining of rheumatism,” continued Mrs. Momeby, trying to throw a chilling inflection into a voice that was already doing a good deal of sobbing and talking at high pressure as well.<br />
<br />
She was again interrupted.<br />
<br />
“There is no such thing as rheumatism,” said Miss Gilpet. She said it with the conscious air of defiance that a waiter adopts in announcing that the cheapest-priced claret in the wine-list is no more. She did not proceed, however, to offer the alternative of some more expensive malady, but denied the existence of them all.<br />
<br />
Mrs. Momeby’s temper began to shine out through her grief.<br />
<br />
“I suppose you’ll say next that Baby hasn’t really disappeared.”<br />
<br />
“He has disappeared,” conceded Miss Gilpet, “but only because you haven’t sufficient faith to find him. It’s only lack of faith on your part that prevents him from being restored to you safe and well.”<br />
<br />
“But if he’s been eaten in the meantime by a hyaena and partly digested,” said Clovis, who clung affectionately to his wild beast theory, “surely some ill-effects would be noticeable?”<br />
<br />
Miss Gilpet was rather staggered by this complication of the question.<br />
<br />
“I feel sure that a hyaena has not eaten him,” she said lamely.<br />
<br />
“The hyaena may be equally certain that it has. You see, it may have just as much faith as you have, and more special knowledge as to the present whereabouts of the baby.”<br />
<br />
Mrs. Momeby was in tears again. “If you have faith,” she sobbed, struck by a happy inspiration, “won’t you find our little Erik for us? I am sure you have powers that are denied to us.”<br />
<br />
Rose–Marie Gilpet was thoroughly sincere in her adherence to Christian Science principles; whether she understood or correctly expounded them the learned in such matters may best decide. In the present case she was undoubtedly confronted with a great opportunity, and as she started forth on her vague search she strenuously summoned to her aid every scrap of faith that she possessed. She passed out into the bare and open high road, followed by Mrs. Momeby’s warning, “It’s no use going there, we’ve searched there a dozen times.” But Rose–Marie’s ears were already deaf to all things save self-congratulation; for sitting in the middle of the highway, playing contentedly with the dust and some faded buttercups, was a white-pinafored baby with a mop of tow-coloured hair tied over one temple with a pale-blue ribbon. Taking first the usual feminine precaution of looking to see that no motor-car was on the distant horizon, Rose–Marie dashed at the child and bore it, despite its vigorous opposition, in through the portals of Elsinore. The child’s furious screams had already announced the fact of its discovery, and the almost hysterical parents raced down the lawn to meet their restored offspring. The aesthetic value of the scene was marred in some degree by Rose–Marie’s difficulty in holding the struggling infant, which was borne wrong-end foremost towards the agitated bosom of its family. “Our own little Erik come back to us,” cried the Momebys in unison; as the child had rammed its fists tightly into its eye-sockets and nothing could be seen of its face but a widely gaping mouth, the recognition was in itself almost an act of faith.<br />
<br />
“Is he glad to get back to Daddy and Mummy again?” crooned Mrs. Momeby; the preference which the child was showing for its dust and buttercup distractions was so marked that the question struck Clovis as being unnecessarily tactless.<br />
<br />
“Give him a ride on the roly-poly,” suggested the father brilliantly, as the howls continued with no sign of early abatement. In a moment the child had been placed astride the big garden roller and a preliminary tug was given to set it in motion. From the hollow depths of the cylinder came an earsplitting roar, drowning even the vocal efforts of the squalling baby, and immediately afterwards there crept forth a white-pinafored infant with a mop of tow-coloured hair tied over one temple with a pale blue ribbon. There was no mistaking either the features or the lung-power of the new arrival.<br />
<br />
“Our own little Erik,” screamed Mrs. Momeby, pouncing on him and nearly smothering him with kisses; “did he hide in the roly-poly to give us all a big fright?”<br />
<br />
This was the obvious explanation of the child’s sudden disappearance and equally abrupt discovery. There remained, however, the problem of the interloping baby, which now sat whimpering on the lawn in a disfavour as chilling as its previous popularity had been unwelcome. The Momebys glared at it as though it had wormed its way into their short-lived affections by heartless and unworthy pretences. Miss Gilpet’s face took on an ashen tinge as she stared helplessly at the bunched-up figure that had been such a gladsome sight to her eyes a few moments ago.<br />
<br />
“When love is over, how little of love even the lover understands,” quoted Clovis to himself.<br />
<br />
Rose–Marie was the first to break the silence.<br />
<br />
“If that is Erik you have in your arms, who is—that?”<br />
<br />
“That, I think, is for you to explain,” said Mrs. Momeby stiffly.<br />
<br />
“Obviously,” said Clovis, “it’s a duplicate Erik that your powers of faith called into being. The question is: What are you going to do with him?”<br />
<br />
The ashen pallor deepened in Rose–Marie’s cheeks. Mrs. Momeby clutched the genuine Erik closer to her side, as though she feared that her uncanny neighbour might out of sheer pique turn him into a bowl of gold-fish.<br />
<br />
“I found him sitting in the middle of the road,” said Rose–Marie weakly.<br />
<br />
“You can’t take him back and leave him there,” said Clovis; “the highway is meant for traffic, not to be used as a lumber-room for disused miracles.”<br />
<br />
Rose–Marie wept. The proverb “Weep and you weep alone,” broke down as badly on application as most of its kind. Both babies were wailing lugubriously, and the parent Momebys had scarcely recovered from their earlier lachrymose condition. Clovis alone maintained an unruffled cheerfulness.<br />
<br />
“Must I keep him always?” asked Rose–Marie dolefully.<br />
<br />
“Not always,” said Clovis consolingly; “he can go into the Navy when he’s thirteen.” Rose–Marie wept afresh.<br />
<br />
“Of course,” added Clovis, “there may be no end of a bother about his birth certificate. You’ll have to explain matters to the Admiralty, and they’re dreadfully hidebound.”<br />
<br />
It was rather a relief when a breathless nursemaid from the Villa Charlottenburg over the way came running across the lawn to claim little Percy, who had slipped out of the front gate and disappeared like a twinkling from the high road.<br />
<br />
And even then Clovis found it necessary to go in person to the kitchen to make sure about the asparagus sauce.</div>Stereo//wiki.syn2cat.lu/wiki/User:Stereo/The_QuestUser:Stereo/The Quest2013-05-11T11:07:04Z<p>Stereo: Created page with "== The Quest == <small>''from The Chronicles of Clovis, by Saki''</small> :<big>The hackerspace “is meant for traffic, not to be used as a lumber-room for disused miracles...."</p>
<hr />
<div>== The Quest ==<br />
<small>''from The Chronicles of Clovis, by Saki''</small><br />
<br />
:<big>The hackerspace “is meant for traffic, not to be used as a lumber-room for disused miracles.”</big><br />
<br />
An unwonted peace hung over the Villa Elsinore, broken, however, at frequent intervals, by clamorous lamentations suggestive of bewildered bereavement. The Momebys had lost their infant child; hence the peace which its absence entailed; they were looking for it in wild, undisciplined fashion, giving tongue the whole time, which accounted for the outcry which swept through house and garden whenever they returned to try the home coverts anew. Clovis, who was temporarily and unwillingly a paying guest at the villa, had been dozing in a hammock at the far end of the garden when Mrs. Momeby had broken the news to him.<br />
<br />
“We’ve lost Baby,” she screamed.<br />
<br />
“Do you mean that it’s dead, or stampeded, or that you staked it at cards and lost it that way?” asked Clovis lazily.<br />
<br />
“He was toddling about quite happily on the lawn,” said Mrs. Momeby tearfully, “and Arnold had just come in, and I was asking him what sort of sauce he would like with the asparagus—”<br />
<br />
“I hope he said hollandaise,” interrupted Clovis, with a show of quickened interest, “because if there’s anything I hate—”<br />
<br />
“And all of a sudden I missed Baby,” continued Mrs. Momeby in a shriller tone. “We’ve hunted high and low, in house and garden and outside the gates, and he’s nowhere to be seen.”<br />
<br />
“Is he anywhere to be heard?” asked Clovis; “if not, he must be at least two miles away.”<br />
<br />
“But where? And how?” asked the distracted mother.<br />
<br />
“Perhaps an eagle or a wild beast has carried him off,” suggested Clovis.<br />
<br />
“There aren’t eagles and wild beasts in Surrey,” said Mrs. Momeby, but a note of horror had crept into her voice.<br />
<br />
“They escape now and then from travelling shows. Sometimes I think they let them get loose for the sake of the advertisement. Think what a sensational headline it would make in the local papers: ‘Infant son of prominent Nonconformist devoured by spotted hyaena.’ Your husband isn’t a prominent Nonconformist, but his mother came of Wesleyan stock, and you must allow the newspapers some latitude.”<br />
<br />
“But we should have found his remains,” sobbed Mrs. Momeby.<br />
<br />
“If the hyaena was really hungry and not merely toying with his food there wouldn’t be much in the way of remains. It would be like the small-boy-and-apple story—there ain’t going to be no core.”<br />
<br />
Mrs. Momeby turned away hastily to seek comfort and counsel in some other direction. With the selfish absorption of young motherhood she entirely disregarded Clovis’s obvious anxiety about the asparagus sauce. Before she had gone a yard, however, the click of the side gate caused her to pull up sharp. Miss Gilpet, from the Villa Peterhof, had come over to hear details of the bereavement. Clovis was already rather bored with the story, but Mrs. Momeby was equipped with that merciless faculty which finds as much joy in the ninetieth time of telling as in the first.<br />
<br />
“Arnold had just come in; he was complaining of rheumatism—”<br />
<br />
“There are so many things to complain of in this household that it would never have occurred to me to complain of rheumatism,” murmured Clovis.<br />
<br />
“He was complaining of rheumatism,” continued Mrs. Momeby, trying to throw a chilling inflection into a voice that was already doing a good deal of sobbing and talking at high pressure as well.<br />
<br />
She was again interrupted.<br />
<br />
“There is no such thing as rheumatism,” said Miss Gilpet. She said it with the conscious air of defiance that a waiter adopts in announcing that the cheapest-priced claret in the wine-list is no more. She did not proceed, however, to offer the alternative of some more expensive malady, but denied the existence of them all.<br />
<br />
Mrs. Momeby’s temper began to shine out through her grief.<br />
<br />
“I suppose you’ll say next that Baby hasn’t really disappeared.”<br />
<br />
“He has disappeared,” conceded Miss Gilpet, “but only because you haven’t sufficient faith to find him. It’s only lack of faith on your part that prevents him from being restored to you safe and well.”<br />
<br />
“But if he’s been eaten in the meantime by a hyaena and partly digested,” said Clovis, who clung affectionately to his wild beast theory, “surely some ill-effects would be noticeable?”<br />
<br />
Miss Gilpet was rather staggered by this complication of the question.<br />
<br />
“I feel sure that a hyaena has not eaten him,” she said lamely.<br />
<br />
“The hyaena may be equally certain that it has. You see, it may have just as much faith as you have, and more special knowledge as to the present whereabouts of the baby.”<br />
<br />
Mrs. Momeby was in tears again. “If you have faith,” she sobbed, struck by a happy inspiration, “won’t you find our little Erik for us? I am sure you have powers that are denied to us.”<br />
<br />
Rose–Marie Gilpet was thoroughly sincere in her adherence to Christian Science principles; whether she understood or correctly expounded them the learned in such matters may best decide. In the present case she was undoubtedly confronted with a great opportunity, and as she started forth on her vague search she strenuously summoned to her aid every scrap of faith that she possessed. She passed out into the bare and open high road, followed by Mrs. Momeby’s warning, “It’s no use going there, we’ve searched there a dozen times.” But Rose–Marie’s ears were already deaf to all things save self-congratulation; for sitting in the middle of the highway, playing contentedly with the dust and some faded buttercups, was a white-pinafored baby with a mop of tow-coloured hair tied over one temple with a pale-blue ribbon. Taking first the usual feminine precaution of looking to see that no motor-car was on the distant horizon, Rose–Marie dashed at the child and bore it, despite its vigorous opposition, in through the portals of Elsinore. The child’s furious screams had already announced the fact of its discovery, and the almost hysterical parents raced down the lawn to meet their restored offspring. The aesthetic value of the scene was marred in some degree by Rose–Marie’s difficulty in holding the struggling infant, which was borne wrong-end foremost towards the agitated bosom of its family. “Our own little Erik come back to us,” cried the Momebys in unison; as the child had rammed its fists tightly into its eye-sockets and nothing could be seen of its face but a widely gaping mouth, the recognition was in itself almost an act of faith.<br />
<br />
“Is he glad to get back to Daddy and Mummy again?” crooned Mrs. Momeby; the preference which the child was showing for its dust and buttercup distractions was so marked that the question struck Clovis as being unnecessarily tactless.<br />
<br />
“Give him a ride on the roly-poly,” suggested the father brilliantly, as the howls continued with no sign of early abatement. In a moment the child had been placed astride the big garden roller and a preliminary tug was given to set it in motion. From the hollow depths of the cylinder came an earsplitting roar, drowning even the vocal efforts of the squalling baby, and immediately afterwards there crept forth a white-pinafored infant with a mop of tow-coloured hair tied over one temple with a pale blue ribbon. There was no mistaking either the features or the lung-power of the new arrival.<br />
<br />
“Our own little Erik,” screamed Mrs. Momeby, pouncing on him and nearly smothering him with kisses; “did he hide in the roly-poly to give us all a big fright?”<br />
<br />
This was the obvious explanation of the child’s sudden disappearance and equally abrupt discovery. There remained, however, the problem of the interloping baby, which now sat whimpering on the lawn in a disfavour as chilling as its previous popularity had been unwelcome. The Momebys glared at it as though it had wormed its way into their short-lived affections by heartless and unworthy pretences. Miss Gilpet’s face took on an ashen tinge as she stared helplessly at the bunched-up figure that had been such a gladsome sight to her eyes a few moments ago.<br />
<br />
“When love is over, how little of love even the lover understands,” quoted Clovis to himself.<br />
<br />
Rose–Marie was the first to break the silence.<br />
<br />
“If that is Erik you have in your arms, who is—that?”<br />
<br />
“That, I think, is for you to explain,” said Mrs. Momeby stiffly.<br />
<br />
“Obviously,” said Clovis, “it’s a duplicate Erik that your powers of faith called into being. The question is: What are you going to do with him?”<br />
<br />
The ashen pallor deepened in Rose–Marie’s cheeks. Mrs. Momeby clutched the genuine Erik closer to her side, as though she feared that her uncanny neighbour might out of sheer pique turn him into a bowl of gold-fish.<br />
<br />
“I found him sitting in the middle of the road,” said Rose–Marie weakly.<br />
<br />
“You can’t take him back and leave him there,” said Clovis; “the highway is meant for traffic, not to be used as a lumber-room for disused miracles.”<br />
<br />
Rose–Marie wept. The proverb “Weep and you weep alone,” broke down as badly on application as most of its kind. Both babies were wailing lugubriously, and the parent Momebys had scarcely recovered from their earlier lachrymose condition. Clovis alone maintained an unruffled cheerfulness.<br />
<br />
“Must I keep him always?” asked Rose–Marie dolefully.<br />
<br />
“Not always,” said Clovis consolingly; “he can go into the Navy when he’s thirteen.” Rose–Marie wept afresh.<br />
<br />
“Of course,” added Clovis, “there may be no end of a bother about his birth certificate. You’ll have to explain matters to the Admiralty, and they’re dreadfully hidebound.”<br />
<br />
It was rather a relief when a breathless nursemaid from the Villa Charlottenburg over the way came running across the lawn to claim little Percy, who had slipped out of the front gate and disappeared like a twinkling from the high road.<br />
<br />
And even then Clovis found it necessary to go in person to the kitchen to make sure about the asparagus sauce.</div>Stereo//wiki.syn2cat.lu/wiki/3weekboxes3weekboxes2013-05-03T17:05:52Z<p>Stereo: Created page with "The Three Week Box System helps manage all the stuff that people bring or leave around the hackerspace. They are located at the entrance. Anything that gets left in the space..."</p>
<hr />
<div>The Three Week Box System helps manage all the stuff that people bring or leave around the hackerspace. They are located at the entrance.<br />
<br />
Anything that gets left in the space (or new things that get brought in) gets put into the three week box. Each week the box are rotated and week 1 box contents get thrown out.</div>Stereo//wiki.syn2cat.lu/wiki/Bootstrap_2013-04Bootstrap 2013-042013-05-03T16:29:59Z<p>Stereo: </p>
<hr />
<div>{{Event<br />
|eventtype=Meeting<br />
|subtitle=The syn<sub>2</sub>cat plenum<br />
|description=Decide where syn<sub>2</sub>cat is heading next. Every third Saturday of a month, starting at 7pm until midnight.<br />
|contact=Gunstick, Muling, Nick17, NPU, sid, Stereo<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/04/20 19:00<br />
|till=2013/04/20 23:30<br />
|location=Hackerspace, Strassen<br />
|logo=Bootstraps.gif<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
__NOTOC__<br />
<br />
= Introduction =<br />
<br />
If you would like to discuss something, simply add it below the upcoming event!<br />
<br />
The [[Guidelines]] page regroups all major decisions taken at prior Bootstrap Meetings.<br />
<br />
; Etiquette<br />
* '''No items can be added to a schedule once the meeting has begun.'''<br />
* '''A meeting can't last any longer than 4 hours (a 30min pause will be made after 2h)'''<br />
* '''People should sign the topics they added using <nowiki>~~~</nowiki>.'''<br />
* '''Topics will only be discussed if their authors are present at the meeting.'''<br />
<br />
= Topics =<br />
<!-- add below here --><br />
<br />
<br />
= Minutes =<br />
<!-- to fill out after meeting --><br />
<br />
There being no issues to deal with on the agenda, this bootstrap meeting did not take place.</div>Stereo//wiki.syn2cat.lu/wiki/UltimakerUltimaker2013-04-24T19:52:18Z<p>Stereo: /* Paint gallery: */</p>
<hr />
<div>== Usage ==<br />
[[File:Ultimaker-syn2cat.jpg|320px|right]]<br />
=== How to print things ===<br />
* Download or create something. That's coming as an STL file<br />
* power on the ultimaker (switch on, plug in usb)<br />
* Start the cura software<br />
* load object<br />
* click "prepare print"<br />
* click "print"<br />
<br />
Interesting changes in the "full settings" mode<br />
* fill density: to make really light objects or really heavy and stable ones.<br />
* print speed: current trial which works is 80<br />
* printing temperature: 210 is still fine<br />
* raft: only if you have a very narrow but tall object<br />
* skirt: sometimes one round is not enough, so put 2<br />
<br />
* expert menu<br />
** fan speed min: 20<br />
** bridge speed: 150 (can help to get overhang more straight)<br />
** retrace on jumps only: if print is not nice but contains lots of jumps, try to disable this<br />
** enable hop: this can help but slows priting down a lottle<br />
<br />
=== When working with the Ultimaker, pay attention to the following things: ===<br />
* When printing small objects and objects with a very small base, ''don't print on a raft'', especially for PLA. Rafts are just a waste of plastic with a well-calibrated Z axis. Gunstick's Raft Exception™ is narrow but tall objects that can easily be kicked over; a raft can make them more stable. Newer Cura versions even have an experimental option to avoid kicking the object by moving the platform down.<br />
* Be careful not to lower or raise the bed by bumping into it. The Z axis has been carefully calibrated. Verify that there is no space between the screws and the top of the bed. But don't turn the screws!<br />
* Clean the head and bed with isopropyl alcohol before you start. If you want to be extra nice, clean the bed when you're done.<br />
* If the extrusion head doesn't heat, flick the switch next to the USB port. If you hear the ventilation, then it's on!<br />
* After preparing the print, press "Print" in the main window (the one with the 3D Model) and wait for the second Cura window to pop up. If you can't see it, look for it. Check that the Windows is called after the file you want to print. When printing several files in a row, always be sure to close the second smaller Cura window before printing the next item or you will print the first item again (check window title).<br />
* Sometimes the plastic won't stick to the surface. Cancel the print and use the controller (little box hanging on the machine) to return the extrusion head to "Auto Home". To do this, navigate (using push and scroll on the wheel) into the Menu->Prepare->Auto Home. To make it work, the plastic has to stick to the surface before it makes the skirt outline, or it will only start to stick at a random moment before or during the skirt, with a high risk of leaving a small drop of extra plastic. Try cleaning the bed with alcohol. If that fails, try helping the plastic filament down on the bed when the head initially lowers, or re-taping the bed. But this probably means the Z axis is de-calibrated. You can also change the parameter to do 2 or 3 skirt outlines.<br />
*Don't forget to take the object off the platform before printing the next one. Doh! In case you do forget, the emergency off is the power switch.<br />
*Put scrap plastic into the container glass. Maybe one day it will be possible to recycle.<br />
<br />
=== Does it cost something? ===<br />
You can configure the printing cost directly into Cura. After prepare print, the approximate weight and length of plastic is calculated and there you can then see the cost. To configure:<br />
* File -> Preferences<br />
* price/kg: 50<br />
* price/m: 0.5<br />
You don't need to pay if the print is only for some cents. Just when getting into massive amounts (some euros) it would be cool to donate a bit. There is a piggybank (Sparschwein) at the soldering table.<br />
<br />
=== how to on linux ===<br />
It is preferable to have your own setup on your own machine, or maybe on a dedicated account on a syn2cat computer. So you can have your own settings and don't need to fiddle around with the cura profiles which then get messed up by the next user.<br />
==== sketchup ====<br />
Only working on intel/amd as it's a windows program. If you have windows, just use windows!<br />
(I know there is 3D software for linux, but I'm lost in how to use that)<br />
* apt-get install wine<br />
* download sketchup http://www.sketchup.com/intl/en/download/gsu.html<br />
* wine sketchupwen.exe<br />
* run it: wine '~/.wine/drive_C/Program Files (x86)/Google/Sketchup/Sketchup.exe'<br />
* consult this http://wiki.winehq.org/GoogleSketchup (you need probably that registry: "wine regedit")<br />
* add module for STL export http://www.guitar-list.com/download-software/convert-sketchup-skp-files-dxf-or-stl chose the *rbz file)<br />
* draw object in millimeters<br />
* export in millimeters<br />
<br />
==== Cura ====<br />
* instructions http://wiki.ultimaker.com/Cura<br />
* it's kinda working http://wiki.ultimaker.com/Installing_Cura_on_Linux (you need to do that pypy thing if you're 64 bit)<br />
* If you are unable to print (clicking on the print button does not manifest a window), you can prepare print and write your gcode file to the SD card<br />
* To make the print button work, set this environment<br />
<pre><br />
export PYTHONPATH="$PYTHONPATH":/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/<br />
</pre><br />
<br />
==== printing from SD card ====<br />
* switch ultimaker on<br />
* unplug the USB cable !!! (else it will not print)<br />
* navigate to card menu<br />
* select file<br />
* printer heats up, and prints the object<br />
<br />
== Tasks ==<br />
<br />
=== TODO (more or less in that order): ===<br />
* [http://www.thingiverse.com/thing:40041 Spring-loaded NEMA 17 steppers / belt tensioner]<br />
* [http://www.thingiverse.com/thing:25950 Ulti-Foot]<br />
* [http://www.thingiverse.com/thing:29469 Handle]<br />
* [http://www.thingiverse.com/thing:21184 Printhead cover]<br />
* [http://www.thingiverse.com/thing:25436 Locking key for Ultimaker filament feeder]<br />
* [http://www.thingiverse.com/thing:40583 Ikea Dioder LED strip on Ultimaker]<br />
* Collection of [http://www.thingiverse.com/thing:39973 tools]<br />
* Some kind of [http://www.thingiverse.com/thing:18098 Tool thing] or awesome [http://www.thingiverse.com/thing:41661 laser-cut Ultimaker Tool Holder]<br />
* [http://www.thingiverse.com/thing:22719 UltiController Clamp]<br />
* [https://www.youtube.com/watch?v=v8f_mmFUyug Get PLA to stick to your Printrbot build platform with Hairspray or ABS juice]<br />
<br />
See also http://wiki.ultimaker.com/Calibrate<br />
<br />
=== DONE: ===<br />
* [http://www.thingiverse.com/thing:32044 curious llama belt tensioner]<br />
* [http://www.thingiverse.com/thing:32372 Ultimaker: Z-axis end-switch fine-adjuster, Switch mount (or some variation of that idea)]<br />
* [https://www.youtube.com/watch?v=LkkuDQO9OsU Ultimaker Z axis calibration]<br />
* [http://forum.ultimaker.com/viewtopic.php?t=161 Re-greased fan to reduce noise] (which wasn't very successful)<br />
* [http://www.thingiverse.com/thing:33286 Ulticontroller rotary dial]<br />
<br />
== Some links on the ''Spaweck'': ==<br />
* [https://shop.ultimaker.com/en/ultimaker-kit-new.html kit at 1214 EUR] + VAT + shipping<br />
* [http://davedurant.wordpress.com/2011/10/12/ultimaker-faq-but-what-about-the-quality-of-prints/ Ultimaker FAQ: but what about the quality of prints]<br />
* [http://wiki.ultimaker.com/Main_Page Ultimaker Wiki] with [http://wiki.ultimaker.com/Ultimaker_specs_and_features specs and features] and a [http://wiki.ultimaker.com/Frequently_asked_Questions FAQ]<br />
* [http://reprap.org/wiki/Ultimaker Reprap wiki on the Ultimaker]<br />
* [http://wiki.meta-concepts.com/display/UM/Home This is the home of my modified Ultimaker 3D Printer]<br />
* [http://wiki.ultimaker.com/No_strings_attached No strings attached]<br />
* [http://techwall.net/analyzing-your-first-print Analyzing your first print]<br />
<br />
== Paint gallery: ==<br />
* [http://umforum.ultimaker.com/index.php?/gallery/album/7-my-ultimaker/ Cool blue paint job]<br />
* [http://instagram.com/p/TYwjVQn7Fo/ Cool black paint job]</div>Stereo//wiki.syn2cat.lu/wiki/MuscleHackingMuscleHacking2013-04-23T15:12:02Z<p>Stereo: weather</p>
<hr />
<div>{{Event<br />
|attendees=Gunstick, Stereo<br />
|eventtype=Event<br />
|subtitle=yoga for hackers<br />
|description=After the first experience at haxogreen, let's do it this time outside in a parc. The weather is announced to be nice and warm, which is rare. If the map would work, it indicates the exact location in the park.<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/04/24 18:00<br />
|till=2013/04/24 20:00<br />
|location=Parc Merl<br />
|logo=YogaFreshAir.JPG<br />
|announce=no<br />
|cost=0 EUR<br />
|url=http://www.haxogreen.lu/schedule/2012/events/17.en.html<br />
|u19=no<br />
}}<br />
Bring a towel and exercise mat, or just use the grass... Exercise mats are available in syn2stock. Also some warm training clothes if it gets colder than expected.<br />
<br />
[http://weatherspark.com/#!dashboard;q=Luxembourg%20City%2C%20Luxembourg Weather forecast for Luxembourg]</div>Stereo//wiki.syn2cat.lu/wiki/MuscleHackingMuscleHacking2013-04-23T15:10:54Z<p>Stereo: Edited automatically from page MuscleHacking.</p>
<hr />
<div>{{Event<br />
|attendees=Gunstick, Stereo<br />
|eventtype=Event<br />
|subtitle=yoga for hackers<br />
|description=After the first experience at haxogreen, let's do it this time outside in a parc. The weather is announced to be nice and warm, which is rare. If the map would work, it indicates the exact location in the park.<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/04/24 18:00<br />
|till=2013/04/24 20:00<br />
|location=Parc Merl<br />
|logo=YogaFreshAir.JPG<br />
|announce=no<br />
|cost=0 EUR<br />
|url=http://www.haxogreen.lu/schedule/2012/events/17.en.html<br />
|u19=no<br />
}}<br />
Bring a towel and exercise mat, or just use the grass... Exercise mats are available in syn2stock. Also some warm training clothes if it gets colder than expected.</div>Stereo//wiki.syn2cat.lu/wiki/FridgeFridge2013-04-09T20:05:39Z<p>Stereo: </p>
<hr />
<div>The rules for the fridge<br />
<br />
:{{#qrcode:size=4 |label=http://www.hackerspace.lu/wiki/Fridge}}<br />
<br />
We have 2 fridges.<br />
<br />
* Please keep the fridge tidy.<br />
* If there is a spill, clean it up, even if it isn’t your fault.<br />
<br />
==Drinks Fridge==<br />
<br />
* Always refill the fridge: new drinks left, cold drinks right.<br />
** This way the next hacker does not have to guess which bottles are cold.<br />
** If you want bonus points, put the new bottles at the back.<br />
* Store empty bottles in the crates underneath the bar.<br />
** If a crate is full, take an empty one to replace it.<br />
** If there is no empty one, then there should be enough free space in the fridge to create an empty one.<br />
<br />
==Food Fridge==<br />
<br />
* All items in this fridge must have a name and expiry date written on them. Use the [[Media:Food-labels.pdf|labels]] provided.<br />
** To print the stickers use "borderless printing" and the 3x8 stickers A4 sheets.<br />
** If you're not able to print stickers, simply put a post-it on it with your nickname and mark if it's private or not<br />
* If you open something, write the opening date on the sticker.<br />
* Items that are expired or not labeled may be thrown away or eaten.<br />
<br />
==Freezer==<br />
<br />
* It's the bottom part of the food fridge. You can find the ice cream there.<br />
* The freezer is for stuff which can be frozen, don´t put bottles in there just to cool them. You *will* forget about them and end up with a bunch of glass shreds.<br />
* Your own items should also be labeled, at least indicate if it´s for you or for everyone.</div>Stereo//wiki.syn2cat.lu/wiki/FridgeFridge2013-04-06T23:12:39Z<p>Stereo: /* Food Fridge */</p>
<hr />
<div>The rules for the fridge<br />
<br />
:{{#qrcode:size=4 |label=http://www.hackerspace.lu/wiki/Fridge}}<br />
<br />
We have 2 fridges.<br />
<br />
==Drinks Fridge==<br />
<br />
* After taking out a drink or emptying a juice bottle put back a new one from the crates. Put it in the back row so that the next hacker does not have to guess which ones are cold.<br />
* Put your empty bottles into the crates on the right of the fridge. If a crate is full, take an empty one to replace it. If there is no empty one, then there should be enough free space in the fridge to create an empty one.<br />
<br />
==Food Fridge==<br />
<br />
* Please keep the fridge tidy.<br />
* If there is a spill, clean it up, even if it isn’t your fault.<br />
* All items in this fridge must have a name and expiry date written on them. Use the [[Media:Food-labels.pdf|labels]] provided.<br />
** To print the stickers use "borderless printing" and the 3x8 stickers A4 sheets.<br />
** If you're not able to print stickers, simply put a post-it on it with your nickname and mark if it's private or not<br />
* If you open something, write the opening date on the sticker.<br />
* Items that are expired or not labeled may be thrown away or eaten.<br />
<br />
==Freezer==<br />
<br />
* It's the bottom part of the food fridge. You can find the ice cream there.<br />
* The freezer is for stuff which can be frozen, don´t put bottles in there just to cool them. You *will* forget about them and end up with a bunch of glass shreds.<br />
* Your own items should also be labeled, at least indicate if it´s for you or for everyone.</div>Stereo//wiki.syn2cat.lu/wiki/UltimakerUltimaker2013-03-24T11:19:19Z<p>Stereo: /* TODO (more or less in that order): */ Get PLA to stick to your Printrbot build platform with Hairspray or ABS juice</p>
<hr />
<div>== Usage ==<br />
[[File:Ultimaker-syn2cat.jpg|320px|right]]<br />
=== How to print things ===<br />
* Download or create something. That's coming as an STL file<br />
* power on the ultimaker (switch on, plug in usb)<br />
* Start the cura software<br />
* load object<br />
* click "prepare print"<br />
* click "print"<br />
<br />
Interesting changes in the "full settings" mode<br />
* fill density: to make really light objects or really heavy and stable ones.<br />
* print speed: current trial which works is 80<br />
* printing temperature: 210 is still fine<br />
* raft: only if you have a very narrow but tall object<br />
* skirt: sometimes one round is not enough, so put 2<br />
<br />
* expert menu<br />
** fan speed min: 20<br />
** bridge speed: 150 (can help to get overhang more straight)<br />
** retrace on jumps only: if print is not nice but contains lots of jumps, try to disable this<br />
** enable hop: this can help but slows priting down a lottle<br />
<br />
=== When working with the Ultimaker, pay attention to the following things: ===<br />
* When printing small objects and objects with a very small base, ''don't print on a raft'', especially for PLA. Rafts are just a waste of plastic with a well-calibrated Z axis. Gunstick's Raft Exception™ is narrow but tall objects that can easily be kicked over; a raft can make them more stable. Newer Cura versions even have an experimental option to avoid kicking the object by moving the platform down.<br />
* Be careful not to lower or raise the bed by bumping into it. The Z axis has been carefully calibrated. Verify that there is no space between the screws and the top of the bed. But don't turn the screws!<br />
* Clean the head and bed with isopropyl alcohol before you start. If you want to be extra nice, clean the bed when you're done.<br />
* If the extrusion head doesn't heat, flick the switch next to the USB port. If you hear the ventilation, then it's on!<br />
* After preparing the print, press "Print" in the main window (the one with the 3D Model) and wait for the second Cura window to pop up. If you can't see it, look for it. Check that the Windows is called after the file you want to print. When printing several files in a row, always be sure to close the second smaller Cura window before printing the next item or you will print the first item again (check window title).<br />
* Sometimes the plastic won't stick to the surface. Cancel the print and use the controller (little box hanging on the machine) to return the extrusion head to "Auto Home". To do this, navigate (using push and scroll on the wheel) into the Menu->Prepare->Auto Home. To make it work, the plastic has to stick to the surface before it makes the skirt outline, or it will only start to stick at a random moment before or during the skirt, with a high risk of leaving a small drop of extra plastic. Try cleaning the bed with alcohol. If that fails, try helping the plastic filament down on the bed when the head initially lowers, or re-taping the bed. But this probably means the Z axis is de-calibrated. You can also change the parameter to do 2 or 3 skirt outlines.<br />
*Don't forget to take the object off the platform before printing the next one. Doh! In case you do forget, the emergency off is the power switch.<br />
*Put scrap plastic into the container glass. Maybe one day it will be possible to recycle.<br />
<br />
=== Does it cost something? ===<br />
You can configure the printing cost directly into Cura. After prepare print, the approximate weight and length of plastic is calculated and there you can then see the cost. To configure:<br />
* File -> Preferences<br />
* price/kg: 50<br />
* price/m: 0.5<br />
You don't need to pay if the print is only for some cents. Just when getting into massive amounts (some euros) it would be cool to donate a bit. There is a piggybank (Sparschwein) at the soldering table.<br />
<br />
=== how to on linux ===<br />
It is preferable to have your own setup on your own machine, or maybe on a dedicated account on a syn2cat computer. So you can have your own settings and don't need to fiddle around with the cura profiles which then get messed up by the next user.<br />
==== sketchup ====<br />
Only working on intel/amd as it's a windows program. If you have windows, just use windows!<br />
(I know there is 3D software for linux, but I'm lost in how to use that)<br />
* apt-get install wine<br />
* download sketchup http://www.sketchup.com/intl/en/download/gsu.html<br />
* wine sketchupwen.exe<br />
* run it: wine '~/.wine/drive_C/Program Files (x86)/Google/Sketchup/Sketchup.exe'<br />
* consult this http://wiki.winehq.org/GoogleSketchup (you need probably that registry: "wine regedit")<br />
* add module for STL export http://www.guitar-list.com/download-software/convert-sketchup-skp-files-dxf-or-stl chose the *rbz file)<br />
* draw object in millimeters<br />
* export in millimeters<br />
<br />
==== Cura ====<br />
* instructions http://wiki.ultimaker.com/Cura<br />
* it's kinda working http://wiki.ultimaker.com/Installing_Cura_on_Linux (you need to do that pypy thing if you're 64 bit)<br />
* If you are unable to print (clicking on the print button does not manifest a window), you can prepare print and write your gcode file to the SD card<br />
* To make the print button work, set this environment<br />
<pre><br />
export PYTHONPATH="$PYTHONPATH":/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/<br />
</pre><br />
<br />
==== printing from SD card ====<br />
* switch ultimaker on<br />
* unplug the USB cable !!! (else it will not print)<br />
* navigate to card menu<br />
* select file<br />
* printer heats up, and prints the object<br />
<br />
== Tasks ==<br />
<br />
=== TODO (more or less in that order): ===<br />
* [http://www.thingiverse.com/thing:40041 Spring-loaded NEMA 17 steppers / belt tensioner]<br />
* [http://www.thingiverse.com/thing:25950 Ulti-Foot]<br />
* [http://www.thingiverse.com/thing:29469 Handle]<br />
* [http://www.thingiverse.com/thing:21184 Printhead cover]<br />
* [http://www.thingiverse.com/thing:25436 Locking key for Ultimaker filament feeder]<br />
* [http://www.thingiverse.com/thing:40583 Ikea Dioder LED strip on Ultimaker]<br />
* Collection of [http://www.thingiverse.com/thing:39973 tools]<br />
* Some kind of [http://www.thingiverse.com/thing:18098 Tool thing] or awesome [http://www.thingiverse.com/thing:41661 laser-cut Ultimaker Tool Holder]<br />
* [http://www.thingiverse.com/thing:22719 UltiController Clamp]<br />
* [https://www.youtube.com/watch?v=v8f_mmFUyug Get PLA to stick to your Printrbot build platform with Hairspray or ABS juice]<br />
<br />
See also http://wiki.ultimaker.com/Calibrate<br />
<br />
=== DONE: ===<br />
* [http://www.thingiverse.com/thing:32044 curious llama belt tensioner]<br />
* [http://www.thingiverse.com/thing:32372 Ultimaker: Z-axis end-switch fine-adjuster, Switch mount (or some variation of that idea)]<br />
* [https://www.youtube.com/watch?v=LkkuDQO9OsU Ultimaker Z axis calibration]<br />
* [http://forum.ultimaker.com/viewtopic.php?t=161 Re-greased fan to reduce noise] (which wasn't very successful)<br />
* [http://www.thingiverse.com/thing:33286 Ulticontroller rotary dial]<br />
<br />
== Some links on the ''Spaweck'': ==<br />
* [https://shop.ultimaker.com/en/ultimaker-kit-new.html kit at 1214 EUR] + VAT + shipping<br />
* [http://davedurant.wordpress.com/2011/10/12/ultimaker-faq-but-what-about-the-quality-of-prints/ Ultimaker FAQ: but what about the quality of prints]<br />
* [http://wiki.ultimaker.com/Main_Page Ultimaker Wiki] with [http://wiki.ultimaker.com/Ultimaker_specs_and_features specs and features] and a [http://wiki.ultimaker.com/Frequently_asked_Questions FAQ]<br />
* [http://reprap.org/wiki/Ultimaker Reprap wiki on the Ultimaker]<br />
* [http://wiki.meta-concepts.com/display/UM/Home This is the home of my modified Ultimaker 3D Printer]<br />
* [http://wiki.ultimaker.com/No_strings_attached No strings attached]<br />
* [http://techwall.net/analyzing-your-first-print Analyzing your first print]<br />
<br />
== Paint gallery: ==<br />
* [http://farm9.staticflickr.com/8295/7898763184_a6f995c936_k.jpg Cool blue paint job 1] [http://farm9.staticflickr.com/8029/7898763630_c9a3862926_k.jpg 2]<br />
* [http://instagram.com/p/TYwjVQn7Fo/ Cool black paint job]</div>Stereo//wiki.syn2cat.lu/wiki/General_Assembly_March_2013General Assembly March 20132013-03-15T23:43:48Z<p>Stereo: /* Vote delegations */</p>
<hr />
<div>{{Event<br />
|attendees=Trefex, Sid, Gunstick, Muling, Kubark42, Steve, Mullebutz, Sim0n, Tatianasan, Nick17, Kwisatz, Stereo, Trefex<br />
|eventtype=Event<br />
|subtitle=General Assembly March 213<br />
|description=It's just half a year since the extraordinary general assembly and here we go again for an new regular General Assembly (GA).<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/03/16 18:00<br />
|till=2013/03/16 20:00<br />
|location=Hackerspace, Strassen<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
==Introduction==<br />
The date was proposed on [[Bootstrap_2013-01]] and mentioned in mails the 21st January and 14th February.<br />
The official invitation will be sent out soon.<br />
A preliminary agenda was formulated by office on the meeting of 9th February.<br />
<br />
==Preparations==<br />
Some items need to be done before the assembly<br />
<br />
* audit of accounts (16/02/2013) DONE<br />
* prepare voting sheets and result sheets<br />
* before opening assembly verify quorum (50%)<br />
* candidates have to do their candidature before start of GA<br />
* secure a room<br />
<br />
==Agenda==<br />
this can be modified until 1st march 2013<br />
*decide on voting board<br />
*approve agenda<br />
*activity report 2012<br />
*Presentation of 2012's receipts and expenditures<br />
*Discharge of the treasurer by our auditors<br />
*discharge of office<br />
*Presentation of new activities 2013<br />
*Election of a new administrative council<br />
*Election of a new treasurer<br />
*Election of president and vice president<br />
*Call for two financial auditors for 2013<br />
<br />
=== Candidates ===<br />
To be candidate, you have to send an email to office@hackerspace.lu indicating if you want to be President, Vice-President, Treasurer or office member.<br />
<br />
{| class="wikitable" border="1"<br />
|-<br />
! who !! post !! email date <br />
|-<br />
| Gunstick || President || Tue, 26 Feb 2013 20:11:40 +0100<br />
|-<br />
| sid || Treasurer || Tue, 26 Feb 2013 21:56:55 +0100<br />
|-<br />
| Stereo || Vice President || Wed, 27 Feb 2013 15:22:13 +0100<br />
|-<br />
|}<br />
<br />
=== Vote delegations ===<br />
Remember: do not announce delegations to people already listed below: they either are not coming or already have a delegation. First ask personally the delegate if s/he accepts.<br/><br />
Your proxy '''must''' bring a valid proof of delegation to the GA or you have to send a PGP signed email to office@hackerspace.lu<br />
{| class="wikitable" border="1"<br />
|-<br />
! member's pseudo !! vote delegated to !! verified via<br />
|-<br />
| thierry || kwisatz || signed piece of paper (the office has this, muling, sid and gunstick saw it!)<br />
|-<br />
| Kenn || Stereo || signed piece of paper with funky signature<br />
|-<br />
| Bartek || Gunstick || PGP signed email<br />
<!--<br />
| slopjong || Gunstick || PGP<br />
--><br />
|}<br />
<br />
<!--<br />
Thus members (virtually) present: '''0'''<br/><br />
Members required:<br />
--></div>Stereo//wiki.syn2cat.lu/wiki/General_Assembly_March_2013General Assembly March 20132013-03-15T15:40:00Z<p>Stereo: /* Vote delegations */</p>
<hr />
<div>{{Event<br />
|attendees=Trefex, Sid, Gunstick, Muling, Kubark42, Steve, Mullebutz, Sim0n, Tatianasan, Nick17, Kwisatz, Stereo, Trefex<br />
|eventtype=Event<br />
|subtitle=General Assembly March 213<br />
|description=It's just half a year since the extraordinary general assembly and here we go again for an new regular General Assembly (GA).<br />
|contact=Gunstick,<br />
|organizer=syn2cat<br />
|recurring=no<br />
|from=2013/03/16 18:00<br />
|till=2013/03/16 20:00<br />
|location=Hackerspace, Strassen<br />
|announce=no<br />
|cost=0 EUR<br />
|u19=no<br />
}}<br />
==Introduction==<br />
The date was proposed on [[Bootstrap_2013-01]] and mentioned in mails the 21st January and 14th February.<br />
The official invitation will be sent out soon.<br />
A preliminary agenda was formulated by office on the meeting of 9th February.<br />
<br />
==Preparations==<br />
Some items need to be done before the assembly<br />
<br />
* audit of accounts (16/02/2013) DONE<br />
* prepare voting sheets and result sheets<br />
* before opening assembly verify quorum (50%)<br />
* candidates have to do their candidature before start of GA<br />
* secure a room<br />
<br />
==Agenda==<br />
this can be modified until 1st march 2013<br />
*decide on voting board<br />
*approve agenda<br />
*activity report 2012<br />
*Presentation of 2012's receipts and expenditures<br />
*Discharge of the treasurer by our auditors<br />
*discharge of office<br />
*Presentation of new activities 2013<br />
*Election of a new administrative council<br />
*Election of a new treasurer<br />
*Election of president and vice president<br />
*Call for two financial auditors for 2013<br />
<br />
=== Candidates ===<br />
To be candidate, you have to send an email to office@hackerspace.lu indicating if you want to be President, Vice-President, Treasurer or office member.<br />
<br />
{| class="wikitable" border="1"<br />
|-<br />
! who !! post !! email date <br />
|-<br />
| Gunstick || President || Tue, 26 Feb 2013 20:11:40 +0100<br />
|-<br />
| sid || Treasurer || Tue, 26 Feb 2013 21:56:55 +0100<br />
|-<br />
| Stereo || Vice President || Wed, 27 Feb 2013 15:22:13 +0100<br />
|-<br />
|}<br />
<br />
=== Vote delegations ===<br />
Remember: do not announce delegations to people already listed below: they either are not coming or already have a delegation. First ask personally the delegate if s/he accepts.<br/><br />
Your proxy '''must''' bring a valid proof of delegation to the GA or you have to send a PGP signed email to office@hackerspace.lu<br />
{| class="wikitable" border="1"<br />
|-<br />
! member's pseudo !! vote delegated to !! verified via<br />
|-<br />
| thierry || kwisatz || signed piece of paper (the office has this, muling, sid and gunstick saw it!)<br />
|-<br />
| Kenn || Stereo || signed piece of paper with funky signature<br />
<!--<br />
| slopjong || Gunstick || PGP<br />
--><br />
|}<br />
<br />
<!--<br />
Thus members (virtually) present: '''0'''<br/><br />
Members required:<br />
--></div>Stereo