Bootstrap Meeting

From syn2cat -
Revision as of 15:42, 2 April 2011 by Bartek (Talk | contribs)

Jump to: navigation, search
Note: this article is about a passed event.
Add your Event
Bootstrap Meeting
Type of Event: Meeting
From: 2010/03/06 07:00:00 PM
Till: 2012/03/03 11:59:00 PM
Recurring: dayofweekinmonth
Cost: 0 EUR0 $
0 £
Mandatory registration:

Attendees: All members
Log-in to RSVP
Contact Person(s): Kwisatz (mail), Gunstick (mail), SteveClement (mail), Mich (mail), Macfreak109 (mail)
Where: Hackerspace, Strassen (11, rue du Cimetière, L-8018 Strassen, Luxembourg)
Loading map...
QrCode: QR-b34d70b8e3633726567664cb25d2970e.png
Add to your calendar: Download … further results
Alternate picture: None
Announce globally: no


If you would like to discuss something, simply add it below the upcoming event!

The Guidelines page regroups all major decisions taken at prior Bootstrap Meetings.

As a courtesy to the people attending, please refrain from adding items less than 12 hours before a meeting.

April 2nd


  • Faccat and Spila merger evaluation
  • Donation policy: A member who brings something to the space MUST take the time to find a safe and out of the way place for it.
  • Acquire a ultra sonic cutter. This tool could be used for plastic cutting. You can see demo video here (Kris)

March 12th

Attention: This bootstrap meeting is on the second Saturday of the month for a change because we hold our General Assembly on the 1st.


  • Working Group progress reports and group switching (if any)
  • Opinion gathering about merging faccat and spila
  • Introducing the FreeSpace project
  • Hack in the Box Amsterdam Attendance
  • Upcoming workshops (Soldering and Cocktail)
    • slopjong: dunno if you mean my soldering workshop. If so the voice changer is soldered which sounds like this. The robot voice is understable if a microphone is used as the input instead of the line-out of my macb00k
  • Science Festival 2011
  • CleanSpace Days


Meeting start at 19:15

  • Working Group progress reports and group switching (if any)
    • Pubrel
      • several members work on a grafical charta so we can have a corporate identity. There will be no requirements to members to use a specific email signature
      • facebook group or page? Decision taken to keep both, but itnation and zap will be dropped.
      • who reads space status (open close) via twitter. Seems everyone just consults the main website. So either remove those updates altogether or create a dedicated twitter account so that the syn2cat twitte page gets less cluttered and more interesting to follow. Additional idea is to improve the status page to show a short history of the last changes and maybe finally create occupational statistics.
      • the new free twitter like service itenti,ca will not be used as the users are mainly geeks and ners who know anyway about hackerspaces
      • idea to create a yearly PDF based newsletter
      • spreadshirt: trial of the premium membership (60€). Should we only show the recent designs? Decision to have old designs in the shop but only on later pages. Personal designs should go on your own spreadshirt shop.
      • there will be generic business cars without individual names created. People can get personalized ones if they pay for them. Other possibility is to have A4 sheets with the cards pre-printed which can be personalized by anyone, either by printing or simply handwriting the name or alias.
      • Keep the GRL brand? Yes. It's a label for street art. Put link to linux software on the site.
      • Blog: it's possible to write your own posts. But please finish your posts ASAP. There are many unfinished ones on the site.
    • Evdev
      • no meeting yet
      • please remember the ubuntu release party
      • what is the group about: not really to create events but more supporting you in creating your events
    • sysops
      • wordpress has been updated
      • openduino2 is a standalone project
    • camp orga
      • the contract with dudelange scouts has to be signed
    • office
      • a suggestion was made that the council should be more open towards members what's going on
      • internal office meeting is scheduled for this month
    • faccat
      • from now on please put small bags into the trashcans in the lab room, else they become very dirty
      • one cupboard will be fitted with wheels so the stock will be easier to access
      • mate order will be made next monday. Personal crates (25€+5€ deposit) can be made until sunday night
      • anyone having trays to make ice cubes, please bring them, so we have ice for Kenn's coctail workshop
    • infrastructure
      • some new books have arrived. This could be tweeted. Using the rss feed from librarything is the easiest way.
  • Opinion gathering about merging faccat and spila
    • 2 of 3 members in faccat are favorable to the merging, in spila nobody did oppose the idea.
    • one advantage is that the 2 budgets of faccat and 1 from spila can be merges into 2 budgets. Less admin time, more hacker time.
    • it's possible to tranfer faccat tickets in redmine into spila
    • trial period until next bootstrap or the one after
  • Introducing the FreeSpace project
    • something like Die Bäckerei in austria
    • 500m2
    • not commercial, so nothing like carree rotondes. It will be an autonomous structure
    • shall syn2cat be part of it? there are 3 possibilities
      • not participate
      • use some working rooms for our use
      • move completely there into our own dedicated rooms
    • is syn2cat behind this, supporting the idea? Yes
    • everyone should have a look at Die Bäckerei to have an idea what it's about
  • Hack in the Box Amsterdam Attendance
    • this is a business conference with a high entry fee which is held from 17 until 20 May
    • participating in the hacker challenge can get 2 syn2cat members free access
    • who of our members is interested? Ask on mailinglist for people
  • Upcoming workshops (Soldering and Cocktail)
    • slopjong: dunno if you mean my soldering workshop. If so the voice changer is soldered which sounds like this. The robot voice is understable if a microphone is used as the input instead of the line-out of my macb00k
    • please sign up for the workshops!!!
    • ice cube trays needed several days before next saturday!
    • Kenn needs some helping hands to move the coctail stuff to the space
  • Science Festival 2011
    • the project got approved including budget for parts and remuneration for people running the workshops
    • purpose: do science workshops to teach kids. On 2 days the classes with teacher will visit the workshop to experiment with logic gates using legos
    • a big calculator using the same logic gate principles will be built by syn2cat to be put up at the festival
    • there will be around 6 people needed to build the half adders via a small mass production chain
    • Currently Jhemp and Gunstick are in charge of the project
  • CleanSpace Days
    • there has to be a cleaning day once a month
    • rule which was accepted by everyone: each member has to participate at least in 4 cleaning days per year

Meeting finished at 20:45

  • Green Rack (after meeting presentation)
    • Gunstick presents his idea of bio-mod the syn2cat way.
    • The main purpose is to have a daylight visible sign to make people aware where the hackerspace is
    • Instead of enclosing running comupters and plants in an autonomous system, this idea will be more into the theme of nature taking over technology
    • the unused rack in the lab room will be used, including computer hardware. The servers will be plant pots where flowers and other green stuff grows.
    • must take contact with donators of the various hardware in that rack if they are OK to trash that (and transform into plant pots)
    • anyone interested in doing this?

February 5th


  • Funding for the Syn2rbine project
  • Sushi Workshop debriefing, and discussion of non-member participation.
  • Hx² and the CCCamp 2011
  • The HacKids project (and the future role of the hackerspace in (fundamental) schools RFC)
  • Poll: who finds the "Repage" script useful? If many, would the Superüberadmins adopt the redmine template?
  • Can we have a paypal account plz ? ^^
  • haxolight... we should start the discussions and come up with a date
  • PYP recordings:
    • What to do with them
    • Can we get a wireless microphone to go with the camera? (will be below 100 EUR139.359 $
      87.19 £
      121.988 CHF


syn2rbine project

  • David asking for funding for a wind turbine project.
    • magnets 12 x 5,30€
  • Q: Meeting assembly asks whether there exists a budget (for?)
  • A: no
  • Talk about type of bearings to use
  • is the project going to be funded? --> 40% upfront, remaining 60% upon completion (see Guidelines)
  • majority votes yes

sushi debriefing

  • question about non-member participation and member participation
  • marc: workshop was amazing, 13 people running around, 150 pieces of sushi made with 2kg of rice, introduced 2 sushi virgins to sushi, marc would like to recreate the workshop because everybody enjoyed themselves.
  • only 5-6 members
  • might get one more member from this workshop
  • "non-geeky" workshops attract and convince people with a "nerdy" perception that geeks are not as creepy as they thought
  • the workshop was cozy, lasted until 3:30 AM
  • workshops should be public by default but members should get a 2 week warning window to register beforehand
  • photos have gone missing!!

refrigerators & plates

  • we need more fridges
  • bartek will get 2 from jhemp and jan
  • send to mailing list: does somebody have a set of plates (non-plastic) to replace our shitty plastic plates

  • need one volunteer to communicate with kun to do organisation of the hacksquare on ccc camp 2011
  • david presents ccc camp using videos
  • -> poll on mailing list who wants to go this year, who will take responsibility of taking over communication


  • Marc presents HacKids workshops: every first Tuesday of the month
  • the question is: do we want to give free workshops to schools?
  • Kenn: we can get funding through FNR, I already spoke to the guy who decides these things
  • Kenn: it is a question of time, although marc is very motivated, how will you find other people to help you out
  • marc & bartek will write up funding proposal to FNR / MinEduc, David suggests that we should also contact SNJ to be added to list of acitivities for official helpers

general funding

  • get funding from strassen! there is a deadline!

romain's poll about

  • turn greasemonkey script into plugin? yes!


  • is it possible to limit stars showing for groups other than reporter only?


  • yes 4, no 4, 4 abstained

what to do with PYP recordings ?!

  • it should be left up to the talker whether the video be published on youtube
  • Q: who edits it?
  • A: the PR group

wireless microphone

  • should we buy one?
  • not decided yet as no particular model


  • georges presents his spreadsheet for tracking expenses

January 8th, 2011

Attention: This bootstrap meeting is on the second Saturday of the month for a change because the 1st is hangover day.


Working Groups

  • status updates
  • faccat: find consensus of how the tic board should be used
  • introducing sugar
  • general wg evaluation and feedback, aka "How would you improve the working groups?"
  • How to handle people leaving/joining wgs?


  • Proposal for using real names and no nicknames on
  • Question about the way members get reminded of their membership fees
    • When do you get the initial fee? When do you get reminded?
    • Is email the best solution?
  • Handling the storage vault. (Wuala/Dropbox/webdav or /dev/null?)
  • A database where all the members' interests are listed
  • Optional feature request: limit #users on Lusitania to historical 1198 [1]
  • Concerning "children work" (≠ Asian children work) a box on the front page where parents could "register" their children for workshops would be cool


  • Realizing regular workshop for kids & some kind of shop (everything realized with stuff, they've got on,, etc.)
  • Science Festival. CallforProposals Photos 2009


  • Buy gas-heater?
  • Buy fold-able transport boxes?

Projects & Funding

  • Idea: "Present your project"-Sessions

New members

  • who is new in the space?



  • Book aquisitions: How to do it? Does this need OK via bootstrap?

=> Best is to add to the wishlist including an abstract. Inform Library & Acquisitions of your request.

  • Haxolight, if people know of some potential places, what are the requirements? [did we have an answer on this?]
  • Member fees timing and insurance: if members quit, and don't pay the whole year, the budget previsions would be off. Last meeting stated: members pay for a full year, even if this is done via monthly payments.

Working Groups

  • status updates
    • evdev have had an internal meeting which covered potential events and ideas for 2011. Also an after event questionnaire is planned to get people's opinions. Their next meeting is 22 jan.
    • faccat presented the new tic board operation. Only people regularly visiting the space should put their marks on the blackboard. This is meant to ease the handling of multiple payments in one day or weekend, not to live on long term credit on syn2cat's costs. The maximum stays at 20€.

Buying kitchen and catering stuff is only handled by faccat. If members notice an opportunity, please contact a faccat member first, to avoid double buying. Small quantities you can still buy, at the risk to have to use it for your own needs if the syn2cat stock is full. In any case, never take money directly from the cashier! Please give the bill to a faccat member who will pay you. The wishlist on the fridge is not only for needed beverages and food, but also for any kitchen or equipment item you think is missing.

    • spila if members have interesting items, don't bring them right away to the space. There is not so much room and a lot of stuff ended up at the recycling centre. Please ask spila first if there's need.
    • pubrel has been asked to rearrange the top banner on the blog to point to the wiki pages and put the blog links to bottom or side. There will be new stickers. Pubrel also has a new member, which is also a new syn2cat member. If anyone is knowledgeable in XML and iTunes, there is a script needed to transform our radioshow into a podcast for the i-devices.
    • sysops have been asked to access the webserver statistics for optimizing the blog contents. There should be no problem to access the awstats. The questions of using google analytics was raised. Some concerns about privacy of website visitors have been raised, and the Idea is not accepted. If there is any need (new python version, new tools...) please file a ticket in redmine. There are plans to provide email facilities (including spam and virus checking) on the and domains.
    • hsoffice ADHS has been contacted today (as they were present this day) aboput the cleaning issue. They will have a general assembly next week and will tell us if our proposal is ok or they may be could offer us another solution.

A meeting is planned with the commune to discuss on several outstanding points (convention, letterbox, sattelite etc...) Members contributions will need to be raised due the the assurance cost. This will be voted on the next general assembly. Members are advised to pay the new amount (which is €9.5 or €10) already from 1st of January on.

  • sugar is a CRM (customer relationship management) tool which is in use by the office group since the very beginning of syn2cat. So it's not "another new tool". Roughly it's an evolves contact managing phonebook where you can also add exchanged emails and notes. The accounts (companies) have contacts (individuals). The use is to track communication with non-syn2cat people and groups. The advanteg compared to a spreadsheet or similar is that it's structured and won't end up with unorganized information clutter. Sugar is not available to everybody because of privacy issues. Please contact sysops for access.

This tool is not mandatory, you can still use a sheet of paper, wiki page or any other format for managing your contacts. If you find good alternatives, suggestions are welcome. A rudimetary bridge between sugar and redmine exist. To be studied if it's worth implementing.

  • How to improve the working groups?

If you want to inform yourself about what is going on in a workgroup, a good idea is to browse through their redmine pages and tickets. Note that sysops and hsoffice are not browseable. The bridge between faccat and spila is not very clear. Maybe people should join both, or even merge both working groups. => a meeting spila-faccat should be planned to clarify this.

  • How to handle people leaving/joining working groups?

The consensus is, that no restrictions or barriers should be imposed on joining a workgroup. But leaving will only be possible at a bootstrap meeting. This is mainly to remove workload from the people needing to work behind the scenes to make all this happening (sysops). Joining is generally not validated by anyone, except for hsoffice and sysops. TO have a trial period before deciding to join, members are free to assist a group meeting or talk with the group members before really joining. Are there member and group number enforcements. There is a rule of at least 1 group and max 3 groups per member and max 6 members per group. This is just a rule of thumb. Depending on workload and people's interest, the real numbers vary.


  • Proposal for using real names and no nicknames on

As this has been covered on last meeting, not much has changed. Everyone is free to choose the name he wants. If people know each other, this should not be a problem. If there is urgent need to know the identity, you can ask office.

  • Question about the way members get remembered of their membership fees
    • When do you get the initial fee? When do you get reminded?

The reminder sent out was a manual action.

    • Is email the best solution?

It will always be email as any other solution (paper, sms ...) involves cost. Some ideas for nagging people not paying came up, and vanished again.

  • Handling the storage vault. (Wuala/Dropbox/webdav or /dev/null?)

The storage contains a multitude of logos and documents which have been used in the past of syn2cat. This should be migrated from svn (the only remaining svn depot we have) into git, so one can access it from redmine.

  • A database where all the members' interests are listed

There was the project to do interviews with the members, which has not made much progress. Members could fill out on their wiki profile their interests. The proposal to use the semantic capabilities of mediawiki is accepted, so that this info becomes searchable.

  • Optional feature request: limit #users on Lusitania to historical 1198 [2] nice joke, but the ship had 2198 passengers, oh, oh, fail.
  • Concerning "children work" (≠ Asian children work) a box on the front page where parents could "register" their children for workshops would be cool. This box should populate a mailing list which we can then use to inform parents when a workshop is held.


  • Realizing regular workshop for kids & some kind of shop (everything realized with stuff, they've got on,, etc.)

On the christmas market, we noticed a big interest in electronic blinking and gaming gadgets. So the idea came to organize workshops. Start small with a couple of children. Then increase the number. The scouts were interested to cooperate.

The deadline is on 16 january! Before proposing, verify that you are available during the festival. Some ideas already came up:

    • computer science, unplugged. Have people interact physically to reproduce computer activity (binary counter, networking, calculating ...)
    • build micro robos with sensors so they can interact with environment and themselves
    • create a device with non newtonian fluid where people can play with
    • [your idea here]


  • Buy gas-heater?

For the cold events like christmas market or lasertagging. Postponed to next bootstrap. If you see gas heaters in local shops, note down the price.

  • Buy fold-able transport boxes?

Consensus is to invest in some solid stuff. Jhemp may have a ressource to get industrial grade boxes. Else the maximum budget allowed is 150€

Projects & Funding

  • Fund an OpenLase Installation (~500€) @SteveClement

Nice idea. This was not discussed in detail. Some ideas were raised to use alternatives to galvanometers (harddisks, laserdisk pickup, loudspeakers)

  • Idea: "Present your project"-Sessions

Everyone was favorable to hold a sort of lightening talks before the bootstrap meeting. This can be about potential or running projects.

  • video stream of bootstrap meeting? The idea of the meeting is to be actually together. Else everyone would stay at home. Not approved.

New members

  • who is new in the space?

Several people have joined, mainly in the media and multimedia area. Welcome!

December 4th, 2010


  • privacy of
  • bar tap board overuse
  • consequences for not respecting cleanliness of space
  • working groups status update
  • toolset workshop announcement
  • [3]


As always, please feel free to contribute to the minutes and to make amendments.

privacy of

It was voted for leaving openly and fully indexable by crawlers.

bar tap board overuse & consequences for not respecting cleanliness of space

In both cases, it was convened on a case-by-case trial. The person concerned should be invited in front of the administrative council, accompanied by the person who vouched for him/her on the membership application form. Matters should be discussed face-to-face and solutions primarily be proposed by the person standing "trial".

working groups status update

  • Faccat promised to make a serious proposal for the cleaning issue until January 8th. In the meantime, the insurance contract should be concluded.
  • Pubrel presented the idea of moving to wordpress for blogging software.
  • Evdev: Mich is preparing a table for organising those helping out on the Chrëschtmaart.
  • Server reported the successful upstream fix of a mediawiki bug.

toolset workshop announcement

No announcement was made, due to lack of the workshop leader.

Solved by Steve buying the domain.


Look up Benelux-Village at CCCamp 2011

November 7th, 2010

Power up, mega man!

MEGA Bootstrap Meeting. Yes, this meeting is exceptionally on a Sunday.


  1. Minutes
  • Important: Working Groups
  • Other
    • Member Internet Service Hosting
    • Foire de l'Etudiant 2010
    • Create accounts on for all members present who not already have one (-> PEAP::MSCHAPv2)
    • Keys
    • MemberCards
    • Application Forms/Social Contract
    • Talk about further regular events on Weekends (?!)
    • Public Relations budget?!
    • --> Newsletter (pdf, bi-monthly, preview and review)
    • Pamela-like feature for syn2cat.
    • Soldering station for doing some fancy smd soldering works.
    • For syndilight project, pre-financing for 15 RGB LEDs boards for one 7 segment display: 120€ (incl. shipping)
    • Criticism and complaints


detailed presentation of working groups (cf. wiki descriptions)

  • requirement of being able to post issues to the working groups discussed
    • -> set up in redmine
  • PR group should seek permission and confirmation of correctness before publishing materials (when publishing stuff about projects, for instance)


  • health & beauty presents cleaning bill: 253 EUR352.578 $
    220.591 £
    308.63 CHF
    / month
    • too much, should we do it ourselves?
    • clean twice a month?
      • -> Health and beauty should ask commune whether we can pay them to continue cleaning the space.
      • -> H&B should investigate options with lower frequency.
      • -> What about private (non-company) cleaning?
  • web management presents changes to login system
    • -> ldap
    • -> can we have passphrases?
    • -> can we add entropie tests for passwords?
  • events group presents foire de l'étudiant
    • presents syndelights project

discussion about membership application form

  • printed 7 forms to be filled out and handed in

request for "newsletter"-type updates of what's going on in the space

  • -> PR group should take care of this asap

rediscussion of pamela member presence system

  • yay for self-decided level of displaying information about oneself with double opt-in

soldering station

  • voted yay for most expensive model after lengthy discussion

rgb leds for syndelights

  • yay

dmx equipment

  • nay, wait whether we can borrow some
  • bulb longevity will be tested using cheap plug-in dimmer rather than dmx
  • cable compatibility will be tested using equipment at dance studio or so


  • syndelights should be more prominent
    • syndelights should become an "official" hackerspace project which will have the full support of the hackerspace
    • PR should be kept private right now because we want it to be a very cool surprise for the city but it should be talked about profusely between members

October 1st, 2010



  • chocolates missing
=> chocolates filled up from secret stockpile :-) SOLVED
  • workgroups
    • start with 2 groups, then add more later
    • one group to start with would be provisioning (consumables: eat, drink, paper...)
    • on each bootstrap every group should give a little activity report
    • people should be in maximum 3 groups to reduce overload
Note if a group does not do the work, it won't happen of course.
  • kitchen extension
    • small tabletop dishwasher from Bartek: OK
    • fridge from Jhemp (80 height) NOK
    • fridge from Jan 145hx60w: OK
  • european volunteer
    • People between 18-30years
    • needs to be coached
    • what tasks? administrative stuff, public relations, event management, cooperation with other lux. organizations, help in projects which lack time and ressources, reporter/journalist to fill in wiki or blog
  • please clean the toilets when you make a mess!
  • new locks will arrive next week
  • membercards
pdf files have been produced, will be given by Kwisatz
  • satellite dish
will be put up as we did not get any negative reaction from the commune
cable can be put without any drilling

September 4th, 2010


  • Budget
  • Etching materials?
  • Hackyversary
  • Workshop leaders required
    • Makerbot
    • PCBs, from design to etching
  • Syn2lights
  • Presentation of
    • new working groups
    • membership application form



for Books, Infrastructure, Food & Drinks and Projects got defined.


Todo: Split up infrastructure into project-based and general

Members getting funding for projects
  • members present their project on the ML
  • on the bootstrap meeting a minimum of 6 ppl have to be present for the voting (2 of which must be a member of the council)
  • ppl decide whether we can afford funding
  • if possible funding, we decide case by case how much
  • no min no max limit
  • 40% upfront .... 60% later on ... if budget allows for it
Kwisatz Kaossilator Project
  • postponed until next month ... waiting for presentation
Kwisatz GO board
  • 40€ for board + stones package

Workshop leaders

  • etching -> slopjong
  • makerbot -> gunstick (if interest) or sim0n


  • no exhibition in Galerie Spiren as there are no volunteers to help out or give ideas
  • organize a birthday party in space (Mich?, sim0n)
  • prepare slideshow to show to council and say "thanks" for the year of presence in Strassen

August 7th, 2010

Cancelled for lack of attendees.

July 3rd, 2010

Note: Extraordinarily, this meeting starts at 6pm.


  • Air conditioner
  • Working Groups
  • More regular workshop/projects
  • Getting to know people


Air conditioner

It has been concluded that Mexx should see if he can bring his air conditioner. We will have to see whether that works at all. Another solution might be simple ventilation.

Working Groups

Three to four working groups will be introduced and people are expected to join at least one, at most three groups.

Regular Workshops and Projects

People have been invited to suggest more workshops. Also, it has been suggested to more actively point to community projects like for examples Syn2lights.

Getting to know people

It has been deplored that space members don't know each other or their occupations too well. In order to resolve this issue, it has been suggested that every member be interviewed and that we have some sort of cocktail party or similar. Mich has volunteered (sort of ;)) to do the interviews.

June 5th, 2010


May 1st, 2010


  • Urgent: Chemical lab, etching equipment and table. How to handle/store acids?
  • Grill-o-matic : We need a neat BBQ, preferably one with gas
  • More questions to the commune?



  • Find a table, with or without tiles?
    • Use the table in Workroom corner?
    • Tiles would have the benefit of a wall preventing spills.
      • Inquire what tiles would cost.
  • Use for soldering also?
  • Where to put it? Do we have enough space?
  • Where to store the acids?
    • Buy Mercury 65 furniture safe from Hornbach?
  • Inquire with the commune if we can get the ADHS space once they leave for the new school?


  • Extractor hood. With tubing?
    • Find an Extractor hood or build one.

BBQ Grill

Questions for commune

Items were handled during the debate on the ChemLab.

April 3rd, 2010


  • Syn2Sign
  • Discuss further handling of and the mallory project.
  • New wifi key
  • ChillyChill
    • investment on building the bar (also future blinkenlights extension)
    • organizing transport for more new furniture and kick out the old fridge
    • discuss room arrangement
    • wall paint? which color? where?
  • Syn2Sat are we allowed to put dish on roof?
  • new Web/Mailserver (share with C3L? [cf. sysops ml])
  • Selling drinks...
  • layouts for the member cards
  • Treasury
  • Old Rack



Where signs? ADHS ok, probably no problem. On the building? Current state is difficult to see.
Number 11 on facade: how to fix? => Use the round windows for displaying 11.
The top border of the building is probably metal. Magnetically fix a sign there. Design will be handled in the Syn2Sign project.
Idea to put little life-gliders everywhere. not really.
Maps in the bus-stops could be updated with the hackerspace location => ask commune/AVL/JCD.
Recreate sign every year cheaply instead of an expensive one. Banners (callico).
Illuminated sign has to be done. Buying will be too expensive.
Has the ADHS sign been created by commune? Ask Grun signalisation for their prices.
Syn2Sign project split in several sections for every sign (street, building...)
Use the blends to spell syn2cat by using reflective tape?!

Move list to the c3l environment, as syn2cat is probably not the best place hosting it. People are invited to get pgp keys signed (by david&georges) because the list will only be allowed to signed pgp keys.

New wifi key

Has to be changed as it's used for changing alarm. Not too complex.

Ask sim0n or Kwisatz for new wifi key!


  • investment on building the bar (also future blinkenlights extension)
where to get diffuse plexi-glas?
  • organizing transport for more new furniture and kick out the old fridge
new furniture is available, can get asap.
  • discuss room arrangement
seems to be ok
  • wall paint? which color? where?
currently some neon tubes are there. to be put as indirect lighting.
kitchen: move whiteboard to other room and paint wall with magnet paint.


Are we allowed to put dish on roof? Will start after chillychill is finished.
Meeting with Strassen will be end of april.
Join us if you are interested in sat stuff!

new Web/Mailserver

Current hoster sponsors the hosting cost by having their ad. So investment will be one-time.
Also rent VMs to other clubs?
Server issue is to be further discussed on sysops mailings list.
If anyone is interested in one of the VMs, please come forward.

Selling drinks

There is no club where the buvette is done by another organization than the one doing the infrastructure. This looks like problems.
The council will have another round of debates on this.

Layouts for the member cards

will have a mag stripe for experimentation
the nickname (login in the wiki) will be on it as a barcode and of course the new logo, maybe the PGP fingerprint (40 chars).


We don't have any treasurer. steve is overbooked. We need one. Georges Toth proposes himself.

Old Rack

The new rack will get the equipment from the little mobile rack. So the old one goes where. Just on the trash?
And the new? In the hall (need rack keys) after asking the commune.


  • plastic for maker bot has arrived.
  • the two sgi machines for the museum arrived.

March 6th, 2010


  • Membership cards
  • Chemical lab
  • Wall colors (Blackboard and magnetic paint have already been bought!)
  • MakerBot


RepRap or Makerbot?

Reprap is complicated to build as it needs quite some special tools we don't have (yet). Makerbot is more expensive but can be assembled more easily. And once we have a makerbot we can still use that to create a Reprap out of thin air (well, or... almost).

Chemical lab

Need a table which is not sensitive to chemicals. Some glass panes to contain eventual fumes (from etching, soldering and anything else making smelly smoke) and an extractor to remove the fumes.

Membership cards

What layout? The new logo of course, with the name, a barcode which may be used for the library and a magstripe for people to play with. The layout should have syn2cat and user's name on both sides so the card can be used as badge on lanyard.

  • Layout: Anne
  • Producing: Gunstick
Personal tools