Ultimaker

From syn2cat - HackerSpace.lu
(Difference between revisions)
Jump to: navigation, search
(When working with the Ultimaker, pay attention to the following things:)
Line 1: Line 1:
 
==== When working with the Ultimaker, pay attention to the following things: ====
 
==== When working with the Ultimaker, pay attention to the following things: ====
*Close the Python apps when taking over from someone else or when starting from fresh. This is not necessary, but reduces the risks of running into problems.
+
* When printing small objects and objects with a very small base, ''don't print on a raft'', especially for PLA. Rafts are just a waste of plastic with a well-calibrated Z axis.
*If the extrusion head doesn't heat, flick the switch next to the USB port.
+
* Be careful not to lower or raise the bed by bumping into it. The Z axis has been carefully calibrated.
*When printing small objects and objects with a very small base, 'don't' print on a raft (even for PLA)
+
* Clean the head and bed with isopropyl alcohol before you start. If you want to be extra nice, clean the bed when you're done.
*After preparing the print, press "Print" in the main window (the one with the 3D Model) and wait for the second window to pop up. If you can't see it, look for it. Check that the Windows is called after the file you want to print. When printing several files in a row, always be sure to close the second smaller window before printing the next item or you will print the first item again (check window title).
+
* If the extrusion head doesn't heat, flick the switch next to the USB port.
*Sometimes the plastic won't stick to the surface. Cancel the print and use the controller (little box hanging on the machine) to return the extrusion head to "Auto Home". To do this, navigate (using push and scroll on the wheel) into the Menu->Prepare->Auto Home. To make it work, the plastic has to stick to the surface before it makes the raft/outline or it will only start to stick at a random moment before or during the raft, with a high risk of leaving a small drop of extra plastic.
+
* After preparing the print, press "Print" in the main window (the one with the 3D Model) and wait for the second Cura window to pop up. If you can't see it, look for it. Check that the Windows is called after the file you want to print. When printing several files in a row, always be sure to close the second smaller Cura window before printing the next item or you will print the first item again (check window title).
 +
* Sometimes the plastic won't stick to the surface. Cancel the print and use the controller (little box hanging on the machine) to return the extrusion head to "Auto Home". To do this, navigate (using push and scroll on the wheel) into the Menu->Prepare->Auto Home. To make it work, the plastic has to stick to the surface before it makes the skirt outline, or it will only start to stick at a random moment before or during the skirt, with a high risk of leaving a small drop of extra plastic. Try cleaning the bed with alcohol. If that fails, try helping the plastic filament down on the bed when the head initially lowers, or re-taping the bed. But this probably means the Z axis is de-calibrated.
 
*Don't forget to take the object off the platform before printing the next one.
 
*Don't forget to take the object off the platform before printing the next one.
  

Revision as of 04:15, 20 January 2013

Contents

When working with the Ultimaker, pay attention to the following things:

  • When printing small objects and objects with a very small base, don't print on a raft, especially for PLA. Rafts are just a waste of plastic with a well-calibrated Z axis.
  • Be careful not to lower or raise the bed by bumping into it. The Z axis has been carefully calibrated.
  • Clean the head and bed with isopropyl alcohol before you start. If you want to be extra nice, clean the bed when you're done.
  • If the extrusion head doesn't heat, flick the switch next to the USB port.
  • After preparing the print, press "Print" in the main window (the one with the 3D Model) and wait for the second Cura window to pop up. If you can't see it, look for it. Check that the Windows is called after the file you want to print. When printing several files in a row, always be sure to close the second smaller Cura window before printing the next item or you will print the first item again (check window title).
  • Sometimes the plastic won't stick to the surface. Cancel the print and use the controller (little box hanging on the machine) to return the extrusion head to "Auto Home". To do this, navigate (using push and scroll on the wheel) into the Menu->Prepare->Auto Home. To make it work, the plastic has to stick to the surface before it makes the skirt outline, or it will only start to stick at a random moment before or during the skirt, with a high risk of leaving a small drop of extra plastic. Try cleaning the bed with alcohol. If that fails, try helping the plastic filament down on the bed when the head initially lowers, or re-taping the bed. But this probably means the Z axis is de-calibrated.
  • Don't forget to take the object off the platform before printing the next one.

TODO (more or less in that order):

See also http://wiki.ultimaker.com/Calibrate

DONE:

Some links:

Paint gallery:

Personal tools
Namespaces

Variants
Actions
Navigation
syn2cat
Hackerspace
Activities
Initiatives
Community
Tools
Tools