Network hackerspace Strassen

Revision as of 00:24, 4 November 2010

Overview

Every hackerspace has a network to connect to the Internets, so does syn₂cat

Bring your laptop or use one of the available PCs, plug it in and off you go. There's also wireless LAN available.

Layout

Here's the current layout in fancy ASCII art.

DSL -- thomson -- Lusitania :::: miniswitch == wall ports in ADHS rooms
                      ||
                      ||
                  3com Rack -- photoborg
                      "
                      "
                      "
                      "
                  3com Core == wall ports in syn2cat rooms
                      ||
                      ||
                  OpenDuino, switches, HPprinter, dd-wrt

Legend:

  * -- single cable
  * == more than one cable
  * "" fiber trunk
  * ::: VLAN
  * ... wlan cable

IP

We provide both IPv4 and IPv6 connectivity in the hackerspace.

Wireless

We have two access points (APs).
One of them operates in WPA2-Enterprise mode, the other in WPA2-Personal. The WPA2-Personal AP uses the formerly published pre-shared-password (you can find it in the space).

The WPA2-Enterprise AP uses a radius server for authenticating users with their WIKI account.
Only paying sy2cat members are able to use their WIKI login to access this AP.

Use the following settings:
Security: WPA2 Enterprise
Authentication: Tunneled TLS (TTLS)
Inner authentication: PAP
Username: <wiki-user>
Password: <wiki-password>

or

Security: WPA2 Enterprise
Authentication: PEAP
Inner authentication: MSCHAPv2
Username: <syn2cat-user>
Password: <syn2cat-password>

Be sure to use exactly those settings, else it will not work.
Note: PEAP+MSCHAPv2 will only work if you have changed your password on the syn2cat server after the 12th of October. Ask an admin for more information.

Basic wpa_supplficant configuration for H4x0roam

First install the H4x0roam SSL certificate chain:

mkdir -p /etc/ssl/h4x0roam
wget http://www.hackerspace.lu/certs/syn2catCA.crt -O /etc/ssl/h4x0roam/syn2catCA.crt
wget http://www.hackerspace.lu/certs/syn2catInfr.crt -O /etc/ssl/h4x0roam/syn2catInfr.crt
wget http://www.hackerspace.lu/certs/lusitania.int.hackerspace.lu_infr.crt -O /etc/ssl/h4x0roam/lusitania.int.hackerspace.lu_infr.crt
cat /etc/ssl/h4x0roam/syn2catInfr.crt /etc/ssl/h4x0roam/syn2catCA.crt > /etc/ssl/h4x0roam/combined-ca.pem
chmod 0644 /etc/ssl/h4x0roam/*

Please note that the 2 CA certificates have to be concatenated into a single file (this does only work with PEM certificated and not with DER certificates) to make wpa_supplicant accept tier 2 certifiactes (aka "certificates issued by a sub CA or intermediate CA").

Now add the following section to your /etc/wpa_supplicant.conf (you'll obviously have to fill in your own username and password):

network={
	ssid="h4x0roam"
	bssid=00:21:29:E9:D1:AA
	key_mgmt=WPA-EAP
	eap=PEAP
	identity="YOUR HACKERSPACE USERNAME"
	password="YOUR HACKERSPACE PASSWORD"
	phase2="auth=MSCHAPV2"
	ca_cert="/etc/ssl/h4x0roam/combined-ca.pem"
	client_cert="/etc/ssl/h4x0roam/lusitania.int.hackerspace.lu_infr.crt"
}

Also make sure permissions are set correctly for wpa_supplicant:

chmod 0600 /etc/wpa_supplicant.conf

Warning: Please note that your syn2cat credentials are stored in cleartext on the hard disk unless you are using an encrypted hard disk. If you do not have an encrypted hard disk (for example due to a slow CPU), please use the advanced method with an encrypted wpa_supplicant configuration and a ramdisk.

If wpa_supplicant throws error messages like

Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

add the following line before the network={} section in your /etc/wpa_supplicant.conf:

ctrl_interface=/var/run/wpa_supplicant

SSL certificates

https://www.hackerspace.lu/certs/syn2catCA.crt https://www.hackerspace.lu/certs/syn2catInfr.crt https://www.hackerspace.lu/certs/lusitania.int.hackerspace.lu_infr.crt (updated 2010.10.12)

OS compatibility

• Linux works out of the box
  
• Windows works out of the box
  
• OSX works out of the box
  
• iphone works out of the box
  
• Android works fine with v1.6+
  
• Symbian works fine
  
• Maemo OS works fine
  

WICD template

Save this as "/etc/wicd/encryption/templates/eap-ttls" and add the filename to "/etc/wicd/encryption/templates/active". Warning: This template lacks support for SSL certificates, so MITM attacks using a spoofed H4x0roam access point during authentication are possible! Please don't use this WICD template until support for SSL certificates is added!

name = EAP-TTLS
author = username
version = 1
require identity *Identity password *Password auth *Authentication
-----
ctrl_interface=/var/run/wpa_supplicant
network={
        ssid="$_ESSID"
        scan_ssid=$_SCAN
        eap=TTLS
        key_mgmt=WPA-EAP
        identity="$_IDENTITY"
        password="$_PASSWORD"
        phase2="auth=$_AUTH"
}

Dev Links

• http://en.wikipedia.org/wiki/Extensible_Authentication_Protocol
• http://en.wikipedia.org/wiki/Protected_Extensible_Authentication_Protocol
• http://tldp.org/HOWTO/8021X-HOWTO/freeradius.html
• http://wiki.freeradius.org/WPA_HOWTO
• http://wiki.freeradius.org/SQL_HOWTO
• http://www.dslreports.com/forum/remark,9286052~mode=flat
• http://ubuntuforums.org/showthread.php?t=478804
• http://www.mail-archive.com/freeradius-users@lists.freeradius.org/msg18906.html
• http://wiki.freeradius.org/Modules
• http://www.mail-archive.com/freeradius-users@lists.cistron.nl/msg14674.html
• http://svn.dd-wrt.com:8000/dd-wrt/browser/src/router/freeradius/src/modules/rlm_python/prepaid.py