DT 800
From syn2cat - HackerSpace.lu
(Difference between revisions)
(→DT 800 RFID Reader) |
(→Device Properties) |
||
| Line 7: | Line 7: | ||
== Device Properties == | == Device Properties == | ||
| − | IP: 192.168.178.13 | + | *IP: 192.168.178.13 |
| − | Subnet: 24 (255.255.255.0) | + | *Subnet: 24 (255.255.255.0) |
| − | MAC: 00-30-FB-10-36-2B | + | *MAC: 00-30-FB-10-36-2B |
| − | Password for access via telnet 00000 (can be changed when you access it trough the display on the device | + | *Password for access via telnet 00000 (can be changed when you access it trough the display on the device |
== Swich settings == | == Swich settings == | ||
Revision as of 17:36, 21 January 2011
Contents |
DT 800 RFID Reader
We got a RFID reader from primion
Here is some information about the switch settings and other stuff
Device Properties
- IP: 192.168.178.13
- Subnet: 24 (255.255.255.0)
- MAC: 00-30-FB-10-36-2B
- Password for access via telnet 00000 (can be changed when you access it trough the display on the device
Swich settings
Here are the settings of the switch inside the divice in binary 0= down 1= up
In Normal state:
10110000
In the state were settings apear on the display(in case you mess something up with the ip or RS232 settings)
00000001
Accessing via telnet
To access the device using telnet you have to set your computers ip to something in the range of 192.168.178/24 The devices IP is 192.168.178.13
You will be asked a password. It is 00000
Now you will get almost same settings as on the display
