DT 800 RFID Reader

We got a RFID reader from primion

Here is some information about the switch settings and other stuff

Swich settings

Here are the settings of the switch inside the divice in binary 0= down 1= up

In Normal state:

10110000

In the state were settings apear on the display(in case you mess something up with the ip or RS232 settings)

00000001

To access the device using telnet you have to set your computers ip to something in the range of 192.168.178/24 The devices IP is 192.168.178.13

You will be asked a password. It is 00000

Now you will get almost same settings as on the display