Network hackerspace Strassen

From syn2cat - HackerSpace.lu
Revision as of 21:41, 5 April 2011 by Sim0n (Talk | contribs)

Jump to: navigation, search


Contents

Overview

Every hackerspace has a network to connect to the Internets, so does syn2cat

Bring your laptop or use one of the available PCs, plug it in and off you go. There's also wireless LAN available.


Layout

Here's the current layout in fancy ASCII art. 

DSL -- thomson :::: Lusitania :::: miniswitch == wall ports in ADHS rooms
                                          ||
                                          ||
                                      3com Rack -- photoborg
                                          "
                                          "
                                          "
                                          "
                                      3com Core == wall ports in syn2cat rooms
                                          ||
                                          ||
                                      OpenDuino, switches, HPprinter



Legend: 

  * -- single cable
  * == more than one cable
  * "" fiber trunk
  * ::: VLAN
  * ... wlan cable

IP

We provide both IPv4 and IPv6 connectivity in the hackerspace.

Wireless

We have two access points (APs).

The WPA2-Enterprise APs use a radius server for authenticating users with their syn2cat member account.
Use the following settings:
Security: WPA2 Enterprise
Authentication: PEAP
Inner authentication: MSCHAPv2
Username: <syn2cat login>
Password: <syn2cat password>

Be sure to use exactly those settings, else it will not work.


SSL certificates

There are a total of three certificates of interest.
We use a chained CA, making for a total of two CA certificates:
rootCA (PEM)
subCA (PEM)

And lastly for your convenience, a bundle of both in one file:
rootCA-subCA bundle (PEM)

For completeness, but you probably don't need it, the certificate of the internal server at the space:
lusitania-certificate (PEM)

You should use the CA certificates when connecting to the WiFi network (see below, your software manual or ask somebody at the space how-to), but this is not a requirement.

OS compatibility

  • Linux works out of the box
  • Windows works out of the box
  • OSX works out of the box
  • iphone works out of the box
  • Android works out of the box
  • Symbian works fine (need to install CA certificates!, see earlier)
  • Maemo OS works out of the box

OS specific hints

Arch Linux

[Howto: H4x0roam with netcfg and encrypted wpa supplicant config]]

Linux - WICD template

Save this as "/etc/wicd/encryption/templates/peap-mschapv2" and add the filename to "/etc/wicd/encryption/templates/active".

name = PEAP with MSCHAPv2
author = syn<sub>2</sub>cat version = 1
require identity *Identity password *Password
optional ca_cert *Path_to_CA_Cert
-----
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="$_ESSID"
scan_ssid=$_SCAN
proto=RSN
key_mgmt=WPA-EAP
pairwise=CCMP
eap=PEAP
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
identity="$_IDENTITY"
password="$_PASSWORD"
ca_cert="$_CA_CERT"
}

After saving and activating the template, make sure to restart the wicd daemon and client. Next do a WiFi scan and configure an AP from the space, while using the newly created template !
You may specify a path to the CA certificate (see above)....you should do this actually, but still it's optional.

Linux - wpasupplicant

First install the H4x0roam SSL certificate chain: 

mkdir -p /etc/ssl/h4x0roam
wget http://www.hackerspace.lu/certs/syn2catCA.crt -O /etc/ssl/h4x0roam/syn2catCA.crt
wget http://www.hackerspace.lu/certs/syn2catInfr.crt -O /etc/ssl/h4x0roam/syn2catInfr.crt
wget http://www.hackerspace.lu/certs/lusitania.lan.crt -O /etc/ssl/h4x0roam/lusitania.lan.crt
cat /etc/ssl/h4x0roam/syn2catInfr.crt /etc/ssl/h4x0roam/syn2catCA.crt > /etc/ssl/h4x0roam/combined-ca.pem
chmod 0644 /etc/ssl/h4x0roam/*

Please note that the 2 CA certificates have to be concatenated into a single file (this does only work with PEM certificated and not with DER certificates) to make wpa_supplicant accept tier 2 certifiactes (aka "certificates issued by a sub CA or intermediate CA").

Now add the following section to your /etc/wpa_supplicant.conf (you'll obviously have to fill in your own username and password): 

network={
	ssid="h4x0roam-kali"
	key_mgmt=WPA-EAP
	eap=PEAP
	identity="YOUR HACKERSPACE USERNAME"
	password="YOUR HACKERSPACE PASSWORD"
	phase2="auth=MSCHAPV2"
	ca_cert="/etc/ssl/h4x0roam/combined-ca.pem"
	client_cert="/etc/ssl/h4x0roam/lusitania.lan.crt"
}
network={
	ssid="h4x0roam-pussy"
	key_mgmt=WPA-EAP
	eap=PEAP
	identity="YOUR HACKERSPACE USERNAME"
	password="YOUR HACKERSPACE PASSWORD"
	phase2="auth=MSCHAPV2"
	ca_cert="/etc/ssl/h4x0roam/combined-ca.pem"
	client_cert="/etc/ssl/h4x0roam/lusitania.lan.crt"
}

Also make sure permissions are set correctly for wpa_supplicant: 

chmod 0600 /etc/wpa_supplicant.conf

Warning: Please note that your syn2cat credentials are stored in cleartext on the hard disk unless you are using an encrypted hard disk.

If wpa_supplicant throws error messages like 

Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

add the following line before the network={} section in your /etc/wpa_supplicant.conf: 

ctrl_interface=/var/run/wpa_supplicant

Nokia/Symbian phones and foo

Nokia/Symbian phones require you to install the CA certificates before they let you connect to a WPA-Enterprise network. They also mostly only support certificates in DER format.
So here go the CA certificate from above in DER format:
rootCA (DER)
subCA (DER)

Dev Links


Retrieved from "http://wiki.syn2cat.lu/w/index.php?title=Network_hackerspace_Strassen&oldid=13549"
Personal tools
Namespaces

Variants
Actions
Navigation
syn2cat
Hackerspace
Activities
Initiatives
Community
Tools
Tools