View source for Unicorn Tapeworm

== Hardware ==
[[File:Example.png|thumb|Wiring of PCB]]
The setup is compromised of :
* 1 Esp32 
* 718 RGBW LED's
* 96 RGB LED's
* 1 Mosfet 

The RGBW Strips are split in two: 
* RGBW 1 is 430 pixels long
* RGBW 2 is 288 pixels long


The Mosfet is used to short the green PSU wire with ground, this enables you to power on or off the LED's whenever you want, the ESP32 is powered by a separate micro usb cable. The PSU is an old "server" powersupply and would ideally require replacement with a more fit for purpose one. 
5V and Ground are connected to the LED strands with either some hacked together Molex connector or the Pcb. (Ground is also shared with the ESP32) 

  
*RGBW 1 -> Pin 13 
*RGBW 2 -> Pin 22
*RGB  1 -> Pin 23
*Mosfet -> Pin 15 + 3.3V